QF 4.7-inch Mk XI Naval Gun
   HOME

TheInfoList



OR:

The 4.7 inch QF Mark XIMark XI = Mark 11. Britain used
Roman numerals Roman numerals are a numeral system that originated in ancient Rome and remained the usual way of writing numbers throughout Europe well into the Late Middle Ages. Numbers are written with combinations of letters from the Latin alphabet, eac ...
to denote Marks (i.e. models) of ordnance until after World War II. Hence this article covers the eleventh model of British QF 4.7-inch gun.
was a 50-calibre, naval gun mounted on Royal Navy (RN) and
Allied An alliance is a relationship among people, groups, or states that have joined together for mutual benefit or to achieve some common purpose, whether or not explicit agreement has been worked out among them. Members of an alliance are called ...
destroyer In naval terminology, a destroyer is a fast, manoeuvrable, long-endurance warship intended to escort larger vessels in a fleet, convoy or battle group and defend them against powerful short range attackers. They were originally developed in ...
s during World War II.Campbell, p. 46


Description and history

The QF 4.7-inch Mk XI gun, on the Mk XX twin mounting, was introduced to the RN aboard the
L and M class destroyer The L and M class was a class of sixteen destroyers which served in the British Royal Navy during World War II. The ships of the class were launched between 1939 and 1942. The L class (also known as the ''Laforeys'') were approved under the ...
s, in commission from 1941 onwards. It featured a 62 lb (28.1 kg) shell fired at 2,538 ft/second (774 m/s) to a maximum range of 21,240 yards (19,420 m) at 45 degrees of elevation. The Mk XX mounting was fully enclosed, but the hoists did not revolve with the turret. The gun's firing cycle was six secondsCampbell, p. 47 and the separate shell and cordite hoists for each gun provided shells and cartridges at a rate of 10 per minute. The shells and cartridges were transferred from the hoists to the tilting tray of the fuze-setting machine by hand. Once the fuzes were set, they slid forward to the loading tray from which they were rammed forward into the breech by a hydraulic rammer. The horizontal sliding-block breech opened semi-automatically after the guns fired. The guns could be loaded at any angle of elevation. The Mk XX mounting could elevate to a maximum of 50° and depress to −10°. The turret had a maximum powered training rate of 10° per second, but was manually elevated. Including the crew and ammunition, the revolving weight of the mounting was . It was protected by a
gun shield A U.S. Marine manning an M240 machine gun equipped with a gun shield A gun shield is a flat (or sometimes curved) piece of armor designed to be mounted on a crew-served weapon such as a machine gun, automatic grenade launcher, or artillery piece ...
thick, too thin to hold a direct hit, but still appreciable versus small splinters, explosions, small caliber rifles. With a shell 24% heavier, the new gun was far more powerful than the previous 45 calibre long 4.7 inch gun making it a match for a weapon such as the Italian 120/50 mm,italian 120/50 guns
/ref> whilst also improving its anti-aircraft capacity. It could now penetrate of armour at a range of rather than . In the Battle of Pantelleria on 15 June 1942, , ) and engaged a superior Italian task force. ''Marne'' fired 704 shells, ''Matchless'' 746 shells, while ''Ithuriel'' (with four 4.7 /45) managed to fire only 246 shells. ''Marne'' hit the cruiser ''Eugenio di Savoia'' with a shell at around 5.50 a.m. ''Matchless'' failed to hit , but later hit the large destroyer . The new 120/50 mm shell was heavy and powerful and the Italian destroyer was soon lying dead in the water, with a furious fire amidships. That destroyer was saved only by towing her to a near naval base, where the fire was finally extinguished.Cernuschi, p. 10-12 In the words of Tony DiGiulian, the 120/50 Mark XI gun was perhaps the finest destroyer gun made by British during World War II, but it was also heavy and costly, as were the ships equipped with it. Wartime production required a much greater production of ships and guns, so cheaper weapons were installed in many other classes, like the 'O' and 'P' (102 mm) and furthers (with the old 120 mm), until the 113 mm (4.5 in) began to replace them, as the first, powerful dual purpose destroyer gu


Notes


Footnotes


References

* * * * *


External links


QF Mark XI 4.7"/50 (12 cm) on Navweaps.com
{{DEFAULTSORT:QF 04.7 inch Mk 11 Naval anti-aircraft guns World War II anti-aircraft guns Naval guns of the United Kingdom 120 mm artillery World War II naval weapons of the United Kingdom