A ski binding is a device that connects a
ski boot Ski boots are footwear used in skiing to provide a way to attach the skier to skis using ski bindings. The ski/boot/binding combination is used to effectively transmit control inputs from the skier's legs to the snow.
History
Ski boots were lea ...
to the
ski
A ski is a narrow strip of semi-rigid material worn underfoot to glide over snow. Substantially longer than wide and characteristically employed in pairs, skis are attached to ski boots with ski bindings, with either a free, lockable, or partia ...
. Before the 1933 invention of
ski lifts
A ski lift is a mechanism for transporting skiers up a hill. Ski lifts are typically a paid service at ski resorts. The first ski lift was built in 1908 by German Robert Winterhalder in Schollach/ Eisenbach, Hochschwarzwald.
Types
* Aerial ...
, skiers went uphill and down and cross-country on the same gear. As ski lifts became more prevalent, skis—and their bindings—became increasingly specialized, differentiated between
alpine
Alpine may refer to any mountainous region. It may also refer to:
Places Europe
* Alps, a European mountain range
** Alpine states, which overlap with the European range
Australia
* Alpine, New South Wales, a Northern Village
* Alpine National Pa ...
(downhill) and Nordic (
cross-country,
Telemark
Telemark is a traditional region, a former county, and a current electoral district in southern Norway. In 2020, Telemark merged with the former county of Vestfold to form the county of Vestfold og Telemark. Telemark borders the traditional ...
, and
ski jumping
Ski jumping is a winter sport in which competitors aim to achieve the farthest jump after sliding down on their skis from a specially designed curved ramp. Along with jump length, competitor's aerial style and other factors also affect the fina ...
) styles of skiing. Until the point of divergence in the mid-20th century, bindings held the toe of a flexible, leather boot against the ski and allowed the heel to rise off the ski, typically with a form of strap or cable around the heel.
To address injuries resulting from falls while skiing downhill on such equipment, ski bindings emerged with the ability to release the toe of the boot sideways, in early models, and to release the boot forward and aft, in later models. Downhill ski bindings became standardized to fit plastic ski boots and incorporated a built-in brake that drags in the snow after the ski detaches from the boot.
Cross-country ski bindings evolved from being simple, bent-metal attachment plates with pins, which held a square-toed leather boot toe under a wire bale, to becoming standardized systems that held a plastic boot, attached to a bar in a recess in the boot's toe.
Back-country, jumping, and alpine touring ski bindings incorporate features found in alpine and Nordic bindings.
History
Prior to the 1840s, ski bindings were a leather strap fastened over the toe of the boot, similar to those used for snowshoes.
Norheim—ca. 1850
Sondre Norheim
Sondre Norheim, born Sondre Auverson, (10 June 1825 – 9 March 1897) was a Norwegian skier and pioneer of modern skiing. Sondre Norheim is known as the father of Telemark skiing.
Background
Sondre Auverson was born at Øverbø, a little ...
demonstrated telemark skiing before 1866, and the Open Christiania turn in 1868, both made possible with a binding design which dated back to the late 1840s. This added a loop of twisted birch roots that ran from the existing birch root toe loops around the boot heels and back. This allowed the heel to lift as before, for walking and gliding, but better held the boots to the skis allowing greater control. This enabled Norheim to control the skis with his feet and legs, replacing the former technique of dragging a large pole in the snow on one side or the other to drag the skier in that direction.
This control led to the development of the
telemark
Telemark is a traditional region, a former county, and a current electoral district in southern Norway. In 2020, Telemark merged with the former county of Vestfold to form the county of Vestfold og Telemark. Telemark borders the traditional ...
and
christiania ski turns.
Huitfeldt—1894
![Huitfeldt-bindingen](https://upload.wikimedia.org/wikipedia/commons/7/73/Huitfeldt-bindingen.JPG)
Starting in 1894, Fritz R. Huitfeldt invented a binding with a secure toe iron which allowed the heel to move freely and evolved through the 1930s as the standard design. His innovations included:
* Adding vertical metal brackets on either side of the ski to hold the ski boot (1894), augmented in 1897 by passing the iron bracket through a rectangular hole from one side of the ski to the other, before bending up the tabs.
* Passing toe straps through the rectangular hole and providing a buckle over the top of the boots, attached to the brackets and firmly bind the boot in place.
