![GTAA - SolarWall](https://upload.wikimedia.org/wikipedia/commons/9/99/GTAA_-_SolarWall.jpg)
Solar air heating is a
solar thermal
Solar thermal energy (STE) is a form of energy and a technology for harnessing solar energy to generate thermal energy for use in industry, and in the residential and commercial sectors.
Solar thermal collectors are classified by the United Sta ...
technology in which the energy from the sun,
insolation
Solar irradiance is the power per unit area (surface power density) received from the Sun in the form of electromagnetic radiation in the wavelength range of the measuring instrument.
Solar irradiance is measured in watts per square metre (W/m ...
, is captured by an absorbing medium and used to heat air. Solar air heating is a
renewable energy
Renewable energy is energy that is collected from renewable resources that are naturally replenished on a human timescale. It includes sources such as sunlight, wind, the movement of water, and geothermal heat. Although most renewable energy ...
heating technology used to heat or condition air for buildings or process heat applications. It is typically the most cost-effective out of all the solar technologies, especially in commercial and industrial applications, and it addresses the largest usage of building energy in heating climates, which is space heating and industrial process heating.
Solar air collectors can be divided into two categories:
*Unglazed Air Collectors or Transpired Solar Collector (used primarily to heat ambient air in commercial, industrial, agriculture and process applications)
*Glazed Solar Collectors (recirculating types that are usually used for space heating)
Collector types
Solar collectors for air heat may be classified by their air distribution paths or by their materials, such as glazed or unglazed. For example:
* through-pass collectors
* front-pass
* back pass
* combination front and back pass collectors
* unglazed
* glazed
Unglazed air collectors and transpired solar collectors
Background
The term "unglazed air collector" refers to a solar air heating system that consists of an absorber without any glass or glazing over top. The most common type of unglazed collector on the market is the transpired solar collector. This technology was invented and patented by Canadian engineer John Hollick of
Conserval Engineering Inc. in the 1990s, who worked with the U.S. Department of Energy (
NREL
The National Renewable Energy Laboratory (NREL) in the US specializes in the research and development of renewable energy, energy efficiency, energy systems integration, and sustainable transportation. NREL is a federally funded research and d ...
) and
Natural Resources Canada
Natural Resources Canada (NRCan; french: Ressources naturelles Canada; french: RNCan, label=none)Natural Resources Canada is the applied title under the Federal Identity Program; the legal title is Department of Natural Resources (). is the depa ...
on the commercialization of the technology around the world. The technology has been extensively monitored by these government agencies, and Natural Resources Canada developed the feasibility tool RETScreen to model the energy savings from transpired solar collectors. John Hollick and the
transpired solar collector were honored by the American Society of Mechanical Engineers (ASME) in 2014 as being one of the best inventions of the industrialized age, alongside Thomas Edison, Henry Ford, the steam engine and the Panama Canal – in a New York exhibition recognizing the best inventions, inventors and engineering feats of the past two centuries.
Several thousand transpired solar collector systems have been installed in a variety of commercial, industrial, institutional, agricultural, and process applications in over 35 countries around the world. The technology was originally used primarily in industrial applications such as manufacturing and assembly plants where there were high ventilation requirements, stratified ceiling heat, and often negative pressure in the building. The first unglazed transpired collector in the world was installed by
Ford Motor Company
Ford Motor Company (commonly known as Ford) is an American multinational automobile manufacturer headquartered in Dearborn, Michigan, United States. It was founded by Henry Ford and incorporated on June 16, 1903. The company sells automobi ...
on their assembly plant in Oakville, Canada.
With the increasing drive to install renewable energy systems on buildings, transpired solar collectors are now used across the entire building stock because of high energy production (up to 500-600 peak thermal Watts/square metre), high solar conversion (up to 90%) and lower capital costs when compared against solar photovoltaic and solar water heating.
Method of operation
Unglazed air collectors heat ambient (outside) air instead of recirculated building air. Transpired solar collectors are usually wall-mounted to capture the lower sun angle in the winter heating months as well as sun reflection off the snow and achieve their optimum performance and return on investment when operating at flow rates of between 4 and 8 CFM per square foot (72 to 144 m3/h.m2) of collector area.
The exterior surface of a transpired solar collector consists of thousands of tiny micro-perforations that allow the boundary layer of heat to be captured and uniformly drawn into an air cavity behind the exterior panels. This solar heated ventilation air is drawn into the building’s ventilation system from air outlets positioned along the top of the collector and the air is then distributed in the building via conventional means or using a solar ducting system.
