Medical uses
Crutches are used to keep an eyelid from drooping due to ptosis. Individuals with ptosis who are not candidates for reparable surgery or are looking for an alternative treatment, may consider ptosis crutches. A ptosis crutch is bar that is placed along the inside of an eyewire frame that supports the drooping eyelid. The crutch is positioned where the orbital fold would typically be without ptosis. The crutch should create a fold above the eye, tucking the lid in and raising it above the pupil. The ptosis crutch is designed around the shape and contour of the eye. It is typically made out of metal wire. To create the crutch, measurements must be first taken to determine the depth of the ptosis eye crutch. AnTypes of ptosis crutches
There are two main types of ptosis crutches: Adjustable Eye Crutches: This type of crutch is typically attached to the frame on the nasal side. They are easily adjusted and do not alter the frame as much as other crutches. They have their disadvantages, however: They must be constantly adjusted. This can weaken the metal at the adjustment point, and lead to broken crutches. This crutch is not commonly used and not recommended for moderate to severe cases of the ptosis condition. Reinforced Eye-Crutches: These crutches are attached to the ends of the crutch, and are not as adjustable. Due to the double attachment, this crutch is resistant to breaking. This crutch also comes with a clear plastic coating finish, which helps with comfort, as well as those with allergy sensitivities. The reinforced eye crutch is the most viable solution for individuals with ptosis looking for non-surgical options.Materials used
Crutches are limited to what type of frames they can be placed on. Both metal and plastic frames can be used, but may have limitations. A skilled craftsman can successfully install ptosis eye crutches to almost any frame. The upper eyewire must be close to the orbit of the eyelid. Frames with large or small B measurements may be difficult to work with for ptosis crutches. Plastic Frames: Plastic frames must be thick enough for crutches to be attached or embedded into the frame. Too-thin plastic frames will not work for ptosis crutches. Metal Frames: Metal frames have the highest success rate for eye crutches to be installed. To attach the crutch, it must be soldered onto the eyewire. The metal must be durable. As with anything there may be limitations, but consulting with a skilled specialist can usually confirm all available options. Metal frames are recommended for ptosis crutches, as they are less likely to break during adjustments.Pros
Ptosis eye crutches help support an individual's eyelids so they are able to see.Cons
Ptosis crutches can be uncomfortable if they are not properly fitted. It is always helpful if an optician can take proper measurements to ensure a comfortable fit. The crutch should not fit too tightly, as this can lead to discomfort and an irritable experience. Using an eye crutch usually results in patients being unable toReferences
{{Reflist Medical devices Ophthalmic equipment