HOME

TheInfoList



OR:

A stopwatch is a
timepiece A clock or a timepiece is a device used to measure and indicate time. The clock is one of the oldest human inventions, meeting the need to measure intervals of time shorter than the natural units such as the day, the lunar month and the ...
designed to measure the amount of time that elapses between its activation and deactivation. A large digital version of a stopwatch designed for viewing at a distance, as in a sports stadium, is called a stop clock. In manual timing, the clock is started and stopped by a person pressing a button. In
fully automatic time Fully automatic time (abbreviated FAT) is a form of race timing in which the clock is automatically activated by the starting device, and the finish time is either automatically recorded, or timed by analysis of a photo finish. The system is c ...
, both starting and stopping are triggered automatically, by sensors. The timing functions are traditionally controlled by two buttons on the case. Pressing the top button starts the timer running, and pressing the button a second time stops it, leaving the elapsed time displayed. A press of the second button then resets the stopwatch to zero. The second button is also used to record ''split times'' or ''lap times''. When the split time button is pressed while the watch is running it allows the elapsed time to that point to be read, but the watch mechanism continues running to record total elapsed time. Pressing the split button a second time allows the watch to resume display of total time. Mechanical stopwatches are powered by a
mainspring A mainspring is a spiral torsion spring of metal ribbon—commonly spring steel—used as a power source in mechanical watches, some clocks, and other clockwork mechanisms. ''Winding'' the timepiece, by turning a knob or key, stores energy in ...
, which must be wound up by turning the knurled knob at the top of the stopwatch. Digital electronic stopwatches are available which, due to their
crystal oscillator A crystal oscillator is an electronic oscillator circuit that uses a piezoelectric crystal as a frequency-selective element. The oscillator frequency is often used to keep track of time, as in quartz wristwatches, to provide a stable cloc ...
timing element, are much more accurate than mechanical timepieces. Because they contain a
microchip An integrated circuit or monolithic integrated circuit (also referred to as an IC, a chip, or a microchip) is a set of electronic circuits on one small flat piece (or "chip") of semiconductor material, usually silicon. Large numbers of tiny ...
, they often include date and time-of-day functions as well. Some may have a connector for external sensors, allowing the stopwatch to be triggered by external events, thus measuring elapsed time far more accurately than is possible by pressing the buttons with one's finger. Stopwatches that count by 1/100 of a second are commonly mistaken as counting milliseconds, rather than
centisecond A millisecond (from '' milli-'' and second; symbol: ms) is a unit of time in the International System of Units (SI) equal to one thousandth (0.001 or 10−3 or 1/1000) of a second and to 1000 microseconds. A unit of 10 milliseconds may be cal ...
s. The first digital timer used in organized sports was the Digitimer, developed by Cox Electronic Systems, Inc. of Salt Lake City Utah (1962). It utilized a Nixie-tube readout and provided a resolution of 1/1000 second. Its first use was in ski racing but was later used by the World University Games in Moscow, Russia, the U.S. NCAA, and in the Olympic trials. The device is used when time periods must be measured precisely and with a minimum of complications. Laboratory experiments and
sporting event Sport pertains to any form of competitive physical activity or game that aims to use, maintain, or improve physical ability and skills while providing enjoyment to participants and, in some cases, entertainment to spectators. Sports can, t ...
s like sprints are good examples. The stopwatch function is also present as an additional function of many electronic devices such as wristwatches, cell phones, portable music players, and computers.


Human error on using stopwatch

Even though stopwatches are created to be more accurate, humans are still prone to make mistakes every time they use one. Normally, humans will take about 180–200 
milliseconds A millisecond (from ''milli-'' and second; symbol: ms) is a unit of time in the International System of Units (SI) equal to one thousandth (0.001 or 10−3 or 1/1000) of a second and to 1000 microseconds. A unit of 10 milliseconds may be called ...
to detect and respond to visual stimulus. However, in most situations where a stopwatch is used, there are indicators that the timing event is about to happen, and the manual action of starting/stopping the timer can be much more accurate. The average measurement error using manual timing was evaluated to be around 0.04 s when compared to electronic timing, in this case for a running sprint. To get more accurate results, most researchers use the propagation of uncertainty equation in order to reduce any error in experiments. Well used \sigma_Q = \sqrt *\sigma_Qis the sum of the uncertainty between \sigma_a^2 and \sigma_b^2 *\sigma_a is the value which is actually found from the experiment. *\sigma_b is the value of the uncertainty. For example: If the result from measuring the width of a window is 1.50 ± 0.05 m, 1.50 will be \sigma_a and 0.05 will be \sigma_b.


