The Ordnance QF 3 pounder 2 cwt gun was a 47 mm British tank gun based on the

Ordnance QF 3 pounder Vickers The Ordnance QF 3-pounder Vickers (47 mm / L50) was a British artillery piece first tested in Britain in 1903. It was used on Royal Navy warships. It was more powerful than and unrelated to the older QF 3-pounder Hotchkiss, with a propell ...

naval gun, mounted on

Vickers Vickers was a British engineering company that existed from 1828 until 1999. It was formed in Sheffield as a steel foundry by Edward Vickers and his father-in-law, and soon became famous for casting church bells. The company went public i ...

-built tanks in the 1920s and 1930s. The gun was produced in 31 calibre (59 inch) and 40 calibre (74 inch) versions. The weapon only fired a solid shot, and was stated in the requirements of the A6 series of Vickers Medium tanks to have the ability to penetrate the armour of contemporary hostile tanks at a range of 1000 yards. The Vickers Medium Mark I was equipped with the Ordnance Quick Firing 2cwt Mark I version of the weapon, whilst from the Vickers Medium Mark II the Mark II version of the 3-pounder was utilized. Even though other European countries still fielded similar weapons (e. g., Cannone da 47/32) at the start of the Second World War (and quite a few years into it), due to its comparatively low muzzle velocity the 3-pounder was considered obsolete by the war start by the British, with the

Ordnance QF 2-pounder The Ordnance QF 2-pounder ( QF denoting "quick firing"), or simply "2 pounder gun", was a British anti-tank gun and vehicle-mounted gun employed in the Second World War. It was the main anti-tank weapon of the artillery units in the Battle o ...

replacing it as the standard tank gun of British tanks.

Usage

Vickers Medium Mark I The Vickers Medium Mark I was a British tank of the Inter-war period built by Vickers from 1924. Background After the First World War Britain disbanded most of its tank units leaving only five tank battalions equipped with the Mark V and the Me ...

* Vickers Medium Mark II * Medium Mark III *A6E1 *

Vickers A1E1 Independent The Independent A1E1 is a multi-turreted tank that was designed by the British armaments manufacturer Vickers between the First and Second World Wars. Although it only ever reached the prototype stage and only a single example was built, it i ...

Vickers 6-Ton The Vickers 6-ton tank or Vickers Mark E, also known as the "Six-tonner" was a British light tank designed as a private project at Vickers. It was not adopted by the British Army, but was picked up by many foreign armed forces. It was licens ...

References

* Anthony G Williams
38-47 MM CALIBRE CARTRIDGES
*David Fletcher, British Battle Tanks: World War I to 1939''', Oxford: Osprey Publishing QF 3 pounder World War II tank guns World War II artillery of the United Kingdom Tank guns of the United Kingdom Military equipment introduced in the 1920s {{artillery-stub

Usage

See also

References