Outer measure

In the mathematical field of measure theory, an outer measure or exterior measure is a function defined on all subsets of a given set with values in the extended real numbers satisfying some additional technical conditions. The theory of outer measures was first introduced by Constantin Carathéodory to provide an abstract basis for the theory of measurable sets and countably additive measures. Carathéodory's work on outer measures found many applications in measure-theoretic set theory (outer measures are for example used in the proof of the fundamental Carathéodory's extension theorem), and was used in an essential way by Hausdorff to define a dimension-like metric invariant now called Hausdorff dimension. Outer measures are commonly used in the field of geometric measure theory.

Measures are generalizations of length, area and volume, but are useful for much more abstract and irregular sets than intervals in $\mathbb$ or balls in $\mathbb^$. One might expect to define a generalized measuring function $\varphi$ on $\mathbb$ that fulfills the following requirements:

# Any interval of reals ,b/math> has measure $b-a$
# The measuring function $\varphi$ is a non-negative extended real-valued function defined for all subsets of $\mathbb$.
# Translation invariance: For any set $A$ and any real $x$, the sets $A$ and $A+x=\$ have the same measure
# Countable additivity: for any sequence $(A_j)$ of pairwise disjoint subsets of $\mathbb$
::$\varphi\left(\bigcup_^\infty A_i\right) = \sum_^\infty \varphi(A_i).$

It turns out that these requirements are incompatible conditions; see non-measurable set. The purpose of constructing an ''outer'' measure on all subsets of $X$ is to pick out a class of subsets (to be called ''measurable'') in such a way as to satisfy the countable additivity property.

Outer measures

Given a set $X,$ let $2^X$ denote the collection of all subsets of $X,$ including the empty set $\varnothing.$ An outer measure on $X$ is a set function
\mu: 2^X \to , \infty/math>
such that
* : $\mu(\varnothing) = 0$
* : for arbitrary subsets $A, B_1, B_2, \ldots$ of $X,$$\text A \subseteq \bigcup_^\infty B_j \text \mu(A) \leq \sum_^\infty \mu(B_j).$
Note that there is no subtlety about infinite summation in this definition. Since the summands are all assumed to be nonnegative, the sequence of partial sums could only diverge by increasing without bound. So the infinite sum appearing in the definition will always be a well-defined element of , \infty If, instead, an outer measure were allowed to take negative values, its definition would have to be modified to take into account the possibility of non-convergent infinite sums.

An alternative and equivalent definition.The original definition given above follows the widely cited texts of Federer and of Evans and Gariepy. Note that both of these books use non-standard terminology in defining a "measure" to be what is here called an "outer measure." Some textbooks, such as Halmos (1950), instead define an outer measure on $X$ to be a function \mu: 2^X \to , \infty/math> such that
* : $\mu(\varnothing) = 0$
* : if $A$ and $B$ are subsets of $X$ with $A \subseteq B,$ then $\mu(A) \leq \mu(B)$
* for arbitrary subsets $B_1, B_2, \ldots$ of $X,$$\mu\left(\bigcup_^\infty B_j\right) \leq \sum_^\infty \mu(B_j).$

Measurability of sets relative to an outer measure

Let $X$ be a set with an outer measure $\mu.$ One says that a subset $E$ of $X$ is $\mu$-measurable (sometimes called Carathéodory-measurable relative to $\mu,$ after the mathematician Carathéodory) if and only if
$\mu(A) = \mu(A \cap E) + \mu(A \setminus E)$
for every subset $A$ of $X.$

Informally, this says that a $\mu$-measurable subset is one which may be used as a building block, breaking any other subset apart into pieces (namely, the piece which is inside of the measurable set together with the piece which is outside of the measurable set). In terms of the motivation for measure theory, one would expect that area, for example, should be an outer measure on the plane. One might then expect that every subset of the plane would be deemed "measurable," following the expected principle that
$\operatorname(A \cup B) = \operatorname(A) + \operatorname(B)$
whenever $A$ and $B$ are disjoint subsets of the plane. However, the formal logical development of the theory shows that the situation is more complicated. A formal implication of the axiom of choice is that for any definition of area as an outer measure which includes as a special case the standard formula for the area of a rectangle, there must be subsets of the plane which fail to be measurable. In particular, the above "expected principle" is false, provided that one accepts the axiom of choice.

