The S-II (pronounced "S-two") was the second stage of the

Saturn V Saturn V is a retired American super heavy-lift launch vehicle developed by NASA under the Apollo program for human exploration of the Moon. The rocket was human-rated, with three stages, and powered with liquid fuel. It was flown from 196 ...

rocket. It was built by

North American Aviation North American Aviation (NAA) was a major American aerospace manufacturer that designed and built several notable aircraft and spacecraft. Its products included: the T-6 Texan trainer, the P-51 Mustang fighter, the B-25 Mitchell bomber, the F ...

. Using

liquid hydrogen Liquid hydrogen (LH2 or LH2) is the liquid state of the element hydrogen. Hydrogen is found naturally in the molecular H2 form. To exist as a liquid, H2 must be cooled below its critical point of 33 K. However, for it to be in a fully l ...

(LH2) and

liquid oxygen Liquid oxygen—abbreviated LOx, LOX or Lox in the aerospace, submarine and gas industries—is the liquid form of molecular oxygen. It was used as the oxidizer in the first liquid-fueled rocket invented in 1926 by Robert H. Goddard, an app ...

(LOX) it had five J-2 engines in a

quincunx A quincunx () is a geometric pattern consisting of five points arranged in a cross, with four of them forming a square or rectangle and a fifth at its center. The same pattern has other names, including "in saltire" or "in cross" in heraldry (d ...

pattern. The second stage accelerated the Saturn V through the upper atmosphere with of thrust.

History

The beginning of the S-II came in December 1959 when a committee recommended the design and construction of a high-thrust,

fueled engine. The contract for this engine was given to

Rocketdyne Rocketdyne was an American rocket engine design and production company headquartered in Canoga Park, in the western San Fernando Valley of suburban Los Angeles, in southern California. The Rocketdyne Division was founded by North American Avia ...

and it would be later called the J-2. At the same time the S-II stage design began to take shape. Initially it was to have four J-2 engines and be in length and in diameter. In 1961 the Marshall Space Flight Center began the process to find the contractor to build the stage. Out of the 30 aerospace companies invited to a conference where the initial requirements were laid out, only seven submitted proposals a month later. Three of these were eliminated after their proposals had been investigated. However it was then decided that the initial specifications for the entire rocket were too small and so it was decided to increase the size of the stages used. This raised difficulties for the four remaining companies as

NASA The National Aeronautics and Space Administration (NASA ) is an independent agency of the US federal government responsible for the civil space program, aeronautics research, and space research. NASA was established in 1958, succeeding t ...

had still not yet decided on various aspects of the stage including size, and the upper stages that would be placed on top. In the end on 11 September 1961 the contract was awarded to

(who were also awarded the contract for the Apollo Command/Service Module), with the manufacturing plant built by the government at

Seal Beach Seal Beach is a coastal city in Orange County, California, United States. As of the 2020 United States census, 2020 census, the population was 25,242, up from 24,168 at the 2010 United States census, 2010 census. Seal Beach is located in the w ...

California California is a U.S. state, state in the Western United States, located along the West Coast of the United States, Pacific Coast. With nearly 39.2million residents across a total area of approximately , it is the List of states and territori ...

Configuration

When fully loaded with propellant, the S-II had a mass of about 481

tonne The tonne ( or ; symbol: t) is a unit of mass equal to 1000 kilograms. It is a non-SI unit accepted for use with SI. It is also referred to as a metric ton to distinguish it from the non-metric units of the short ton ( United State ...

s. The hardware was only 7.6% of this—92.4% was liquid hydrogen and liquid oxygen. At the bottom was the thrust structure supporting five J-2 engines in a

arrangement. The center engine was fixed, while the other four were

gimbal A gimbal is a pivoted support that permits rotation of an object about an axis. A set of three gimbals, one mounted on the other with orthogonal pivot axes, may be used to allow an object mounted on the innermost gimbal to remain independent of ...

led, similar to the engines on the S-IC stage below. Instead of using an ''intertank'' (empty container between tanks) like the S-IC, the S-II used a common bulkhead (similar to that of the

S-IV The S-IV was the second stage of the Saturn I rocket used by NASA for early flights in the Apollo program. The S-IV was manufactured by the Douglas Aircraft Company and later modified by them to the S-IVB, a similar but distinct stage used on t ...

and

S-IVB The S-IVB (pronounced "S-four-B") was the third stage on the Saturn V and second stage on the Saturn IB launch vehicles. Built by the Douglas Aircraft Company, it had one J-2 rocket engine. For lunar missions it was fired twice: first for Earth ...

stages) that included both the top of the LOX tank and bottom of the LH2 tank. It consisted of two

aluminium Aluminium (aluminum in American and Canadian English) is a chemical element with the symbol Al and atomic number 13. Aluminium has a density lower than those of other common metals, at approximately one third that of steel. I ...

sheets separated by a honeycomb structure made of

phenolic resin Phenol formaldehyde resins (PF) or phenolic resins (also infrequently called phenoplasts) are synthetic polymers obtained by the reaction of phenol or substituted phenol with formaldehyde. Used as the basis for Bakelite, PFs were the first commerc ...

. It insulated a temperature differential between the two tanks. The use of a common bulkhead saved 3.6 tonnes in weight, both by eliminating one bulkhead and by reducing the overall length of the stage. The

LOX Liquid oxygen—abbreviated LOx, LOX or Lox in the aerospace, submarine and gas industries—is the liquid form of molecular oxygen. It was used as the oxidizer in the first liquid-fueled rocket invented in 1926 by Robert H. Goddard, an appli ...

tank was an ellipsoidal container of 10 meters diameter and 6.7 meters high holding up to or of oxidizer. It was formed by welding 12 gores (large triangular sections) and two circular pieces for the top and bottom. The gores were shaped by positioning in a 211,000 liter tank of water with three carefully orchestrated sets of underwater explosions to shape each gore. The

LH2 Liquid hydrogen (LH2 or LH2) is the liquid state of the element hydrogen. Hydrogen is found naturally in the molecular H2 form. To exist as a liquid, H2 must be cooled below its critical point of 33 K. However, for it to be in a fully liq ...

tank was constructed of six cylinders: five were 2.4 meters high and the sixth 0.69 meter high. The biggest challenge was the insulation. Liquid hydrogen must be kept colder than about 20 °C above absolute zero () so good insulation is very important. Initial attempts did not work well: there were bonding issues and air pockets. Initially the stage was insulated with a honeycomb material. These panels had grooves milled in the back which were purged with helium during filling. The final method was to spray insulation on by hand and trim the excess. This change saved both weight and time and avoided the issues with air pockets entirely. The LH2 tank volume was for storing of liquid hydrogen. The S-II was constructed vertically to aid welding and keep the large circular sections in the correct shape.

Stages built

References

*
Apollo Saturn Reference Page
{{DEFAULTSORT:S-Ii Apollo program Rocket stages

History

Configuration

Stages built

See also

References