![19-inch rackmount Ethernet switches and patch panels](https://upload.wikimedia.org/wikipedia/commons/b/bc/19-inch_rackmount_Ethernet_switches_and_patch_panels.jpg)
A patch panel is a device or unit featuring a number of
jacks, usually of the same or similar type, for the use of connecting and routing
circuits for monitoring, interconnecting, and testing circuits in a convenient, flexible manner. Patch panels are commonly used in
computer networking
A computer network is a set of computers sharing resources located on or provided by network nodes. The computers use common communication protocols over digital interconnections to communicate with each other. These interconnections are ma ...
,
recording studios
A recording studio is a specialized facility for sound recording, mixing, and audio production of instrumental or vocal musical performances, spoken words, and other sounds. They range in size from a small in-home project studio large enoug ...
, and
radio
Radio is the technology of signaling and communicating using radio waves. Radio waves are electromagnetic waves of frequency between 30 hertz (Hz) and 300 gigahertz (GHz). They are generated by an electronic device called a transmit ...
and
television
Television, sometimes shortened to TV, is a telecommunication medium for transmitting moving images and sound. The term can refer to a television set, or the medium of television transmission. Television is a mass medium for advertisin ...
.
The term ''patch'' came from early use in
telephony
Telephony ( ) is the field of technology involving the development, application, and deployment of telecommunication services for the purpose of electronic transmission of voice, fax, or data, between distant parties. The history of telephony is i ...
and
radio studio
A recording studio is a specialized facility for sound recording, mixing, and audio production of instrumental or vocal musical performances, spoken words, and other sounds. They range in size from a small in-home project studio large enoug ...
s, where extra equipment kept on standby could be temporarily substituted for failed devices. This reconnection was done via
patch cord
A patch cable, patch cord or patch lead is an electrical or optical cable used to connect ("patch in") one electronic or optical device to another for signal routing. Devices of different types (e.g., a switch connected to a computer, or a sw ...
s and patch panels, like the jack fields of cord-type
telephone switchboard
A telephone switchboard was a device used to connect circuits of telephones to establish telephone calls between users or other switchboards, throughout the 20th century. The switchboard was an essential component of a manual telephone exchange, ...
s.
Terminology
They are also referred to as a patch bay, patch field, jack panel or jack field.
Uses and connectors
In
recording studio
A recording studio is a specialized facility for sound recording, mixing, and audio production of instrumental or vocal musical performances, spoken words, and other sounds. They range in size from a small in-home project studio large enoug ...
s, television and radio broadcast studios, and concert sound reinforcement systems, patchbays are widely used to facilitate the connection of different devices, such as microphones, electric or electronic instruments,
effects
Effect may refer to:
* A result or change of something
** List of effects
** Cause and effect, an idiom describing causality
Pharmacy and pharmacology
* Drug effect, a change resulting from the administration of a drug
** Therapeutic effect, a ...
(e.g. compression, reverb, etc.), recording gear,
amplifier
An amplifier, electronic amplifier or (informally) amp is an electronic device that can increase the magnitude of a signal (a time-varying voltage or current). It may increase the power significantly, or its main effect may be to boost the v ...
s, or broadcasting equipment. Patchbays make it easier to connect different devices in different orders for different projects, because all of the changes can be made at the patchbay. Additionally, patchbays make it easier to troubleshoot problems such as
ground loops; even small home studios and amateur project studios often use patchbays, because it groups all of the input jacks into one location. This means that devices mounted in racks or keyboard instruments can be connected without having to hunt around behind the rack or instrument with a flashlight for the right jack. Using a patchbay also saves wear and tear on the input jacks of studio gear and instruments, because all of the connections are made with the patchbay.
Patch panels are being used more prevalently in domestic installations, owing to the popularity of "Structured Wiring" installs.
They are also found in home cinema installations more and more.
Normalization
![Trompeter JSI-52 Patch Panel](https://upload.wikimedia.org/wikipedia/commons/3/35/Trompeter_JSI-52_Patch_Panel.jpeg)
It is conventional to have the top row of jacks wired at the rear to outputs and bottom row of jacks wired to inputs. Patch bays may be half-normal (usually bottom) or full-normal, "normal" indicating that the top and bottom jacks are connected internally. When a patch bay has bottom half-normal wiring, then with no patch cord inserted into either jack, the top jack is internally linked to the bottom jack via break contacts on the bottom jack; inserting a patch cord into the top jack will take a feed off that jack while retaining the internal link between the two jacks; inserting a patch cord into the bottom jack will break the internal link and replace the signal feed from the top jack with the signal carried on the patch cord. With top half-normal wiring, the same happens but vice versa. If a patch bay is wired to full-normal, then it includes break contacts in both rows of jacks.
Switches
Dedicated switching equipment can be an alternative to patch bays in some applications. Switches can make routing as easy as pushing a button, and can provide other benefits over patch bays, including routing a signal to any number of destinations simultaneously. However, switching equipment that can emulate the capabilities of a given patch bay is much more expensive. For example, an S-Video matrix routing switcher with the same capability (8×8) as a 16-point
S-Video
S-Video (also known as separate video, Y/C, and erroneously Super-Video ) is an analog video signal format that carries standard-definition video, typically at 525 lines or 625 lines. It encodes video luma and chrominance on two separate channe ...
patch panel (8 patch cables connects 8 inputs and 8 outputs) may cost ten times more, though it would probably have more capabilities.
Like patch panels, switching equipment for nearly any type of signal is available, including analog and digital video and audio, as well as
RF (cable TV),
MIDI
MIDI (; Musical Instrument Digital Interface) is a technical standard that describes a communications protocol, digital interface, and electrical connectors that connect a wide variety of electronic musical instruments, computers, and re ...
, telephone, networking and electrical. There are various types of switches for audio and video, from simple selector switches to sophisticated
production switcher
A vision mixer is a device used to select between several different live video sources and, in some cases, compositing live video sources together to create visual effects.
In most of the world, both the equipment and its operator are called ...
s. However, emulating or exceeding the capabilities of audio or video patch panels requires specialized devices like
crossbar switch
In electronics and telecommunications, a crossbar switch (cross-point switch, matrix switch) is a collection of switches arranged in a matrix configuration. A crossbar switch has multiple input and output lines that form a crossed pattern of int ...
es.
Switching equipment may be electronic, mechanical, or
electro-mechanical
In engineering, electromechanics combines processes and procedures drawn from electrical engineering and mechanical engineering. Electromechanics focuses on the interaction of electrical and mechanical systems as a whole and how the two systems ...
. Some switcher hardware can be controlled via computer or other external devices. Some have automated or pre-programmed operational capabilities. There are also software switcher applications used to route signals and control data within a "pure digital" computer environment.
See also
*
Cable management
Cable management refers to management of electrical or optical cable in a cabinet or an installation. The term is used for products, workmanship or planning.
Cables can easily become tangled, making them difficult to work with, sometimes res ...
*
Distribution frame Distribution may refer to:
Mathematics
*Distribution (mathematics), generalized functions used to formulate solutions of partial differential equations
*Probability distribution, the probability of a particular value or value range of a varia ...
*
Wiring closet
A wiring cupboard is a small room commonly found in institutional buildings, such as schools and offices, where electrical connections are made. While they are used for many purposes, their most common use is for computer networking where it may ...
References
*
External links
{{Commonscat-inline, Patch panels
Telephony equipment
Audio engineering
Broadcast engineering
Electrical signal connectors
Networking hardware