The extensive monitoring by Natural Resources Canada and NREL has shown that transpired solar collector systems reduce between 10-50% of the conventional heating load and that RETScreen is an accurate predictor of system performance.
Transpired solar collectors act as a rainscreen and they also capture heat loss escaping from the building envelope which is collected in the collector air cavity and drawn back into the ventilation system. There is no maintenance required with solar air heating systems and the expected lifespan is over 30 years.
Variations of transpired solar collectors
Unglazed transpired collectors can also be roof-mounted for applications in which there is not a suitable south facing wall or for other architectural considerations. A number of companies offer transpired air collectors suitable for roof mounting either mounted directly onto a sloped metal roof or as modules affixed to ducts and connected to nearby fans and HVAC units.
Higher temperatures are also possible with transpired collectors which can be configured to heat the air twice to increase the temperature rise making it suitable for space heating of larger buildings. In a 2-stage system, the first stage is the typical unglazed transpired collector and the second stage has glazing covering the transpired collector. The glazing allows all of that heated air from the first stage to be directed through a second set of transpired collectors for a second stage of solar heating.
Another innovation is to recover heat from the PV modules (which is often four times more than the electrical energy produced by the PV module) by mounting the PV modules onto the solar air system. In cases where there is a heating requirement, incorporating a solar air component into the PV system provides two technical advantages; it removes the PV heat and allows the PV system to operate closer to its rated efficiency (which is 25 C); and it decreases the total energy payback period associated with the combined system because the heat energy is captured and used to offset conventional heating.
Glazed air systems
Functioning in a similar manner as a conventional forced air furnace, systems provide heat by recirculating conditioned building air through
solar collectors. Through the use of an energy collecting surface to absorb the sun’s thermal energy, and ducting air to come in contact with it, a simple and effective collector can be made for a variety of air conditioning and process applications.
A simple solar air collector consists of an absorber material, sometimes having a
selective surface
In solar thermal collectors, a selective surface or selective absorber is a means of increasing its operation temperature and/or efficiency. The selectivity is defined as the ratio of solar radiation absorption (αsol) to thermal infrared radia ...
, to capture radiation from the sun and transfers this thermal energy to air via conduction heat transfer. This heated air is then
ducted to the building space or to the process area where the heated air is used for
space heating
Heating, ventilation, and air conditioning (HVAC) is the use of various technologies to control the temperature, humidity, and purity of the air in an enclosed space. Its goal is to provide thermal comfort and acceptable indoor air quality. HV ...
or process heating needs.
The pioneering figure for this type of system was
George Löf, who built solar heated air system for a house in Boulder, Colorado, in 1945. He later included a gravel bed for heat storage.
Through-pass air collector
In the through-pass configuration, air ducted onto one side of the absorber passes through a perforated or fibrous type material and is heated from the conductive properties of the material and the convective properties of the moving air. Through-pass absorbers have the most surface area which enables relatively high conductive heat transfer rates, but significant pressure drop can require greater fan power, and deterioration of certain absorber material after many years of solar radiation exposure can additionally create problems with air quality and performance.
Back, front, and combination passage air collector
In back-pass, front-pass, and combination type configurations the air is directed on either the back, the front, or on both sides of the absorber to be heated from the return to the supply ducting headers. Although passing the air on both sides of the absorber will provide a greater surface area for conductive heat transfer, issues with dust (fouling) can arise from passing air on the front side of the absorber which reduces absorber efficiency by limiting the amount of sunlight received. In cold climates, air passing next to the glazing will additionally cause greater heat loss, resulting in lower overall performance of the collector.
Solar air heat applications
A variety of applications can utilize solar air heat technologies to reduce the
carbon footprint
A carbon footprint is the total greenhouse gas (GHG) emissions caused by an individual, event, organization, service, place or product, expressed as carbon dioxide equivalent (CO2e). Greenhouse gases, including the carbon-containing gases carbo ...
from use of conventional heat sources, such as
fossil fuel
A fossil fuel is a hydrocarbon-containing material formed naturally in the Earth's crust from the remains of dead plants and animals that is extracted and burned as a fuel. The main fossil fuels are coal, oil, and natural gas. Fossil fuels m ...
s, to create a sustainable means to produce thermal energy. Applications such as
space heating
Heating, ventilation, and air conditioning (HVAC) is the use of various technologies to control the temperature, humidity, and purity of the air in an enclosed space. Its goal is to provide thermal comfort and acceptable indoor air quality. HV ...
