scientific pitch notation

Scientific pitch notation (SPN), also known as American standard pitch notation (ASPN) and international pitch notation (IPN), is a method of specifying musical pitch by combining a musical note name (with accidental if needed) and a number identifying the pitch's octave.

Although scientific pitch notation was originally designed as a companion to scientific pitch (see below), the two are not synonymous. Scientific pitch is a pitch standard—a system that defines the specific frequencies of particular pitches (see below). Scientific pitch notation concerns only how pitch names are notated, that is, how they are designated in printed and written text, and does not inherently specify actual frequencies. Thus, the use of scientific pitch notation to distinguish octaves does not depend on the pitch standard used.

Nomenclature

The notation makes use of the traditional tone names (A to G) which are followed by numbers showing which octave they are part of.

For standard A440 pitch equal temperament, the system begins at a frequency of 16.35160 Hz, which is assigned the value C₀.

The octave 0 of the scientific pitch notation is traditionally called the sub-contra octave, and the tone marked C₀ in SPN is written as '',,C'' or ''C,,'' or ''CCC'' in traditional systems, such as Helmholtz notation. Octave 0 of SPN marks the low end of what humans can actually perceive, with the average person being able to hear frequencies no lower than 20 Hz as pitches.

The octave number increases by 1 upon an ascension from B to C. Thus, ''A₀'' refers to the first A ''above'' C₀ and middle C (the one-line octave's C or simply ) is denoted as ''C₄'' in SPN. For example, C₄ is one note above B₃, and A₅ is one note above G₅.

The octave number is tied to the alphabetic character used to describe the pitch, with the division between note letters 'B' and 'C', thus:
:* "B₃" and all of its possible variants (B, B, B, B, B) would properly be designated as being in octave "3".
:* "C₄" and all of its possible variants (C, C, C, C, C) would properly be designated as being in octave "4".
:* In equal temperament "C" is same frequency as "B".

Use

Scientific pitch notation is often used to specify the range of an instrument. It provides an unambiguous means of identifying a note in terms of textual notation rather than frequency, while at the same time avoiding the transposition conventions that are used in writing the music for instruments such as the clarinet and guitar. It is also easily translated into staff notation, as needed. In describing musical pitches, nominally enharmonic spellings can give rise to anomalies where, for example in Pythagorean intonation C₄ is a lower frequency than B; but such paradoxes usually do not arise in a scientific context.

Scientific pitch notation avoids possible confusion between various derivatives of Helmholtz notation which use similar symbols to refer to different notes. For example, "C" in Helmholtz's original notation refers to the C two octaves below middle C, whereas "C" in ABC Notation refers to middle C itself. With scientific pitch notation, middle C is ''always'' C, and C is never any note but middle C. This notation system also avoids the "fussiness" of having to visually distinguish between four and five primes, as well as the typographic issues involved in producing acceptable subscripts or substitutes for them. C is much easier to quickly distinguish visually from C, than is, for example, from , and the use of simple integers (e.g. C7 and C8) makes subscripts unnecessary altogether.

Although pitch notation is intended to describe sounds audibly perceptible as pitches, it can also be used to specify the frequency of non-pitch phenomena. Notes below E or higher than E₁₀ are outside most humans' hearing range, although notes slightly outside the hearing range on the low end may still be indirectly perceptible as pitches due to their overtones falling within the hearing range. For an example of truly inaudible frequencies, when the Chandra X-ray Observatory observed the waves of pressure fronts propagating away from a black hole, their one oscillation every 10 million years was described by NASA as corresponding to the B fifty-seven octaves below middle C (B₋₅₃) or 3.235  fHz).

The notation is sometimes used in the context of meantone temperament, and does not always assume equal temperament nor the standard concert A₄ of 440  Hz; this is particularly the case in connection with earlier music.

The standard proposed to the Acoustical Society of America explicitly states a logarithmic scale for frequency, which excludes meantone temperament, and the base frequency it uses gives A₄ a frequency of exactly 440 Hz. However, when dealing with earlier music that did not use equal temperament, it is understandably easier to simply refer to notes by their closest modern equivalent, as opposed to specifying the difference using cents every time.

Table of note frequencies

The table below gives notation for pitches based on standard piano key frequencies: standard concert pitch and twelve-tone equal temperament. When a piano is tuned to just intonation, C₄ refers to the same key on the keyboard, but a slightly different frequency. Notes not produced by any piano are highlighted in medium gray, and those produced only by an extended 108-key piano, light gray.

Mathematically, given the number of semitones above middle C, the fundamental frequency in hertz is given by $440 \cdot 2^$ (see twelfth root of two). Given the MIDI NoteOn number , the frequency of the note is normally $440 \cdot 2^$ Hz, using standard tuning.

Scientific pitch versus scientific pitch ''notation''

Scientific pitch is an absolute pitch ''standard'', first proposed in 1713 by French physicist Joseph Sauveur. It was defined so that all Cs are integer powers of 2, with middle C (C₄) at 256 hertz. As already noted, it is not dependent upon, nor a part of scientific pitch ''notation'' described here. To avoid the confusion in names, scientific pitch is sometimes also called "Verdi tuning" or "philosophical pitch".

The current international pitch standard, using A₄ as exactly 440  Hz, had been informally adopted by the music industry as far back as 1926, and A440 became the official international pitch standard in 1955. SPN is routinely used to designate pitch in this system. A₄ may be tuned to other frequencies under different tuning standards, and SPN octave designations still apply (ISO 16).

With changes in concert pitch and the widespread adoption of A440 as a musical standard, new scientific frequency tables were published by the Acoustical Society of America in 1939, and adopted by the International Organization for Standardization in 1955. C₀, which was exactly 16 Hz under the scientific pitch standard, is now 16.35160 Hz under the current international standard system.

See also

* Music and mathematics
*Helmholtz pitch notation
*MIDI
* MIDI tuning standard
*Piano key frequencies
* Keyboard tablature
* Letter notation

Footnotes

References

External links

English Octave-Naming Convention
– Dolmetsch Music Theory Online
Notefreqs
– A complete table of note frequencies and ratios for midi, piano, guitar, bass, and violin. Includes fret measurements (in cm and inches) for building instruments.

{{DEFAULTSORT:Scientific Pitch Notation
Musical notation
Pitch (music)