The Society for Establishing Useful Manufactures (S.U.M.) or Society for the Establishment of Useful Manufactures was a private state-sponsored corporation founded in 1791 to promote industrial development along the Passaic River in

New Jersey New Jersey is a state in the Mid-Atlantic and Northeastern regions of the United States. It is bordered on the north and east by the state of New York; on the east, southeast, and south by the Atlantic Ocean; on the west by the Delaware ...

in the United States. The company's management of the Great Falls of the Passaic River as a powersource for

grist mills A gristmill (also: grist mill, corn mill, flour mill, feed mill or feedmill) grinds cereal grain into flour and middlings. The term can refer to either the grinding mechanism or the building that holds it. Grist is grain that has been separat ...

resulted in the growth of Paterson as one of the first industrial centers in the United States. Under the society's long-term management of the falls, the industrialization of the area passed through three great waves, centered first on

cotton Cotton is a soft, fluffy staple fiber that grows in a boll, or protective case, around the seeds of the cotton plants of the genus '' Gossypium'' in the mallow family Malvaceae. The fiber is almost pure cellulose, and can contain minor pe ...

, then steel, and finally

silk Silk is a natural protein fiber, some forms of which can be woven into textiles. The protein fiber of silk is composed mainly of fibroin and is produced by certain insect larvae to form cocoons. The best-known silk is obtained from the ...

, over the course of over 150 years. The venture is considered by historians to have been a forerunner for many

public–private partnership A public–private partnership (PPP, 3P, or P3) is a long-term arrangement between a government and private sector institutions.Hodge, G. A and Greve, C. (2007), Public–Private Partnerships: An International Performance Review, Public Adminis ...

s in later decades in the United States.

History

Alexander Hamilton's vision

The society was the brainchild of United States Assistant Secretary of the Treasury

Tench Coxe Tench Coxe (May 22, 1755July 17, 1824) was an American political economist and a delegate for Pennsylvania to the Continental Congress in 1788–1789. He wrote under the pseudonym "A Pennsylvanian," and was known to his political enemies as ...

, who convinced

United States Secretary of the Treasury The United States secretary of the treasury is the head of the United States Department of the Treasury, and is the chief financial officer of the federal government of the United States. The secretary of the treasury serves as the principal a ...

Alexander Hamilton to support the creation of a quasi-public manufacturing town. Hamilton, who had visited the Great Falls of the Passaic River in 1778, envisioned it as a planned industrial site, using the

waterfall A waterfall is a point in a river or stream where water flows over a vertical drop or a series of steep drops. Waterfalls also occur where meltwater drops over the edge of a tabular iceberg or ice shelf. Waterfalls can be formed in severa ...

as source of

mechanical power : ''For the physics concept, see .'' Mechanical power is a medical term which is a measure of the amount of energy imparted to a patient by a mechanical ventilator. While in many cases mechanical ventilation is a life-saving or life-preserving in ...

. The society was chartered by New Jersey under Hamilton's direction to exploit the falls for this planned city, which Hamilton called a "national manufactory". The enterprise was exempt from property taxes for ten years. The society founded the city of Paterson in the vicinity of the falls, naming it in honor of William Paterson, the governor of New Jersey. Hamilton commissioned civil engineer

Pierre Charles L'Enfant Pierre "Peter" Charles L'Enfant (; August 2, 1754June 14, 1825) was a French-American military engineer who designed the basic plan for Washington, D.C. (capital city of the United States) known today as the L'Enfant Plan (1791). Early life ...

, responsible for the layout of the new capital at

Washington, D.C. ) , image_skyline = , image_caption = Clockwise from top left: the Washington Monument and Lincoln Memorial on the National Mall, United States Capitol, Logan Circle, Jefferson Memorial, White House, Adams Morgan, ...

to design the system of canals known as raceways supplying the power for the

watermills A watermill or water mill is a mill that uses hydropower. It is a structure that uses a water wheel or water turbine to drive a mechanical process such as milling (grinding), rolling, or hammering. Such processes are needed in the production of ...

in the new town. The chartering of the company as a state-favored enterprise, exempt from certain taxes, became the prototype for such public-private enterprises in the 19th century. Contemporaries such as George Logan criticized the SUM for these privileges, as well as for importing what they saw as the stratified class relations and economic dependence of the Old World.

Shift in strategy

By 1796, the society's efforts to build its own mills had failed, largely because the slow profits it generated were not enough to cover its start-up costs. In 1791 the Society had brought in one Thomas Marshall, who claimed to have been superintendent of the Masson Mill in

England England is a country that is part of the United Kingdom. It shares land borders with Wales to its west and Scotland to its north. The Irish Sea lies northwest and the Celtic Sea to the southwest. It is separated from continental Europe b ...