, greenhouse season extension, pre-heating ventilation makeup air, or
process heat Process heat refers to the application of heat during industrial processes. Some form of process heat is used during the manufacture of many common products, from concrete to glass to steel to paper. Where byproducts or wastes of the overall indust ...
can be addressed by solar air heat devices. In the field of ‘solar co-generation’ solar thermal technologies are paired with
photovoltaic
Photovoltaics (PV) is the conversion of light into electricity using semiconducting materials that exhibit the photovoltaic effect, a phenomenon studied in physics, photochemistry, and electrochemistry. The photovoltaic effect is commercially us ...
s (PV) to increase the efficiency of the system by cooling the PV panels to improve their electrical performance while simultaneously warming air for space heating.
Space heating applications
Space heating for residential and commercial applications can be done through the use of solar air heating panels. This configuration operates by drawing air from the building envelope or from the outdoor environment and passing it through the collector where the air warms via conduction from the absorber and is then supplied to the living or working space by either passive means or with the assistance of a fan. In the older days, before air conditioning, it would get hot inside buildings, during the day times, because of heat from the sun. Even in cars, the temperature inside can exceed 50 degrees Celsius, if the windows are up and there is no need to switch on the heater
Process heat applications
Solar air heat can also be used in process applications such as drying laundry, crops (i.e. tea, corn, coffee) and other drying applications. Air heated through a solar collector and then passed over a medium to be dried can provide an efficient means by which to reduce the moisture content of the material.
Night cooling applications
Radiation cooling to the night sky is based on the principle of heat loss by long-wave radiation from a warm surface (roof) to another body at a lower temperature (sky). On a clear night, a typical sky-facing surface can cool at a rate of about 75 W/m2 (25 BTU/hr/ft2) This means that a metal roof facing the sky will be colder than the surrounding air temperature. Collectors can take advantage of this cooling phenomena. As warm night air touches the cooler surface of a transpired collector, heat is transferred to the metal, radiated to the sky and the cooled air is then drawn in through the perforated surface. Cool air may then be drawn into HVAC units. See also
Ventilation applications
By drawing air through a properly designed air collector or air heater, solar heated fresh air can reduce the heating load during sunny operation. Applications include transpired collectors preheating fresh air entering a heat recovery ventilator, or suction created by venting heated air out of some other solar chimney
:''This article refers to a device for ventilation. For the power generation technology, see Solar updraft tower.''
A solar chimney often referred to as a thermal chimney is a way of improving the natural ventilation of buildings by using convecti ...
.
See also
* Solarwall
SolarWall is the brand name of a transpired collector designed and manufactured by Conserval Engineering. Conserval Engineering is based in Toronto, Ontario, Canada.
History and design
The SolarWall design was developed in 1989 by John Hollic ...
* Passive solar building design
In passive solar building design, windows, walls, and floors are made to collect, store, reflect, and distribute solar energy, in the form of heat in the winter and reject solar heat in the summer. This is called passive solar design because, unli ...
* Passive house
"Passive house" (german: Passivhaus) is a voluntary standard for energy efficiency in a building, which reduces the building's ecological footprint. It results in ultra-low energy buildings that require little energy for space heating or coo ...
* Low-energy house
A low-energy house is characterized by an energy-efficient design and technical features which enable it to provide high living standards and comfort with low energy consumption and carbon emissions. Traditional heating and active cooling systems ...
* Zero-energy building
A Zero Energy Building (ZEB), also known as a Net Zero Energy (NZE) building, is a building with net zero energy consumption, meaning the total amount of energy used by the building on an annual basis is equal to the amount of renewable energy c ...
* List of low-energy building techniques
Low-energy buildings, which include zero-energy buildings, passive houses and green buildings, may use any of a large number of techniques to lower energy use.
The following are some of the techniques used to achieve low-energy buildings, which e ...
* Sustainable architecture
Sustainable architecture is architecture that seeks to minimize the negative environmental impact of buildings through improved efficiency and moderation in the use of materials, energy, development space and the ecosystem at large. Sustainable ...
References
{{HVAC
Heating
Solar energy
Solar architecture
Sustainable building
Low-energy building