Unit

In most science experiments, researchers will normally use SI or the
International System of Units The International System of Units, known by the international abbreviation SI in all languages and sometimes pleonastically as the SI system, is the modern form of the metric system and the world's most widely used system of measurement. E ...
on any of their experiments. For stopwatches, the units of time that are generally used when observing a stopwatch are minutes, seconds, and 'one-hundredth of a second'.


Types of stopwatches

File:Schlagzahluhr stroke-timer ST-X3.jpg, Digital stopwatch File:Louis Moinet's "Compteur de Tierces".jpg, The first ever
chronograph A chronograph is a specific type of watch that is used as a stopwatch combined with a display watch. A basic chronograph has an independent sweep second hand and a minute sub-dial; it can be started, stopped, and returned to zero by successive ...
. A chronograph combines the functions of a stopwatch and a standard
watch A watch is a portable timepiece intended to be carried or worn by a person. It is designed to keep a consistent movement despite the motions caused by the person's activities. A wristwatch is designed to be worn around the wrist, attached by ...
. File:Omega Speedmaster Schumacher Edition10 36 22 158000.jpeg, Mechanical chronograph
Omega Speedmaster Omega Speedmaster is a line of chronograph wristwatches produced by Omega SA. While chronographs have been around since the late 1800s, Omega first introduced this line of chronographs in 1957. Since then, many different chronograph movements ...
having two buttons (start/stop and reset) besides the crown File:Jacques Lemans quartz chronograph watch (cropped).jpg, Chronograph with quartz movement and battery. The small red hand makes one revolvement per second, enabling a relatively high precision for time stopping operations. File: Stopwatch in casio.jpg, Stopwatch function in a Casio digital wristwatch. File: Stopwatch mode in cell phone.png, A digital stopwatch application found on an Android device.


See also

*
Chronograph A chronograph is a specific type of watch that is used as a stopwatch combined with a display watch. A basic chronograph has an independent sweep second hand and a minute sub-dial; it can be started, stopped, and returned to zero by successive ...
*
Samuel Watson (horologist) Samuel Watson (fl. c.1635-c.1710), was a horologist (clock and watch maker) who invented the 5 minute repeater, and made the first stopwatch. He made a clock for King Charles II and was an associate of Isaac Newton. Inventions In 1695 Samuel Wa ...
, maker of the first stopwatch *
Time clock A time clock, sometimes known as a clock card machine or punch clock or time recorder, is a device that records start and end times for hourly employees (or those on flexi-time) at a place of business. In mechanical time clocks, this was accomp ...
*
Timekeeper A timekeeper is an instrument or person that measures the passage of time. Person A timekeeper is a person who measures time with the assistance of a clock or a stopwatch. In addition, a timekeeper records time, time taken, or time remaining duri ...
*
Time to digital converter In electronic instrumentation and signal processing, a time-to-digital converter (TDC) is a device for recognizing events and providing a digital representation of the time they occurred. For example, a TDC might output the time of arrival for eac ...
*
Timer A timer is a specialized type of clock used for measuring specific time intervals. Timers can be categorized into two main types. The word "timer" is usually reserved for devices that counts down from a specified time interval, while devices th ...
*
The Stopwatch Gang The Stopwatch Gang was a group of three Canadians, Paddy Mitchell, Lionel Wright, and Stephen Reid, who made a living robbing banks in the United States and Canada. From 1974 to 1980, they robbed more than 140 banks and stole the equivalent of ab ...


References


External links


Open Source Physics Stop Watch Computer Model

NIST Recommended Practice Guide: Special Publication 960-12 Stopwatch and Timer Calibrations
{{Authority control Timers Portable tools