, to take charge.Everett et al. (Slater Study Group) (2006) ''"Samuel Slater - Hero or Traitor?"'' Milford, Derbyshire: Maypole Promotions However it would seem that he was unsuccessful. Nevertheless, the society successfully promoted

real estate development Real estate development, or property development, is a business process, encompassing activities that range from the renovation and re-lease of existing buildings to the purchase of raw land and the sale of developed land or parcels to other ...

in the area, leasing sites to other private ventures to establish their own mills while maintaining control of the falls as a power source through ownership of the

dam A dam is a barrier that stops or restricts the flow of surface water or underground streams. Reservoirs created by dams not only suppress floods but also provide water for activities such as irrigation, human consumption, industrial use ...

s and raceways that supplied the mills. The company's management of the falls subsequently became a lucrative source of profits as the area became the nucleus for a burgeoning

mill Mill may refer to: Science and technology * * Mill (grinding) * Milling (machining) * Millwork * Textile mill * Steel mill, a factory for the manufacture of steel * List of types of mill * Mill, the arithmetic unit of the Analytical Engine early ...

industry. By 1815, thirteen water-powered

cotton mill A cotton mill is a building that houses spinning or weaving machinery for the production of yarn or cloth from cotton, an important product during the Industrial Revolution in the development of the factory system. Although some were driven b ...

s were operating beside the falls, operated by over 2,000 workers. As a result of the society's success in promoting industry, the population of Paterson grew from 500 in the 1790s to over 5,000 by 1820. In 1830, the society was involved in a dispute with the recently formed Morris Canal and Banking Company, which had been chartered to build a canal connecting the Passaic River to the Delaware River. The Morris Canal Company had placed a dam on the Rockaway River and diverted water for its own purposes, thus reducing the volume of flow over the falls and threatening the society's ventures. The subsequent court decision allowed the

Morris Canal The Morris Canal (1829–1924) was a common carrier anthracite coal canal across northern New Jersey that connected the two industrial canals at Easton, Pennsylvania across the Delaware River from its western terminus at Phillipsburg, New Jers ...

to be built without disrupting the water supply to the falls. The company's harnessing of the falls for mill operations was described in 1834 by publisher Thomas Gordon who wrote in the ''Gazetteer of the State of New Jersey'': :A dam of 4 feet high, strongly framed and bolted into the rock in the bed of the river above the falls, turns the stream through a canal excavated in the traprock of the bank, into a basin; whence, through strong guardgates, it supplies in succession three canals on separate planes, each below the other; giving to the mills on each, a head and fall of about 22 feet. By means of the guardgate, the volume of water is regulated at pleasure, and uniform height preserved...The expense of maintaining the dam, canals, and main sluicegates, and of regulating the water, is borne by the company.

Evolution of local industry

During the 19th century, the success of mill operations attracted many immigrants experienced in mill operations from

Scotland Scotland (, ) is a Countries of the United Kingdom, country that is part of the United Kingdom. Covering the northern third of the island of Great Britain, mainland Scotland has a Anglo-Scottish border, border with England to the southeast ...

Ireland Ireland ( ; ga, Éire ; Ulster Scots dialect, Ulster-Scots: ) is an island in the Atlantic Ocean, North Atlantic Ocean, in Northwestern Europe, north-western Europe. It is separated from Great Britain to its east by the North Channel (Grea ...

and other areas of Europe. Some artisans brought with them illegal copies of British mill operations which were subsequently duplicated in Paterson. By the 1830s, the

textile mill Textile Manufacturing or Textile Engineering is a major industry. It is largely based on the conversion of fibre into yarn, then yarn into fabric. These are then dyed or printed, fabricated into cloth which is then converted into useful goods ...

industry in the area had been surpassed by larger and better-capitalized steam-powered operations in

New England New England is a region comprising six states in the Northeastern United States: Connecticut, Maine, Massachusetts, New Hampshire, Rhode Island, and Vermont. It is bordered by the state of New York (state), New York to the west and by the Can ...

. As a result, the local mill industry shifted toward the manufacture of steel and locomotives. The

Rogers Locomotive and Machine Works Rogers Locomotive and Machine Works was a 19th-century manufacturer of railroad steam locomotives based in Paterson, in Passaic County, New Jersey, in the United States. It built more than six thousand steam locomotives for railroads around the ...

, which began operating in 1832, was the first such success. By the time of the

American Civil War The American Civil War (April 12, 1861 – May 26, 1865; also known by other names) was a civil war in the United States. It was fought between the Union ("the North") and the Confederacy ("the South"), the latter formed by states ...

, the milling of steel and the manufacture of locomotives had become the dominant industry. In the 1880s, the area became the center of the nation's

industry. The society continued operations into the 20th century but fell into decline with the abandonment of the area by industry. In 1945, the society's charter and property were acquired by the city of Paterson.

References

External links