Reel Life Productions Artists
   HOME

TheInfoList



OR:

A reel is an object around which a length of another material (usually long and flexible) is wound for storage (usually
hose A hose is a flexible hollow tube designed to carry fluids from one location to another. Hoses are also sometimes called ''pipes'' (the word ''pipe'' usually refers to a rigid tube, whereas a hose is usually a flexible one), or more generally '' ...
are wound around a reel). Generally a reel has a
cylindrical A cylinder (from ) has traditionally been a three-dimensional solid, one of the most basic of curvilinear geometric shapes. In elementary geometry, it is considered a prism with a circle as its base. A cylinder may also be defined as an infini ...
core (known as a '' spool'') with flanges around the ends (known as the ''rims'') to retain the material wound around the core. In most cases the core is hollow in order to pass an
axle An axle or axletree is a central shaft for a rotating wheel or gear. On wheeled vehicles, the axle may be fixed to the wheels, rotating with them, or fixed to the vehicle, with the wheels rotating around the axle. In the former case, bearing ...
and allow the reel to rotate like a
wheel A wheel is a circular component that is intended to rotate on an axle Bearing (mechanical), bearing. The wheel is one of the key components of the wheel and axle which is one of the Simple machine, six simple machines. Wheels, in conjunction wi ...
, and
crank Crank may refer to: Mechanisms * Crank (mechanism), in mechanical engineering, a bent portion of an axle or shaft, or an arm keyed at right angles to the end of a shaft, by which motion is imparted to or received from it * Crankset, the compone ...
or handles may exist for manually turning the reel, while others are operated by (typically electric) motors.


Construction

The size of the core is dependent on several factors. A smaller core will obviously allow more material to be stored in a given space. However, there is a limit to how tightly the stored material can be wound without damaging it and this limits how small the core can be. Other issues affecting the core size include: * Mechanical strength of the core (especially with big reels) * Acceptable turning speed (for a given rate of material moving on or off the reel a smaller core will mean that an almost empty reel has to turn faster) * any functional requirements of the core e.g. ** For a reel that must be mechanically turned the size of the grips that mount it on the mechanical turning device. ** The size of the mountings needed to support the core during unwinding. ** Anything mounted on the cores (e.g. the sockets on an extension reel) With material such as
photographic film Photographic film is a strip or sheet of transparent film base coated on one side with a gelatin photographic emulsion, emulsion containing microscopically small light-sensitive silver halide crystals. The sizes and other characteristics of th ...
that is flat and long but is relatively wide, the material generally is stored in successive single layers. In cases where the material is more uniform in cross-section (for example, a cable), the material may be safely wound around a reel that is wider than its width. In this case, several windings are needed to create a layer on the reel.


