The following is a list of RAL Classic colours
from the
RAL colour standard
RAL is a colour management system used in Europe that is created and administrated by the German (RAL non-profit LLC), which is a subsidiary of the German . In colloquial speech RAL refers to the RAL Classic system, mainly used for varnish a ...
. The visual samples are approximate and informative only.
RAL Classic
Yellow and beige
Orange
Red
Violet
Blue
Green
Grey
Brown
White and black
Overview
Below is a list of RAL Classic colours
from the
RAL colour standard
RAL is a colour management system used in Europe that is created and administrated by the German (RAL non-profit LLC), which is a subsidiary of the German . In colloquial speech RAL refers to the RAL Classic system, mainly used for varnish a ...
. Alongside every colour, the corresponding values are given for:
*
hexadecimal triplet for the
sRGB
sRGB is a standard RGB (red, green, blue) color space that HP and Microsoft created cooperatively in 1996 to use on monitors, printers, and the World Wide Web. It was subsequently standardized by the International Electrotechnical Commission ...
colour space, approximating the given RAL colour
*
sRGB value
* Grey value calculated from (0.2126 × red) + (0.7152 × green) + (0.0722 × blue)
*
CIE L*a*b* values
* sRGB value expressed as hue, saturation and lightness (HSL)
* device-independent
CMYK
The CMYK color model (also known as process color, or four color) is a subtractive color model, based on the CMY color model, used in color printing, and is also used to describe the printing process itself. The abbreviation ''CMYK'' refers ...
value: cyan, magenta, yellow, black or key
*
LRV, but a consistent light reflectance value is not obtainable from pearlescent or metallic colours
The visual samples displayed on the screen are not binding because brightness and contrast may vary from screen to screen – and neither are the colours on a printout from a printer. For binding colour samples, always obtain an official RAL Colour fan deck.
RAL Effect
RAL Design System+
In the RAL Design System Plus, there are groups of colours every 10° of hue and additionally at 75°, 85° and 95°. Possible lightness values are 15% through 90% in steps of 5% for monochromatic shades of gray (i.e. C = 0%) and 20% through 90% in steps of 10% and additionally 85% and 93%. Chroma values are also mostly confined to steps of 10% or 5%, but with some exceptions, and the maximum value varies.
References
{{Colour topics, state=collapsed
RAL color standard
Ral