Context
It is generally used to achieve improvements in fields such as the establishment of safe minimum levels of maintenance, changes to operating procedures and strategies and the establishment of capital maintenance regimes and plans. Successful implementation of RCM will lead to increase in cost effectiveness, machine uptime, and a greater understanding of the level of risk that the organization is managing. John Moubray characterized RCM as a process to establish the safe minimum levels of maintenance. This description echoed statements in the Nowlan and Heap report from United Airlines. It is defined by the technical standard SAE JA1011, Evaluation Criteria for RCM Processes, which sets out the minimum criteria that any process should meet before it can be called RCM. This starts with the seven questions below, worked through in the order that they are listed: :1. What is the item supposed to do and its associated performance standards? :2. In what ways can it fail to provide the required functions? :3. What are the events that cause each failure? :4. What happens when each failure occurs? :5. In what way does each failure matter? :6. What systematic task can be performed proactively to prevent, or to diminish to a satisfactory degree, the consequences of the failure? :7. What must be done if a suitable preventive task cannot be found? Reliability centered maintenance is an engineering framework that enables the definition of a complete maintenance regimen. It regards maintenance as the means to maintain the functions a user may require of machinery in a defined operating context. As a discipline it enables machinery stakeholders to monitor, assess, predict and generally understand the working of their physical assets. This is embodied in the initial part of the RCM process which is to identify the operating context of the machinery, and write a Failure Mode Effects and Criticality Analysis (FMECA). The second part of the analysis is to apply the "RCM logic", which helps determine the appropriate maintenance tasks for the identified failure modes in the FMECA. Once the logic is complete for all elements in the FMECA, the resulting list of maintenance is "packaged", so that the periodicities of the tasks are rationalised to be called up in work packages; it is important not to destroy the applicability of maintenance in this phase. Lastly, RCM is kept live throughout the "in-service" life of machinery, where the effectiveness of the maintenance is kept under constant review and adjusted in light of the experience gained. RCM can be used to create a cost-effective maintenance strategy to address dominant causes of equipment failure. It is a systematic approach to defining a routine maintenance program composed of cost-effective tasks that preserve important functions. The important functions (of a piece of equipment) to preserve with routine maintenance are identified, their dominant failure modes and causes determined and the consequences of failure ascertained. Levels of criticality are assigned to the consequences of failure. Some functions are not critical and are left to "run to failure" while other functions must be preserved at all cost. Maintenance tasks are selected that address the dominant failure causes. This process directly addresses maintenance preventable failures. Failures caused by unlikely events, non-predictable acts of nature, etc. will usually receive no action provided their risk (combination of severity and frequency) is trivial (or at least tolerable). When the risk of such failures is very high, RCM encourages (and sometimes mandates) the user to consider changing something which will reduce the risk to a tolerable level. The result is a maintenance program that focuses scarce economic resources on those items that would cause the most disruption if they were to fail. RCM emphasizes the use ofBackground
The term "reliability-centered maintenance" authored by Tom Matteson, Stanley Nowlan and Howard Heap ofBasic features
The RCM process described in the DOD/UAL report recognized three principal risks from equipment failures: threats * to safety, * to operations, and * to the maintenance budget. Modern RCM gives threats to the environment a separate classification, though most forms manage them in the same way as threats to safety. RCM offers five principal options among the risk management strategies: * Predictive maintenance tasks, * Preventive Restoration or Preventive Replacement maintenance tasks, * Detective maintenance tasks, * Run-to-Failure, and * One-time changes to the "system" (changes to hardware design, to operations, or to other things). RCM also offers specific criteria to use when selecting a risk management strategy for a system that presents a specific risk when it fails. Some are technical in nature (can the proposed task detect the condition it needs to detect? does the equipment actually wear out, with use?). Others are goal-oriented (is it reasonably likely that the proposed task-and-task-frequency will reduce the risk to a tolerable level?). The criteria are often presented in the form of a decision-logic diagram, though this is not intrinsic to the nature of the process.In use
After being created by the commercial aviation industry, RCM was adopted by the U.S. military (beginning in the mid-1970s) and by the U.S. commercial nuclear power industry (in the 1980s). Starting in the late 1980s, an independent initiative led by John Moubray corrected some early flaws in the process, and adapted it for use in the wider industry. Moubray was also responsible for popularizing the method and for introducing it to much of the industrial community outside of the aviation industry. In the two decades since this approach (called by the author RCM2) was first released, industry has undergone massive change with advances in lean thinking and efficiency methods. At this point in time many methods sprung up that took an approach of reducing the rigour of the RCM approach. The result was the propagation of methods that called themselves RCM, yet had little in common with the original concepts. In some cases these were misleading and inefficient, while in other cases they were even dangerous. Since each initiative is sponsored by one or more consulting firms eager to help clients use it, there is still considerable disagreement about their relative dangers (or merits). The RCM standardSee also
*Notes
References
* * * * * * * * * * *Further reading