Uses

Examples of reel usage include: * Hose reels that store and prevent kinking of fire hoses or garden hoses *
Bobbin A bobbin or spool is a spindle or cylinder, with or without flanges, on which yarn, thread, wire, tape or film is wound. Bobbins are typically found in industrial textile machinery, as well as in sewing machines, fishing reels, tape measure ...
s that hold yarns or
thread Thread may refer to: Objects * Thread (yarn), a kind of thin yarn used for sewing ** Thread (unit of measurement), a cotton yarn measure * Screw thread, a helical ridge on a cylindrical fastener Arts and entertainment * ''Thread'' (film), 2016 ...
s for
sewing machine A sewing machine is a machine used to sew fabric and materials together with thread. Sewing machines were invented during the first Industrial Revolution to decrease the amount of manual sewing work performed in clothing companies. Since the inv ...
s and
weaver Weaver or Weavers may refer to: Activities * A person who engages in weaving fabric Animals * Various birds of the family Ploceidae * Crevice weaver spider family * Orb-weaver spider family * Weever (or weever-fish) Arts and entertainment ...
s * Retractable tape measures * Fishing reels that store and pull in fishing lines when angling * Film reels that carry
film stock Film stock is an analog medium that is used for recording motion pictures or animation. It is recorded on by a movie camera, developed, edited, and projected onto a screen using a movie projector. It is a strip or sheet of transparent p ...
s * Many audio recordings of the late 20th century (and some today) use reel-to-reel magnetic tape * Kite lines are frequently operated from reels * Specialized reels for holding tow line for hang glider, glider, and sailplane launching * Laying of
communications cable In electrical engineering, a transmission line is a specialized cable or other structure designed to conduct electromagnetic waves in a contained manner. The term applies when the conductors are long enough that the wave nature of the transmi ...
s use giant reels * Winches that wind cables/chains for
sail A sail is a tensile structure—which is made from fabric or other membrane materials—that uses wind power to propel sailing craft, including sailing ships, sailboats, windsurfers, ice boats, and even sail-powered land vehicles. Sails may ...
s or anchors on ships *
Windlass The windlass is an apparatus for moving heavy weights. Typically, a windlass consists of a horizontal cylinder (barrel), which is rotated by the turn of a crank or belt. A winch is affixed to one or both ends, and a cable or rope is wound arou ...
es that are used to wind and pull rope or chains in order to lift weights on implements such as a crane, a well or a
drawbridge A drawbridge or draw-bridge is a type of moveable bridge typically at the entrance to a castle or tower surrounded by a moat. In some forms of English, including American English, the word ''drawbridge'' commonly refers to all types of moveable ...
* Webbing barriers that allow mobile post positions collect tensionally excess webbing * Tow trucks hold steel cable on reels * Rope, wire and electrical cable is often supplied on reels * Badge reels are used to hold access badges,
smart card A smart card, chip card, or integrated circuit card (ICC or IC card) is a physical electronic authentication device, used to control access to a resource. It is typically a plastic credit card-sized card with an embedded integrated circuit (IC) c ...
s and other externally tethered small items such as
key Key or The Key may refer to: Common meanings * Key (cryptography), a piece of information that controls the operation of a cryptography algorithm * Key (lock), device used to control access to places or facilities restricted by a lock * Key (map ...
s and
clipper A clipper was a type of mid-19th-century merchant sailing vessel, designed for speed. Clippers were generally narrow for their length, small by later 19th century standards, could carry limited bulk freight, and had a large total sail area. "C ...
s * A
cave diving Cave-diving is underwater diving in water-filled caves. It may be done as an extreme sport, a way of exploring flooded caves for scientific investigation, or for the search for and recovery of divers or, as in the 2018 Thai cave rescue, other ...
reel is a safety equipment used for running a distance line


Motion picture terminology

It is traditional to discuss the length of theatrical
motion picture A film also called a movie, motion picture, moving picture, picture, photoplay or (slang) flick is a work of visual art that simulates experiences and otherwise communicates ideas, stories, perceptions, feelings, beauty, or atmosphere ...
s in terms of "reels". The standard length of a 35 mm film reel is , which runs approximately 11 minutes for sound film (24 frames per second) and about 15 minutes for silent film at the more or less standard speed of 18 frames per second. Most films have visible cues which mark the end of the reel. This allows projectionists running reel-to-reel to change over to the next reel on the other projector. A so-called "two-reeler" would have run about 15–24 minutes since the actual short film shipped to a movie theater for exhibition may have had slightly less (but rarely more) than on it. Most modern projectionists use the term "reel" when referring to a "two-reeler", as modern films are rarely shipped by single reels. A standard Hollywood movie averages about five 2,000-foot reels in length. The "reel" was established as a standard measurement because of considerations in printing motion picture film at a film laboratory, for shipping (especially the film case sizes) and for the size of the physical film magazine attached to the motion picture projector. If it had not been standardized (at of 35 mm film), there would have been many difficulties in the manufacture of the related equipment. A 16 mm "reel" is . It runs, at sound speed, approximately the same amount of time (11–12 minutes) as a 35 mm reel. A "split reel" is a motion picture film reel in two halves that, when assembled, hold a specific length of motion picture film that has been wound on a plastic core. Using a split reel allows film to be shipped or handled in a lighter and smaller form than film would on a "fixed" reel. In silent film terminology, two films on one reel. As digital cinema catches on, the physical reel is being replaced by a virtual format called Digital Cinema Package, which can be distributed using any storage medium (such as hard drives) or data transfer medium (such as the internet or satellite links) and projected using a digital projector instead of a conventional movie projector. A newsreel is a short documentary film. A showreel or demo reel is a short film showcasing a person's or organization's previous work.


See also

*
Spindle (tool) In machine tools, a spindle is a rotating axis of the machine, which often has a shaft at its heart. The shaft itself is called a spindle, but also, in shop-floor practice, the word often is used metonymically to refer to the entire rotary uni ...


References


External links

* {{Commons category inline, Reels Bulk material handling Film and video terminology Packaging Portable tools