Applications
PDF417 is used in many applications by both commercial and government organizations. PDF417 is one of the formats (along withFeatures
In addition to features typical of two dimensional bar codes, PDF417's capabilities include: * Linking. PDF417 symbols can link to other symbols which are scanned in sequence allowing even more data to be stored. * User-specified dimensions. The user can decide how wide the narrowest vertical bar (X dimension) is, and how tall the rows are (Y dimension). * Public domain format. Anyone can implement systems using this format without anyFormat
The PDF417 bar code (also called a symbol) consists of 3 to 90 rows, each of which is like a small linear bar code. Each row has: * a quiet zone. This is a mandated minimum amount of white space before the bar code begins. * a start pattern which identifies the format as PDF417. * a "row left" codeword containing information about the row (such as the row number and error correction level) * 1–30 data codewords: Codewords are a group of bars and spaces representing one or more numbers, letters, or other symbols. * a "row right" codeword with more information about the row. * a stop pattern. * another quiet zone. All rows are the same width; each row has the same number of codewords.Codewords
PDF417 uses a base 929 encoding. Each codeword represents a number from 0 to 928. The codewords are represented by patterns of dark (bar) and light (space) regions. Each of these patterns contains four bars and four spaces (where the 4 in the name comes from). The total width is 17 times the width of the narrowest allowed vertical bar (the X dimension); this is where the 17 in the name comes from. Each pattern starts with a bar and ends with a space. The row height must be at least 3 times the minimum width: Y ≥ 3 X. There are three distinct bar–space patterns used to represent each codeword. These patterns are organized into three groups known as clusters. The clusters are labeled 0, 3, and 6. No bar–space pattern is used in more than one cluster. The rows of the symbol cycle through the three clusters, so row 1 uses patterns from cluster 0, row 2 uses cluster 3, row 3 uses cluster 6, and row 4 again uses cluster 0. Which cluster can be determined by an equation: : Where ''K'' is the cluster number and the ''bi'' refer to the width of the ''i''-th black bar in the symbol character (in ''X'' units). Alternatively, : Where ''Ei'' is the ''i''-th edge-to-next-same-edge distance. Odd indices are the leading edge of a bar to the leading edge of the next bar; even indices are for the trailing edges. One purpose of the three clusters is to determine which row (mod 3) the codeword is in. The clusters allow portions of the symbol to be read using a single scan line that may be skewed from the horizontal. For instance, the scan might start on row 6 at the start of the row but end on row 10. At the beginning of the scan, the scanner sees the constant start pattern, and then it sees symbols in cluster 6. When the skewed scan straddles rows 6 and 7, then the scanner sees noise. When the scan is on row 7, the scanner sees symbols in cluster 0. Consequently, the scanner knows the direction of the skew. By the time the scanner reaches the right, it is on row 10, so it sees cluster 0 patterns. The scanner will also see a constant stop pattern.Encoding
Of the 929 available code words, 900 are used for data, and 29 for special functions, such as shifting between major modes. The three major modes encode different types of data in different ways, and can be mixed as necessary within a single bar code: *Byte: each group of 5 code words represents 6 bytes. (Because 9005 > 2566.) Additional bytes are encoded one per code word. *Numeric: ''n'' digits are encoded in +1 code words, up to a maximum of 44 digits in 15 code words. *Text: Each code word represents two base-30 digits, which are used by a system of four submodes to represent the printable ASCII characters (plus CR, LF and HT): ** Uppercase: A–Z, SP, Change to lowercase, Change to mixed, Interpret next digit as punctuation ** Lowercase: a–z, SP, Interpret next digit as uppercase, Change to mixed, Interpret next digit as punctuation ** Mixed: 0–9, &, CR, HT, comma, :, #, -, period, $, /, +, %, *, =, ^, Change to punctuation, SP, Change to lowercase, Change to uppercase, Interpret next digit as punctuation ** Punctuation: ;, <, >, @, \, _, `, ~, !, CR, HT, comma, :, LF, -, period, $, /, ", , , *, (, ), ?, , ', Change to uppercaseError correction
When the PDF417 symbol is created, from 2 to 512 error detection and correction codewords are added. PDF417 usesComparison with other symbologies
PDF417 is a stacked barcode that can be read with a simple linear scan being swept over the symbol. Those linear scans need the left and right columns with the start and stop code words. Additionally, the scan needs to know what row it is scanning, so each row of the symbol must also encode its row number. Furthermore, the reader's line scan won't scan just a row; it will typically start scanning one row, but then cross over to a neighbor and possibly continuing on to cross successive rows. In order to minimize the effect of these crossings, the PDF417 modules are tall and narrow — the height is typically three times the width. Also, each code word must indicate which row it belongs to so crossovers, when they occur, can be detected. The code words are also designed to be delta-decodable, so some code words are redundant. Each PDF data code word represents about 10 bits of information (log2(900) ≈ 9.8), but the printed code word (character) is 17 modules wide. Including a height of 3 modules, a PDF417 code word takes 51 square modules to represent 10 bits. That area does not count other overhead such as the start, stop, row, format, and ECC information. Other 2D codes, such asReferences
External links