The Santana 525 is an American

sailboat A sailboat or sailing boat is a boat propelled partly or entirely by sails and is smaller than a sailing ship. Distinctions in what constitutes a sailing boat and ship vary by region and maritime culture. Types Although sailboat terminology ...

that was designed by W. Shad Turner as a one design and

International Offshore Rule The International Offshore Rule (IOR) was a measurement rule for racing sailboats. The IOR evolved from the Cruising Club of America (CCA) rule for racer/cruisers and the Royal Ocean Racing Club (RORC) rule. Rule context - past and present rating ...

Quarter Ton class Quarter Ton Class is an offshore sailing class of the International Offshore Rule racing the Quarter Ton Cup between 1967 and 1996 and from 2005 till now. The class is sailed by smaller keelboats of similar size and is likely the world's most produ ...

racer-

cruiser A cruiser is a type of warship. Modern cruisers are generally the largest ships in a fleet after aircraft carriers and amphibious assault ships, and can usually perform several roles. The term "cruiser", which has been in use for several hu ...

and first built in 1977.

Production

The design was built by

W. D. Schock Corp The W. D. Schock Corporation (usually styled W. D. Schock Corp) is an American boat builder originally based in Newport Beach, California, later in Corona, California and currently located in Santa Ana, California. The company was founded by Wi ...

in the United States, between 1977 and 1982, with 261 boats completed, but it is now out of production.

Design

The Santana 525 is a racing

keelboat A keelboat is a riverine cargo-capable working boat, or a small- to mid-sized recreational sailing yacht. The boats in the first category have shallow structural keels, and are nearly flat-bottomed and often used leeboards if forced in open wat ...

, built predominantly of

fiberglass Fiberglass (American English) or fibreglass (Commonwealth English) is a common type of fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened into a sheet called a chopped strand mat, or woven into glass cloth ...

, with wood trim. It has a fractional

sloop A sloop is a sailboat with a single mast typically having only one headsail in front of the mast and one mainsail aft of (behind) the mast. Such an arrangement is called a fore-and-aft rig, and can be rigged as a Bermuda rig with triangular sa ...

rig, a

raked stem The stem is the most forward part of a boat or ship's bow and is an extension of the keel itself. It is often found on wooden boats or ships, but not exclusively. Description The stem is the curved edge stretching from the keel below, up to ...

, a

reverse transom A transom is the vertical reinforcement which strengthens the stern of a boat. This flat termination of the stern is typically above the waterline. The term was used as far back as Middle English in the 1300s, having come from Latin ''transvers ...

, an internally mounted spade-type

rudder A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, aircraft, or other vehicle that moves through a fluid medium (generally aircraft, air or watercraft, water). On an aircraft the rudder is used primarily to ...

controlled by a

tiller A tiller or till is a lever used to steer a vehicle. The mechanism is primarily used in watercraft, where it is attached to an outboard motor, rudder post or stock to provide leverage in the form of torque for the helmsman to turn the rudder. ...

and a fixed fin

keel The keel is the bottom-most longitudinal structural element on a vessel. On some sailboats, it may have a hydrodynamic and counterbalancing purpose, as well. As the laying down of the keel is the initial step in the construction of a ship, in Br ...

. It displaces and carries of ballast. The boat has a draft of with the standard keel and is normally fitted with a small

outboard motor An outboard motor is a propulsion system for boats, consisting of a self-contained unit that includes engine, gearbox and propeller or jet drive, designed to be affixed to the outside of the transom. They are the most common motorised method ...

for docking and maneuvering. The design has sleeping accommodation for four people, with a double

"V"-berth A berth is a bed or sleeping accommodation on vehicles. Space accommodations have contributed to certain common design elements of berths. Beds in boats or ships While beds on large ships are little different from those on shore, the lack ...

in the bow cabin and a two straight settee berths in the main cabin. The

galley A galley is a type of ship that is propelled mainly by oars. The galley is characterized by its long, slender hull, shallow draft, and low freeboard (clearance between sea and gunwale). Virtually all types of galleys had sails that could be used ...

is located on both sides of the

companionway In the architecture of a ship, a companion or companionway is a raised and windowed hatchway in the ship's deck, with a ladder leading below and the hooded entrance-hatch to the main cabins. A companionway may be secured by doors or, commonly in ...

ladder. The

head A head is the part of an organism which usually includes the ears, brain, forehead, cheeks, chin, eyes, nose, and mouth, each of which aid in various sensory functions such as sight, hearing, smell, and taste. Some very simple animals may ...

is located in the bow cabin, centered under the "V"-berth. For sailing the design may be equipped with one of a number of

jib A jib is a triangular sail that sets ahead of the foremast of a sailing vessel. Its tack is fixed to the bowsprit, to the bows, or to the deck between the bowsprit and the foremost mast. Jibs and spinnakers are the two main types of headsails ...

s and genoas. For sailing downwind the design may be equipped with a symmetrical

spinnaker A spinnaker is a sail designed specifically for sailing off the wind on courses between a reach (wind at 90° to the course) to downwind (course in the same direction as the wind). Spinnakers are constructed of lightweight fabric, usually n ...

of . The design has a typical

PHRF Performance Handicap Racing Fleet (PHRF) is a handicapping system used for yacht racing in North America. It allows dissimilar classes of sailboats to be raced against each other. The aim is to cancel out the inherent advantages and disadvantages ...

racing average handicap of 186 and a

hull speed Hull speed or displacement speed is the speed at which the wavelength of a vessel's bow wave is equal to the waterline length of the vessel. As boat speed increases from rest, the wavelength of the bow wave increases, and usually its crest-to-tro ...

of .

Operational history

The boat is supported by an active class club that organizes racing events, the ''Santana 525 One Design Class Association''. The largest fleet of Santana 525s is in

Kelowna, British Columbia Kelowna ( ) is a city on Okanagan Lake in the Okanagan Valley in the southern interior of British Columbia, Canada. It serves as the head office of the Regional District of Central Okanagan. The name Kelowna derives from the Okanagan word ''ki� ...

, Canada.

References

External links

Photo of a Santana 525 showing the keel and hull shape
{{WD Schock Corp Keelboats 1970s sailboat type designs Sailing yachts Sailboat type designs by W. Shad Turner Sailboat types built by W. D. Schock Corp

Production

Design

Operational history

See also

References

External links