* Passing a strap over the free heel, augmented in 1904 with a cam lever substitute for the buckle over the heel, called the "Hoyer-Ellefsen toggle".
Skiers wishing to affix their heel to the ski, employed a "long-thong" strap.
Further innovations included:
*
Mathias Zdarsky's development of a ski binding that replaced the heel strap with a long metal plate under the sole of the boot, hinged at the front to allow the heel to rise, in the early 1900s. The heel was held to the plate by a short strap attaching at the back.
*
Marius Eriksen's 1920 introduction of pre-formed plates that were screwed on top of the ski.
* Guido Ruege's 1929 invention of the Kandahar binding, which incorporated a front-throw lever that tightened the heel cable past the ski-mounted toe brackets and became known as the
cable binding
Cable bindings, also known as Kandahar bindings or bear-trap bindings, are a type of ski bindings widely used through the middle of the 20th century. It was invented and brand-named after the Kandahar Ski Club in 1929 by ski racer and engineer Gui ...
.
Rottefella—1927
The
Rottefella
Rottefella is a Norwegian manufacturing company of winter sports equipment, more specifically ski bindings. The name "Rottefella" refers to the three-pin binding invented by Bror With in 1927, inspired on a couple of rat traps he had seen in a h ...
binding was developed in 1927 by
Bror With
Bror With (19 June 1900 – 9 December 1985) was a Norwegian mechanical engineer, inventor and industrialist. Bror With is perhaps most associated with his invention of the ''Rottefella'' ("Rat Trap") ski binding, which he developed in 1927. Af ...
. "Rottefella" means "rat trap" in
Norwegian
Norwegian, Norwayan, or Norsk may refer to:
*Something of, from, or related to Norway, a country in northwestern Europe
* Norwegians, both a nation and an ethnic group native to Norway
* Demographics of Norway
*The Norwegian language, including ...
. A bent, pressed-metal plate had three or four pins that stuck into the toe of a square-toed boot, which was clamped down with a metal bail. After victories at the
1928 Winter Olympics
The 1928 Winter Olympics, officially known as the II Olympic Winter Games (french: IIes Jeux olympiques d'hiver; german: II. Olympische Winterspiele; it, II Giochi olimpici invernali; rm, II Gieus olimpics d'enviern) and commonly known as St. M ...
in
St. Moritz, the binding remained the standard type for
cross-country skiing through much of the century and continues as the
Nordic Norm, manufactured by Rottefella and other companies.
Cable—1929
![Trulte-Heide-Steen-OB](https://upload.wikimedia.org/wikipedia/commons/e/e6/Trulte-Heide-Steen-OB.RD0001e.jpg)
The introduction of the cable binding allowed the
Christie turn to become a standard on downhill runs, and to further support this style of skiing the Swiss racer Guido Reuge in 1929 invented a cable binding with steel clips below the boot heel to enable clamping the heel down for downhill portions. He named the product "Kandahar" for the international
Kandahar Cup ski races.
In use in alpine races, the Kandahar binding led to serious leg injuries, and by 1939 experimentation began in earnest on bindings that would release the boot in a fall.
Saf-Ski—1937
Hjalmar Hvam Hjalmar Petterson Hvam (16 November 1902 – March 30, 1996) was a competitive Norway, Norwegian-Americans, American nordic skiing, Nordic skier and inventor of the first safety ski binding.
Early life
Hvam was born in Kongsberg, Kongsberg, Nor ...
broke his leg skiing, and while recuperating from surgery, invented the Saf-Ski toe binding in 1937, which he later sold under the slogan "Hvoom with Hvam". This was a metal clip with a pyramidal top that fit into a slot cut into the sole of the ski boot. When the boot was rotated forward, the slot on the toe eventually rose above the metal pyramid, allowing the toe to release from the ski. The system was considered with suspicion by professional skiers, especially when Olaf Rodegaard released during a race. However, Rodegaard credited the release with saving him from a broken leg.
In the post-war era, Hvam sold several thousand pairs of Saf-Ski's, in an era when alpine skiing was in its infancy. Hvam continued to sell the Saf-Ski into the 1960s, but in 1966 his insurance rates increased so dramatically that he was forced from the market.
