Specifications
Snowboards are typically flat pieces ofReasons for use
When measuring snow in grass, the blades will produce inflated snow totals, whereas with a snowboard, this effect is absent. The light or white color of a snowboard serves to minimize heating by sunlight, which often occurs on paved surfaces. These qualities make snowfall measurement using a snowboard more accurate than measurements without one.Usage
Snowboards should be placed at ground level at a distance away from a building of at least two times the height of that building. When measuring snowfall on a snowboard, the snowfall is measured to the nearest . The snow may be measured as often as necessary during a 6-hour period in order to record the greatest depth on the board, since snow may both accumulate and melt during the same 6-hour period. All snow is cleaned from the snowboard once every 6 hours. At the end of the snow event, the maximum depths recorded on the snowboard during each 6-hour period are summed to provide the storm total; the same measurements during a single day are summed to produce the daily snowfall total. Usage in Canada is similar to that of the United States, with some minor differences. The board is checked every 6 hours at the synoptic hours of 12 Z, 18Z, 00Z and 06Z. The depth of snow on the board should be checked in several different places and an average depth obtained rounded to the nearest .See also
*References
{{Meteorological equipment Meteorological instrumentation and equipment