A process design kit (PDK) is a set of files used within the
semiconductor industry
The semiconductor industry is the aggregate of companies engaged in the design and fabrication of semiconductors and semiconductor devices, such as transistors and integrated circuits. It formed around 1960, once the fabrication of semiconduct ...
to model a fabrication process for the design tools used to design an integrated circuit. The PDK is created by the foundry defining a certain technology variation for their processes. It is then passed to their customers to use in the design process. The customers may enhance the PDK, tailoring it to their specific design styles and markets. The designers use the PDK to design, simulate, draw and verify the design before handing the design back to the foundry to produce chips. The data in the PDK is specific to the foundry's process variation and is chosen early in the design process, influenced by the market requirements for the chip. An accurate PDK will increase the chances of first-pass successful silicon.
Description
Different tools in the design flow have different input formats for the PDK data. The PDK engineers have to decide which tools they will support in the design flows and create the libraries and rule sets which support those flows.
A typical PDK contains:
* A primitive device library
** Symbols
** Device parameters
**
PCells
* Verification decks
**
Design Rule Checking
In electronic design automation, a design rule is a geometric constraint imposed on circuit board, semiconductor device, and integrated circuit (IC) designers to ensure their designs function properly, reliably, and can be produced with acceptabl ...
**
Layout Versus Schematic
The Layout Versus Schematic (LVS) is the class of electronic design automation (EDA) verification software that determines whether a particular integrated circuit layout corresponds to the original schematic or circuit diagram of the design.
Bac ...
**
Antenna and Electrical rule check
** Physical Extraction
* Technology data
** Layers, layer names, layer/purpose pairs
** Colors, fills and display attributes
** Process constraints
** Electrical rules
* Rule files
**
LEF
** Tool dependent rule formats
* Simulation models of primitive devices (SPICE or SPICE derivatives)
** Transistors (typically
SPICE)
** Capacitors
** Resistors
** Inductors
* Design Rule Manual
** A user friendly representation of the process requirements
A PDK may also include standard cell libraries from the foundry, a library vendor or developed internally
*
LEF format of abstracted layout data
* Symbols
* Library (.lib) files
*
GDSII
GDSII stream format (GDSII), is a binary database file format which is the de facto industry standard for Electronic Design Automation data exchange of integrated circuit or IC layout artwork. It is a binary file format representing planar geome ...
layout data
References
Further reading
* Yu Cao, "Predictive process design kits", ch. 8 in, ''Predictive Technology Model for Robust Nanoelectronic Design'', Springer Science & Business Media, 2011 .
* Lukas Chrostowski, Michael Hochberg, "Process design kit (PDK)", section 10.1 in, ''Silicon Photonics Design'', Cambridge University Press, 2015 .
* Michael Liehr ''et al.'', "Silicon photonics integrated circuit process design kit", section 4.8 in, Alan Willner (ed), ''Optical Fiber Telecommunications'', vol. 11, Elsevier, 2019 .
* Ian Robertson, Nutapong Somjit, Mitchai Chongcheawchamnan, "Process design kits for RFIC and MMIC design", section 17.8.1 in, ''Microwave and Millimetre-Wave Design for Wireless Communications'', John Wiley & Sons, 2016 .
Semiconductor device fabrication
{{electronics-stub