Look Nevada—1950
The introduction of the
Look Nevada
Look's Nevada, released in 1950, was the first recognizably modern alpine ski binding. The Nevada was only the toe portion of the binding, and was used with a conventional cable binding for the heel. An updated version was introduced in 1962 with ...
in 1950 represented a significant advance in ski bindings. The Nevada held the toe centred over the ski using two metal fingers shaped into an upside-down V. The fingers were pivoted to allow motion to the sides, and centred with a spring. During a fall, sideways torsion could overcome the force of the spring and allow the boot to release directly to the side. This design was quickly copied by other vendors, notably
Marker, and had the first real impact on the dominance of the fixed-toe bindings. By the late 1950s, there were about 35 different release toe bindings on the US market,
most of which used a normal Kandahar-style heel cable.
Cubco—1950
The first modern heel-and-toe binding for alpine skiing was the Cubco binding, first introduced in 1950 but not popular until about 1960. A heel-release binding faced the problem that there was no obvious place to attach to on the heel, so the Cubco solved this by screwing small metal clips into the sole of the boot. This also eliminated the changes in performance as the sole of the boot wore down, or the geometry of the sole changed as the boot wore into the skier's foot.
Toe-release—1960s
Marker introduced the Rotomat, which gripped onto the sole where it extended past the heel, and Look quickly followed suit with their Grand Prix design. By the mid-1960s, release bindings that worked on both the heel and the toe were common, and by the late 1960s, the cable binding had disappeared from alpine skiing.
Plate systems—1970s
One problem with 1960s release bindings was that the boots were not standardized, and a binding that worked well on one boot might be dangerous on another, or might become dangerous over time as the boot shifted about. This led to the introduction of plate bindings, which used a metal plate firmly clipped to the sole of the boot, and bindings that clamped onto the plate. The plate could be easily removed for walking about. Plate bindings were popular in the US in the 1970s, notably the
BURT Retractable Bindings and
Spademan binding, but never caught on in any major way in Europe. As more and more of the alpine skiing market came under control of European companies, the plate bindings disappeared, in spite of their excellent safety records.
Standardized plastic boot-compatible systems—1970s
![Salomon bindings 1980s 2011](https://upload.wikimedia.org/wikipedia/commons/4/44/Salomon_bindings_1980s_2011.jpg)
The disappearance of the plate and alternate systems was due to a combination of factors, notably the introduction of standardized hard plastic boots. Plastic was first introduced by
Lange
Lange may refer to:
People
*Lange (surname), a German surname
* Lange (musician) (born 1974), British DJ
* Lange (Brazilian footballer) (born 1966), Brazilian footballer
Companies
* Lange (ski boots), a producer of ski boots used in alpine (dow ...
as a way of improving existing leather designs. As the new material spread through the industry, the sole piece was standardized to allow toe-and-heel bindings to clip on. Plastic had the advantages of being much firmer than leather, not changing shape over time, and having predictable friction characteristics wet or dry.The new boots and bindings could be easily adapted to any ski for any skier. Injury rates from alpine skiing began to fall with the gradual introduction of the Teflon anti-friction pad around 1972.
Nordic systems—1970s
Adidas explored an alternative to the Nordic Norm binding in 1975 with a tab protruding from the boot that was clamped down in a narrow plastic binding. Salomon produced a ski boot with a metal loop, protruding from the toe of the boot, which was clamped in its binding.
This was followed with the 1979
Salomon Nordic System binding system, which attached to a bar embedded in a slot in the toe of the ski boot. This binding configuration was emulated by Rottefella and other manufacturers as the
New Nordic Norm
A ski binding is a device that connects a ski boot to the ski. Before the 1933 invention of ski lifts, skiers went uphill and down and cross-country on the same gear. As ski lifts became more prevalent, skis—and their bindings—became increasi ...
.
Alpine
Alpine ski
''Alpine Ski'' (アルパイン・スキ一) is an Alpine skiing arcade game, released by Taito in 1981. The player controls a skier, who can move left, right, or increase forward speed. The aim is to maneuver a skier through a downhill ski cour ...
bindings have two functions: 1) Retaining the ski boot on the ski, 2) Releasing the ski boot from the ski in case of a fall to prevent injury to the skier. The retention function typically involves stepping into the binding toe-first and pressing down with the heel of the ski boot, which causes a latch to engage the heel. The release function has two principal axes of operation: forwards and back along the ski and torsionally, rotating over the top of the ski. Bindings allow a certain amount of flexure of the boot position before they release under pressure during a fall.
