South African Class ES
   HOME

TheInfoList



OR:

The South African Railways Class ES of 1936 was an electric locomotive. In 1936, the South African Railways built two Class ES centre-cab electric shunting locomotives with a Bo+Bo wheel arrangement, based on the Class 1E mainline electric locomotive. Between then and 1964, more were acquired until a total of 24 Class ES locomotives were eventually in service. Four more were built new for industry in 1952 and 1957.Espitalier, T.J.; Day, W.A.J. (1946). ''The Locomotive in South Africa - A Brief History of Railway Development. Chapter VII - South African Railways (Continued).'' South African Railways and Harbours Magazine, April 1946. p. 296.Espitalier, T.J. (1947). ''Locomotives Designed and Built in South Africa - The S1, in service this month, is not the first locally-built engine.'' South African Railways and Harbours Magazine, October 1947. pp. 841-843.South African Railways Index and Diagrams Electric and Diesel Locomotives, 610mm and 1065mm Gauges, Ref LXD 14/1/100/20, 28 January 1975, as amended The Class ES was the fourth locomotive type to be designed and built in South Africa, after the Natal Government Railways 4-6-2TT ''Havelock'' of 1888, the Class 2C of 1910 and the Class 20 of 1935.


Design

During 1935, it was decided to replace steam shunting locomotives with electric shunting units at Daimana (Danskraal) in
Ladysmith Ladysmith may refer to: * Ladysmith, KwaZulu-Natal, South Africa * Ladysmith, British Columbia, Canada * Ladysmith, Wisconsin, United States * Ladysmith, New South Wales, Australia * Ladysmith, Virginia, United States * Ladysmith Island, Queenslan ...
. A design for a centre-cab electric shunting locomotive, based on the Class 1E mainline locomotive which was originally designed by
Metropolitan-Vickers Metropolitan-Vickers, Metrovick, or Metrovicks, was a British heavy electrical engineering company of the early-to-mid 20th century formerly known as British Westinghouse. Highly diversified, it was particularly well known for its industrial el ...
(Metrovick), was prepared by A.G. Watson, Chief Mechanical Engineer of the South African Railways (SAR) from 1929 to 1936, in collaboration with the SAR Electrical Department.


Manufacturers

The first two Class ES locomotives were built new in Pietermaritzburg, where the bodywork was constructed in the SAR workshops. Two sets of spare Class 1E power bogies, complete with traction motors and gearing, were used. The wiring, control equipment and auxiliary machinery were installed at Daimana. These two units were initially numbered E96 and E97, but they were later renumbered to E500 and E501. They entered service at Daimana in 1936 as South Africa's first purpose-built electric shunting locomotives. Even though it was not wholly a South African product with its imported Class 1E spare parts, the Class ES was the fourth recorded instance of locomotives designed and constructed in South African workshops, after the Natal Government Railways' engine ''Havelock'' of 1888, the Class 2C of 1910 and the Class 20 of 1935.Espitalier, T.J.; Day, W.A.J. (1944). ''The Locomotive in South Africa - A Brief History of Railway Development. Chapter III - Natal Government Railways''. (Continued). South African Railways and Harbours Magazine, June 1944. pp. 421-422.Espitalier, T.J.; Day, W.A.J. (1944). ''The Locomotive in South Africa - A Brief History of Railway Development. Chapter III - Natal Government Railways'' (Continued). South African Railways and Harbours Magazine, August 1944. p. 599.Espitalier, T.J.; Day, W.A.J. (1946). ''The Locomotive in South Africa - A Brief History of Railway Development. Chapter VII - South African Railways (Continued).'' South African Railways and Harbours Magazine, August 1946. pp. 630-631. Over the next 28 years, more of these locomotives were built and by 1964 24 Class ES locomotives had been placed in service by the SAR. As can be expected in a locomotive type which was built by different manufacturers over a period of almost three decades, there are differences in appearance between locomotives. Two batches of ten were built by the '' Nederlandsche Fabriek van Werktuigen en Spoorwegmaterieel'' (Werkspoor). * Series 2, numbers E124 to E133, entered service in 1938 and were later renumbered in the range from E503 to E512. * Series 3, numbers E515 to E524, entered service in 1953. Series 4, numbers E525 and E526, the last two, were rebuilt from Class 1E locomotives in the SAR shops in 1964. * No. E525 was rebuilt from Class 1E, Series 4 no. E114, originally built by Metrovick. * No. E526 was rebuilt from Class 1E, Series 5 no. E146, originally built by Swiss Locomotive and Machine Works (SLM). In 1952, two Class ES locomotives were built new for the Driefontein Consolidated Gold Mine (Dries) by Werkspoor, numbered 1 and 2. Another two were delivered new to the mine in 1957, numbered 3 and 4, also built by Werkspoor.


Characteristics

The locomotive body had three main sections. For the convenience of the driver and to afford him better outside vision, the cab was placed in the middle of the body, with the hoods of the machinery compartments tapering downwards from the cab. The "S" in the locomotive's class designation identifies it as a shunting locomotive, designed for and usually limited to yard work. With a maximum safe speed of , they ran on an overhead power supply of . Their traction motors, connected in series on each bogie, operated on 1.5 kV DC.SETS - SAR Class 1E Electric Locomotives
/ref>


Service

Although the class ES was initially largely confined to service in Natal, members of the class became quite common working on the Western Transvaal System in later years, mainly being employed around the Witwatersrand. Beginning in 1983, they were eventually replaced by the Class 8E, also a centre-cab shunting locomotive. The locomotives were known by enginemen as ''Studebakers'' since the two long hoods either side of the cab were likened to a 1947 Studebaker Commander Business Coupe.Soul of A Railway, System 7, Western Transvaal, based in Johannesburg, Part 23: Braamfontein (2) by Les Pivnic, Part 2. Caption 39.
(Accessed on 5 May 2017)
No. E511 is stored at Millsite Locomotive Depot in Krugersdorp awaiting possible restoration.


Works numbers

The builders, works numbers, years built and renumbering of the Class ES are listed in the table below.


Illustration

The main picture shows one of the first two Class ES locomotives to be built, c. 1936. Until the 1960s, they had a bottle green livery with red
buffer beam A headstock of a rail vehicle is a transverse structural member located at the extreme end of the vehicle's underframe. The headstock supports the coupling at that end of the vehicle, and may also support buffers, in which case it may also be ...
s. Some of the liveries which were applied to Class ES locomotives are illustrated below. File:SAR Class ES E 97 (Renumbered E501).jpg, Series 1 no. E97, later renumbered to no. E501, c. 1936 File:E518.jpg, Series 3 no. E518 at Danskraal, 5 December 2010 File:Dries Class ES no 1.jpg, Driefontein Consolidated Ltd. no. 1, 21 January 2009 File:Dries Class ES no 1 Cab.jpg, Cab interior of Driefontein no. 1


References

{{Locomotives of South Africa 2710 2710 B-B locomotives Bo+Bo locomotives SAR locomotives Werkspoor locomotives Metropolitan-Vickers locomotives SLM locomotives Cape gauge railway locomotives Railway locomotives introduced in 1936 1936 in South Africa