History
Potassium picrate was first prepared as impure in mid-17th century byDescription
Potassium picrate is not a very powerful explosive. It is somewhat shock-sensitive. In contact with flame itSynthesis
As with other picrates, potassium picrate may be produced by the neutralization of picric acid with the corresponding carbonate. As picric acid is barely soluble in water the reaction must be done in an appropriate solvent like methanol. First dissolving the picric acid in methanol and then adding potassium carbonate will result in potassium picrate. Temperature control is important to prevent detonation or excessive methanol evaporation.Sensitivity
According to Urbanski, Potassium picrate detonated 10% of the time when struck by a mass of 2kg dropped from the height of 21cm. By comparison, the more sensitive anhydrous lead picrate detonated 10% of the time when struck by the same mass dropped from the height of 2cm.See also
*References
# # Urbanski, Tadeusz (1964), Chemistry and Technology of Explosives, Volume 1, New York: Pergamon Press. Picrates Potassium compounds Explosive chemicals