Each binding is set for a
DIN value that determines how readily it will release in case of a fall, based on the parameters of the skier’s height, weight, age, and ability (rated from one for beginner to three for an advanced skier). A snow brake prevents the ski from moving while it is not attached to a boot. Major manufacturers of alpine ski bindings include:
* Atomic, (also branded "Ess") pioneered the adjustable binding platform, forwards and back.
* Geze, which pioneered upward release of the toe, in case of a backwards fall.
* Look, which pioneered a turntable for the heel.
* Marker, which pioneered the toe-piece "twin-cam" articulation for releasing a boot sideways.
* Salomon, which pioneered the use of composite plastics in bindings.
* Tyrolia, which introduced the "flex" attachment system, using pins on the binding that engage holes in the boot.
Alpine touring
An
alpine touring
Ski touring is skiing in the backcountry on unmarked or unpatrolled areas. Touring is typically done off-piste and outside of ski resorts, and may extend over a period of more than one day. It is similar to backcountry skiing but excludes the u ...
(or randonee) binding allows the skier to have the heel of the ski boot free and the toe of the ski boot in the binding when using Nordic skiing techniques for ski touring, and to have both the heel and the toe of the ski boot in the binding when using
alpine skiing techniques to descend the mountain. Most touring bindings are designed for ski boots falling under one of two ISO specifications:
*ISO 5355:2019, for traditional
alpine boots. In this variation the pivot is located in the front of the binding.
*ISO 9523:2015, for boots in which the pivot is formed at the boot / binding interface.
The two setups are typically incompatible in that the principle by which they affix the boot to the ski is different. "Tech" bindings engage the ski boot with pins, which hold the toe down and engage with the heel in downhill mode. Approximately 50% of ski boots have the necessary inserts. "Frame" bindings function similarly to regular alpine bindings, gripping a welt in the heel of the boot in downhill mode.
Manufacturers of alpine touring bindings include: Atomic/Salomon, Black Diamond, Dynafit, Fritschi, Genuine Guide Gear, and Marker.
Nordic
![NN-type Rottefella binding](https://upload.wikimedia.org/wikipedia/commons/6/6f/NN-type_Rottefella_binding.jpg)
Starting in the last half of the twentieth century, three standards for
cross-country and
telemark
Telemark is a traditional region, a former county, and a current electoral district in southern Norway. In 2020, Telemark merged with the former county of Vestfold to form the county of Vestfold og Telemark. Telemark borders the traditional ...
ski bindings emerged: The 75-mm Nordic Norm (NN), the Salomon Nordic System (SNS), and the New Nordic Norm (NNN).
Ski jumping
Ski jumping is a winter sport in which competitors aim to achieve the farthest jump after sliding down on their skis from a specially designed curved ramp. Along with jump length, competitor's aerial style and other factors also affect the fina ...
bindings are specialized to the sport. Companies that manufacture nordic bindings include Alpina,
Fischer
Fischer is a German occupational surname, meaning fisherman. The name Fischer is the fourth most common German surname. The English version is Fisher.
People with the surname A
* Abraham Fischer (1850–1913) South African public official
* A ...
,
Madshus
Madshus is a Norwegian ski and ski-equipment manufacturer, located at Biri in Gjøvik. The company produces cross-country skis, ski boots and poles.
History
Madshus is one of the world's oldest ski manufacturer. The first Madshus skis wer ...
,
Rossignol, and Rottefella.
Nordic Norm (NN)
The incorporation of flexible plastics into ski boot soles allowed them to be strong torsionally and side-to-side, while retaining lengthwise flexibility and allowing the heel to rise as without the need for a cable about the heel. The Rottefella binding became standardized as the 75-mm, three-pin, Nordic Norm binding,
which was widespread by the 1970s.
["About Us"](_blank)
, Rottefella
Salomon Nordic System (SNS)
![SNS Pilot-Binding](https://upload.wikimedia.org/wikipedia/commons/1/1c/SNS_Pilot-Binding.JPG)
The Salomon Nordic System (SNS) cross-country ski binding was the first integrated boot-binding system for cross-country skis, followed by the New Nordic Norm. The first generation (SNS) employed a looped bar protruding from the sole of the ski boot. Subsequent generations engage a bar recessed in the toe of the boot and incorporate a single, thick ridge along the binding plate. The variants included:
* SNS: Attaches to a U-shaped metal bar protruding from the front of the boot
* SNS Profil: Attaches to a recessed metal bar in the toe of the boot.