The measure space associated to an outer measure

It is straightforward to use the above definition of $\mu$-measurability to see that
* if $A \subseteq X$ is $\mu$-measurable then its complement $X \setminus A \subseteq X$ is also $\mu$-measurable.
The following condition is known as the "countable additivity of $\mu$ on measurable subsets."
* if $A_1, A_2, \ldots$ are $\mu$-measurable subsets of $X$ and $A_i \cap A_j$ is empty whenever $i \neq j,$ then one has $\mu\Big(\bigcup_^\infty A_j\Big) = \sum_^\infty\mu(A_j).$

A similar proof shows that:
* if $A_1, A_2, \ldots$ are $\mu$-measurable subsets of $X,$ then the union $A_1 \cup A_2 \cup \cdots$ and intersection $A_1 \cap A_2 \cap \cdots$ are also $\mu$-measurable.

The properties given here can be summarized by the following terminology:

One thus has a measure space structure on $X,$ arising naturally from the specification of an outer measure on $X.$ This measure space has the additional property of completeness, which is contained in the following statement:
* Every subset $A \subseteq X$ such that $\mu(A) = 0$ is $\mu$-measurable.
This is easy to prove by using the second property in the "alternative definition" of outer measure.

Restriction and pushforward of an outer measure

Let be an outer measure on the set .

Pushforward

Given another set and a map , define by
:$\big(f_\sharp\mu\big)(A)=\mu\big(f^(A)\big).$
One can verify directly from the definitions that is an outer measure on .

Restriction

Let be a subset of . Define by
:$\mu_B(A)=\mu(A\cap B).$
One can check directly from the definitions that is another outer measure on .

Measurability of sets relative to a pushforward or restriction

If a subset of is -measurable, then it is also -measurable for any subset of .

Given a map and a subset of , if is -measurable then is -measurable. More generally, is -measurable if and only if is -measurable for every subset of .

Regular outer measures

Definition of a regular outer measure

Given a set , an outer measure on is said to be regular if any subset can be approximated 'from the outside' by -measurable sets. Formally, this is requiring either of the following equivalent conditions:
* for any subset of and any positive number , there exists a -measurable subset of which contains and with .
* for any subset of , there exists a -measurable subset of which contains and such that .
It is automatic that the second condition implies the first; the first implies the second by considering the intersection of a minimizing sequence of subsets.

The regular outer measure associated to an outer measure

Given an outer measure on a set , define by
:$\nu(A)=\inf\Big\.$
Then is a regular outer measure on which assigns the same measure as to all -measurable subsets of . Every -measurable subset is also -measurable, and every -measurable subset of finite -measure is also -measurable.

So the measure space associated to may have a larger σ-algebra than the measure space associated to . The restrictions of and to the smaller σ-algebra are identical. The elements of the larger σ-algebra which are not contained in the smaller σ-algebra have infinite -measure and finite -measure.

From this perspective, may be regarded as an extension of .

Outer measure and topology

Suppose is a metric space and an outer measure on . If has the property that

:$\varphi(E \cup F) = \varphi(E) + \varphi(F)$

whenever

:$d(E,F) = \inf\ > 0,$

then is called a metric outer measure.

Theorem. If is a metric outer measure on , then every Borel subset of is -measurable. (The Borel sets of are the elements of the smallest -algebra generated by the open sets.)

Construction of outer measures

There are several procedures for constructing outer measures on a set. The classic Munroe reference below describes two particularly useful ones which are referred to as Method I and Method II.

Method I

Let be a set, a family of subsets of which contains the empty set and a non-negative extended real valued function on which vanishes on the empty set.

Theorem. Suppose the family and the function are as above and define

:$\varphi(E) = \inf \biggl\.$

That is, the infimum extends over all sequences of elements of which cover , with the convention that the infimum is infinite if no such sequence exists. Then is an outer measure on .

Method II

The second technique is more suitable for constructing outer measures on metric spaces, since it yields metric outer measures. Suppose is a metric space. As above is a family of subsets of which contains the empty set and a non-negative extended real valued function on which vanishes on the empty set. For each , let

:$C_\delta= \$

and

:$\varphi_\delta(E) = \inf \biggl\.$

Obviously, when since the infimum is taken over a smaller class as decreases. Thus

: \lim_ \varphi_\delta(E) = \varphi_0(E) \in , \infty/math>

exists (possibly infinite).

Theorem. is a metric outer measure on .

This is the construction used in the definition of Hausdorff measures for a metric space.

See also

*Inner measure

Notes

References

*
*
*
*
*
*
*

External links

Outer measure
a
Encyclopedia of Mathematics

Caratheodory measure
a
Encyclopedia of Mathematics

{{Measure theory

Measures (measure theory)