A sender was a special type of circuit in 20th-century electromechanical

telephone exchange A telephone exchange, telephone switch, or central office is a telecommunications system used in the public switched telephone network (PSTN) or in large enterprises. It interconnects telephone subscriber lines or virtual circuits of digital syst ...

s which registered the

telephone number A telephone number is a sequence of digits assigned to a landline telephone subscriber station connected to a telephone line or to a wireless electronic telephony device, such as a radio telephone or a mobile telephone, or to other devices f ...

s dialed by the subscriber, and then transmitted that information to another exchange. In some American exchange designs, for example, the No. 1 Crossbar switch there were both originating senders and terminating senders. The corresponding device in the British

director telephone system The director telephone system was a development of the Strowger or step-by-step (SXS) switching system used in London and five other large cities in the UK from the 1920s to the 1980s. A large proportion (c. 70% to 80%) of telephone traffic in ...

was called a "director" and, in other contexts, "

register Register or registration may refer to: Arts entertainment, and media Music * Register (music), the relative "height" or range of a note, melody, part, instrument, etc. * ''Register'', a 2017 album by Travis Miller * Registration (organ), the ...

History

The sender concept was developed to meet the needs of large city telephone switching systems, where the total number of subscriber lines and multiple central offices throughout the city required complex switching arrangements that were not easily handled by the direct control systems then in use, such as the step by step, or Strowger system. These limitations included inefficient trunking in large service areas, and a limited ability for growth and reorganization as additional subscribers were added. The introduction of senders into switching systems allowed the subscriber's dial pulses to be registered, then translated into a physical location on the switching fabric, either in the local office, or in a distant office. Once the sender received the translation, it directed the selectors in the switching fabric to the correct terminal, completing the connection to the called party. Because the dialed digits from the subscriber were stored, and translated, there was no direct correlation required between the dialed number, and the actual location of the trunk(s) or subscribers on the switch itself. This meant that as new telephone exchanges were added, a translation could be updated to include the new exchange without expensive and time-consuming modifications to the telephone switch. One of the first US patents filed for this concept was granted to Western Electric in 1913. This was developed in the US by the Bell System and was first widely used in the Panel Machine Switching System. As machine switching exchanges became commonplace, senders also played a critical role in communication between central offices of different types. For example, in a given city, there may be several central offices with different kinds of telephone switches that all must inter-operate with each other. As technology improved, better signaling methods were devised, but backward compatibility with existing exchanges had to be maintained. Thus, senders were developed to send and receive information in a wide variety of "protocols", including revertive pulse, MF,

dial pulse Pulse dialing is a signaling technology in telecommunications in which a direct current local loop circuit is interrupted according to a defined coding system for each signal transmitted, usually a digit. This lends the method the often used name ...

, DC key pulse, and

PCI PCI may refer to: Business and economics * Payment card industry, businesses associated with debit, credit, and other payment cards ** Payment Card Industry Data Security Standard, a set of security requirements for credit card processors * Pro ...

. The sender design was improved throughout the 20th Century and was used extensively in the No. 1 and No. 5 Crossbar switching systems.

Common-channel signaling In telecommunication, common-channel signaling (CCS), or common-channel interoffice signaling (CCIS), is the transmission of control information ''(signaling)'' via a separate channel than that used for the messages, The signaling channel usually c ...

replaced senders after the advent of

stored program control Stored program control (SPC) is a telecommunications technology for telephone exchanges. Its characteristic is that the switching system is controlled by a computer program stored in a memory in the switching system. SPC was the enabling technolog ...

. A secondary meaning within the UK broadcast engineering community is as a

synonym A synonym is a word, morpheme, or phrase that means exactly or nearly the same as another word, morpheme, or phrase in a given language. For example, in the English language, the words ''begin'', ''start'', ''commence'', and ''initiate'' are all ...

for

broadcast transmitter A broadcast transmitter is an electronic device which radiates radio waves modulated with information content intended to be received by the general public. Examples are a radio broadcasting transmitter which transmits audio (sound) to broadca ...

References

{{Telecommunications Telephony signals

History

See also

References