* SNS Pilot: Adds a recess for a second metal bar on the boot to enhance side-to-side control.
* SNS X-Adventure: Stronger design used for back-country skiing (also referred to as SNSBC).
Pilot boots can be used with Profil bindings (Equipe models and similar, with a groove for the second Pilot axle), but Profil boots cannot be used with Pilot bindings due to the wider guide ridge of the latter.
Amer Sports
Amer Sports Oyj is a Finnish sporting goods retailer and holding company overseeing equipment brands Salomon, Arc'teryx, Peak Performance, Atomic, Suunto, Wilson, Armada, ENVE Composites, Louisville Slugger, DeMarini, and Sports Tracker. offered SNS under their Salomon and
Atomic brands.
In 2007,
Fischer
Fischer is a German occupational surname, meaning fisherman. The name Fischer is the fourth most common German surname. The English version is Fisher.
People with the surname A
* Abraham Fischer (1850–1913) South African public official
* A ...
abandoned SNS and switched entirely to NIS format of the NNN system.
New Nordic Norm (NNN)
Rottefella
Rottefella is a Norwegian manufacturing company of winter sports equipment, more specifically ski bindings. The name "Rottefella" refers to the three-pin binding invented by Bror With in 1927, inspired on a couple of rat traps he had seen in a h ...
's NNN (New Nordic Norm) cross-country ski binding has a bar in the toe of the boot hooked into a corresponding latch in the binding. Bindings are offered in several configurations, classical and skating, touring and racing. Second-generation bindings are not compatible with first-generation designs.
This system is the basis for movable and integrated binding plates that include the Nordic Integrated System, the Turnamic, and Prolink.
A heavy-duty, wider version, NNNBC, is designed for back-country skiing.
Nordic Integrated System (NIS)
The Nordic Integrated System (NIS), introduced in 2005 by
Rossignol,
Madshus
Madshus is a Norwegian ski and ski-equipment manufacturer, located at Biri in Gjøvik. The company produces cross-country skis, ski boots and poles.
History
Madshus is one of the world's oldest ski manufacturer. The first Madshus skis wer ...
,
Rottefella
Rottefella is a Norwegian manufacturing company of winter sports equipment, more specifically ski bindings. The name "Rottefella" refers to the three-pin binding invented by Bror With in 1927, inspired on a couple of rat traps he had seen in a h ...
, and
Alpina
Alpina Burkard Bovensiepen GmbH & Co. KG is an automobile manufacturing company based in Buchloe, in the Ostallgäu district of Bavaria, Germany that develops and sells high-performance versions of BMW cars.
Alpina works closely with BMW an ...
, incorporates an NNN-compatible toe attachment into an integrated binding plate on the top of the ski to which the bindings attach, allowing adjustment in the field with a metallic NIS key. The initial design of the plate used a movable insert for position adjustment, using a tool. A refinement allows for movement of the position of the binding on the plate with a locking knob, while wearing the skis. NIS skis allow installation of non-NIS bindings.
Turnamic (IFP)
In 2016, Fischer and Rossignol introduced a new "integrated fixation plate" (IFP) binding, which allows tool-less adjustment of the NNN-compatible binding position. The Turnamic binding uses step-in locking for the boot, and the lock closes or opens by turning the lever to the side.
Prolink
With the decline in sales of its SNS systems, Salomon introduced its NNN-compatible Prolink system in 2016.
New Telemark Norm (NTN)
![NTN Telemark Bindings](https://upload.wikimedia.org/wikipedia/commons/a/a5/NTN_Telemark_Bindings.jpg)
In 2007, Rottefella introduced the New Telemark Norm binding featuring lateral release, adjustability, and a freely pivoting toe attachment.
Ski jumping
Ski jumping bindings attach to the toe of square-toed plastic boots that extend above the ankles; they allow for the boot heel to rise off the skis. They are designed to release the boot, in case of a fall.
References
External links
{{DEFAULTSORT:Ski Binding
Skiing equipment
Mechanisms (engineering)