HOME

TheInfoList



OR:

The Honda VFR750R, model code 'RC30', is a fully faired, solo-seat-only racing motorcycle created for
homologation Homologation (Greek ''homologeo'', ὁμολογέω, "to agree") is the granting of approval by an official authority. This may be a court of law, a government department, or an academic or professional body, any of which would normally work fr ...
purposes for the World Superbike Championship by Honda Racing Corporation (HRC). It was first released to the Japanese market in 1987, released in Europe in 1988 then the United States in 1990. There were only 3,000 made and they sold for - a very large amount for a production bike at the time.


Engine

The 748 cc
16-valve In automotive engineering a multi-valve or multivalve engine is one where each cylinder has more than two valves. A multi-valve engine has better breathing and may be able to operate at higher revolutions per minute (RPM) than a two-valve engine, ...
gear driven double overhead camshaft
liquid-cooled Liquid cooling refers to cooling by means of the convection or circulation of a liquid. Examples of liquid cooling technologies include: * Cooling by convection or circulation of coolant, including water cooling * Liquid cooling and ventilatio ...
RC24-derived 90° V4 produced at 9,500 rpm for the restricted Japanese model and @ 11,000 rpm elsewhere. It contained race-inspired components. These included such items as
titanium Titanium is a chemical element with the symbol Ti and atomic number 22. Found in nature only as an oxide, it can be reduced to produce a lustrous transition metal with a silver color, low density, and high strength, resistant to corrosion in ...
connecting rod A connecting rod, also called a 'con rod', is the part of a piston engine which connects the piston to the crankshaft. Together with the crank, the connecting rod converts the reciprocating motion of the piston into the rotation of the cranksh ...
s that reduced reciprocating weight ( lighter and eight times the cost) and gear driven camshafts. The engine firing configuration was very different from the road-going VFR750F from which it was derived with a 360° 'big bang' crank arrangement instead of the smoother 180°. This feature produced a very broad spread of power and was coupled to the close ratio gearbox which had an extremely high first gear ratio (0 - 82 mph). Slowing down was made easier with a slipper clutch, and impressive braking capability for the era. While being inspired by the Honda RVF endurance racer (not to be confused with the
Honda RVF750 RC45 The Honda RVF750R RC45 was a fully faired racing motorcycle created for homologation purposes for the Superbike World Championship by Honda Racing Corporation. The RVF750R was the successor to the VFR750R RC30 (not to be confused with the sport t ...
) the VFR750R instead had its engine based on the 1986-7 VFR750F (RC24). The engines are almost identical externally, the only visible differences being in the cylinder heads and the engine side covers. Inside the engine no major parts were identical to the RC24. The
clutch A clutch is a mechanical device that engages and disengages power transmission, especially from a drive shaft to a driven shaft. In the simplest application, clutches connect and disconnect two rotating shafts (drive shafts or line shafts). ...
, gearbox,
crankshaft A crankshaft is a mechanical component used in a piston engine to convert the reciprocating motion into rotational motion. The crankshaft is a rotating shaft containing one or more crankpins, that are driven by the pistons via the connecting ...
, oil pump, connecting rods, water pump, pistons, starter clutch, and the entire valvetrain and cylinder heads are specific to the RC30. There were race kits available from HRC Honda. It
redline Redline refers to the maximum engine speed at which an internal combustion engine or traction motor and its components are designed to operate without causing damage to the components themselves or other parts of the engine. The redline of an en ...
d at 12,500 rpm (in comparison to the VFR750F which redlines at 11,000 rpm) and had a tested 1/4 mile time of 11.8 seconds.


Suspension and brakes

The RC30 front suspension was made by Showa and had wheel and brake pads that had quick-release mountings. The rear wheel carried a brake disc to the inside and a chain sprocket to the outside of a single-sided
swingarm A swingarm, or "swinging arm" (UK), originally known as a swing fork or pivoted fork, is a single or double sided mechanical device which attaches the rear wheel of a motorcycle to its body, allowing it to pivot vertically. The main component of ...
(originally patented by ELF of France), and attached with a single castellated nut and cotter pin. It was also equipped with fully adjustable Showa suspension which, as it only had a single seat thus focusing suspension performance, gave superior ride and handling characteristics. The engine and low storage position of the fuel in the fuel tank combined to give a low centre of gravity which aided its handling prowess. Further statements of its hand-built quality were shown in a full stainless steel 4-2-1 exhaust system, alloy fuel tank and hand laid fibreglass bodywork. The bike was fitted with a 'Pro Squat Rear Brake Linkage' that linked the rear caliper to the frame via a rose-jointed linkage through the swingarm (reducing rear wheel hop under braking).


Motorsport

Fred Merkel won the inaugural Superbike World Championship riders and manufacturers titles in 1988, and repeated this feat in
1989 File:1989 Events Collage.png, From left, clockwise: The Cypress Street Viaduct, Cypress structure collapses as a result of the 1989 Loma Prieta earthquake, killing motorists below; The proposal document for the World Wide Web is submitted; The Exxo ...
. Robert Dunlop won the 1989 Macau Grand Prix, and Steve Hislop did the same in 1990.
Helmut Dähne Helmut Dähne (also rendered as ''Daehne'' or ''Dahne'', born 29 November 1944 in Altenmark, Germany) is a German former motorcycle racer, active not in Grand Prix races, for which the rather tall Dähne (190 cm) is not well suited, but in ...
set the fastest Nordschleife lap time on a motorcycle (7:49:710) in 1993. He used an RC30 with Metzeler ME Z1 tyres.


Relatives

The VFR400R (NC30) closely resembles the VFR750R (RC30). The RC30 was superseded some four years after the last one was built by the
Honda RVF750 RC45 The Honda RVF750R RC45 was a fully faired racing motorcycle created for homologation purposes for the Superbike World Championship by Honda Racing Corporation. The RVF750R was the successor to the VFR750R RC30 (not to be confused with the sport t ...
in 1994.


References


External links


Official Honda Website VFR750R (RC30)
apanese {{DEFAULTSORT:Honda VFR750R VFR750R Sport bikes Motorcycles introduced in 1987