An S-cam is part of a
braking
A brake is a mechanical device that inhibits motion by absorbing energy from a moving system. It is used for slowing or stopping a moving vehicle, wheel, axle, or to prevent its motion, most often accomplished by means of friction.
Background ...
system used in heavy vehicles such as
truck
A truck or lorry is a motor vehicle designed to transport cargo, carry specialized payloads, or perform other utilitarian work. Trucks vary greatly in size, power, and configuration, but the vast majority feature body-on-frame construction ...
s and wheeled machinery. It consists of a shaft, usually around 4 to 25 inches long, turned at one end by means of an air-powered brake booster and lever with an 'S' shaped cam at the wheel end. Turning the shaft pushes the brake shoes against the
drum
The drum is a member of the percussion group of musical instruments. In the Hornbostel-Sachs classification system, it is a membranophone. Drums consist of at least one membrane, called a drumhead or drum skin, that is stretched over a she ...
, producing
friction
Friction is the force resisting the relative motion of solid surfaces, fluid layers, and material elements sliding against each other. There are several types of friction:
*Dry friction is a force that opposes the relative lateral motion of t ...
.
The design allows bulky air cylinders to be located outside of the wheel.
Uses
The S-cam is generally used in heavy trucking applications or commercial vehicles where an air supply is readily available from the vehicle. It is normally powered by air, but hydraulic power can be used too.
The S-cam foundation brake is being used in over 85% of vehicles in the U.S. that run with air brakes.
S-cam's are only used with drum brakes because the cam pushes on the brakes which rubs against the rotating drum, and thus slowing the vehicle. Drum brakes are favored on bigger vehicles because they allow more surface area in brake pads to get a heavier load slowed down more efficiently.
How it Works
The driver of the vehicle that is either supplied by hydraulic or air power, presses the brake pedal which sends power to a diaphragm. This diaphragm sends the motion to a push rod that rotates the shaft connected to the S-cam. As the S-cam rotates, the two symmetrical brake pads are forced against the brake drum until the pressure is released and the brake pads return to their resting position.
The principle of the S-cam allows the brakes of big vehicles to be more compact and less moving parts, since it only relies on a rotating shaft. Generally speaking, a tractor trailer requires more brakes than a typical vehicle, so making the brakes as simple and as cost effective as possible is very important.
S-cams are very efficient at keeping brakes maintained because as the brake pad wears, the S-cam rotates more and causes the pads to further. Since the lobes on the S-cam increase in radius as it is turned, the brake pads linear motion is increased. Of course you want to adjust your brakes regularly to ensure there is no slack in your brake system and that your brakes are responsive.
See also
*
Cam
Calmodulin (CaM) (an abbreviation for calcium-modulated protein) is a multifunctional intermediate calcium-binding messenger protein expressed in all eukaryotic cells. It is an intracellular target of the secondary messenger Ca2+, and the bin ...
*
Drum Brake
A drum brake is a brake that uses friction caused by a set of shoes or pads that press outward against a rotating cylinder-shaped part called a brake drum.
The term ''drum brake'' usually means a brake in which shoes press on the inner surfac ...
References
External links
*
{{DEFAULTSORT:S-Cam
Auto parts