The Panoz Roadster is a
sports car
A sports car is a car designed with an emphasis on dynamic performance, such as handling, acceleration, top speed, the thrill of driving and racing capability. Sports cars originated in Europe in the early 1900s and are currently produced by ...
launched in 1992 by the American manufacturer
Panoz Auto Development Company of
Georgia
Georgia most commonly refers to:
* Georgia (country), a country in the Caucasus region of Eurasia
* Georgia (U.S. state), a state in the Southeast United States
Georgia may also refer to:
Places
Historical states and entities
* Related to the ...
. The Roadster was succeeded by the AIV Roadster in 1997. They were built using
aluminum
Aluminium (aluminum in American and Canadian English) is a chemical element with the symbol Al and atomic number 13. Aluminium has a density lower than those of other common metals, at approximately one third that of steel. It has ...
, similar to that of the
Plymouth Prowler
The Plymouth Prowler, later the Chrysler Prowler, is a retro-styled production sports car manufactured and marketed from 1997 to 2002 by DaimlerChrysler, based on the 1993 concept car of the same name.
The Prowler was offered in a single g ...
first sold several years later in 1997. The Panoz Roadster was the first American-built aluminum intensive vehicle.
Development
Panoz had purchased the rights to a frame designed by
Frank Costin
Francis Albert Costin (8 June 1920 – 5 February 1995) was a British automotive engineer who advanced monocoque chassis design and was instrumental in adapting aircraft aerodynamic knowledge for automobile use.
Career
Costin was an engineer ...
[ used in a defunct Irish sportscar called the ]TMC Costin
The TMC Costin is a Clubman-style sports car built from 1983 to 1987 in Castlebridge, County Wexford, Republic of Ireland. Fewer than forty were produced.
History
The Thompsons of County Wexford, Ireland were a farming family with six sons. On ...
. Panoz had Freeman Thomas
Freeman Thomas (born August 20, 1957) is an American automobile and industrial designer who has worked for Porsche, Volkswagen Group, DaimlerChrysler and Ford.
Background
Thomas, the son of an American military air traffic controller and a German ...
design a new body for the car.[ Aluminum body panels were produced b]
Superform USA
resulting in bodywork both light and strong. Ford Mustang
The Ford Mustang is a series of American automobiles manufactured by Ford. In continuous production since 1964, the Mustang is currently the longest-produced Ford car nameplate. Currently in its sixth generation, it is the fifth-best selli ...
running gear, engine, and transmission were used, as was a solid rear axle and independent front suspension
Independent suspension is any automobile suspension system that allows each wheel on the same axle to move vertically (i.e. reacting to a bump on the road) independently of the others. This is contrasted with a beam axle or deDion axle system in w ...
. A seven-man crew built the first ten cars, and other workers were added later to the production team. The Costin chassis was never put under a production car, instead the early Roadsters featured a TIG welded stainless steel
Stainless steel is an alloy of iron that is resistant to rusting and corrosion. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel's corros ...
tubing frame, and extensive use of CNC machined and stamped parts.
Roadster
The Roadster had no top or tonneau
A tonneau ( or ) is an area of a car or truck open at the top. It can be for passengers or cargo.
A tonneau cover in current automotive terminology is a hard or soft cover that spans the back of a pickup truck to protect the load or to improve ...
cover, and no provision or intention of having either. No automatic transmission was offered, only the 5-speed manual. A small heater core delivered warmth to the windshield for defrosting, since the US DOT requirements mandated it. There was no radio, no heater, no air conditioner, and furthermore no place to install any of those.
Some Roadsters were fitted with a custom engraved plate atop the intake manifold
In automotive engineering, an inlet manifold or intake manifold (in American English) is the part of an engine that supplies the fuel/air mixture to the cylinders. The word ''manifold'' comes from the Old English word ''manigfeald'' (from the ...
with the owner’s name and the Panoz logo. A few cars were built to a factory specification, but most were custom ordered by the individual buyers.
There were a number of changes that took place over the course of production, but in general the cars were quite similar. Roadster production continued to 1995. Two prototypes were built, and a further 44 cars were manufactured and sold to the public.
AIV Roadster
Starting in 1994 Panoz developed an aluminum chassis for the Roadster. This new chassis would both reduce assembly time (yet 350 man hours were still put into each copy), and reduce weight improving performance. In 1996 a new prototype was unveiled, which differed substantially from the original car. It had an extruded aluminum space frame
In architecture and structural engineering, a space frame or space structure ( 3D truss) is a rigid, lightweight, truss-like structure constructed from interlocking struts in a geometric pattern. Space frames can be used to span large areas with ...
with a central backbone. Special adhesives were used to attach the frame and body. Equally important, an entirely new drive train
A drivetrain (also frequently spelled as drive train or sometimes drive-train) is the group of components that deliver mechanical power from the prime mover to the driven components. In automotive engineering, the drivetrain is the components o ...
was used, the 1996 Mustang SVT Cobra all aluminum, V-8 DOHC 32 valve motor. Consequently, the new Roadster was at approximately 70% aluminum and was dubbed an Aluminum Intensive Vehicle, the AIV Roadster.
The new engine produced and of torque. Combined with the lighter chassis this increased the car's power-to-weight ratio significantly. With the weight savings, an air conditioner was installed with little overall weight or performance change.
The last year the AIV Roadster was made was 1999, when 10 were modified with special paint, supercharged
In an internal combustion engine, a supercharger compresses the intake gas, forcing more air into the engine in order to produce more power for a given displacement.
The current categorisation is that a supercharger is a form of forced induct ...
, and signed to create the Signature Edition 2000 Panoz AIV Roadster.[ Total production of the AIV consisted of 6 prototypes and a further 176 production models sold to the public.][ Some cars built in 1999 were not sold until 2000.
]
Video games
The Panoz Roadster has been featured in the ''Midtown Madness
''Midtown Madness'' (also known as ''Midtown Madness: Chicago Edition'') is a 1999 racing game developed by Angel Studios and published by Microsoft for Microsoft Windows. The demo version was released in April 1999. Two sequels followed, with ...
'' racing game series.
The car also more recently features in ''rFactor 2
''rFactor 2'' is a personal computer, computer racing simulator developed by Image Space Incorporated (renamed Studio 397 in 2016, acquired by Motorsport Games in 2021) and released for Microsoft Windows, Windows in 2012. Like its predecessor ''r ...
''.
Specifications of AIV Roadster
References
External links
Official site
Panoz Roadster owner's registry
{{Panoz
Roadster
Cars introduced in 1992
Cars introduced in 1996
Roadsters
Retro-style automobiles