Orthodontia

Orthodontics is a dentistry specialty that addresses the diagnosis, prevention, management, and correction of mal-positioned teeth and jaws, and misaligned bite patterns. It may also address the modification of facial growth, known as dentofacial orthopedics.

Abnormal alignment of the teeth and jaws is very common. Nearly 50% of the developed world's population, according to the American Association of Orthodontics, has malocclusions severe enough to benefit from orthodontic treatment: although this figure decreases to less than 10% according to the same AAO statement when referring to medically necessary orthodontics. However, conclusive scientific evidence for the health benefits of orthodontic treatment is lacking, although patients with completed orthodontic treatment have reported a higher quality of life than that of untreated patients undergoing orthodontic treatment. Treatment may require several months to a few years, and entails using dental braces and other appliances to gradually adjust tooth position and jaw alignment. In cases where the malocclusion is severe, jaw surgery may be incorporated in the treatment plan. Treatment usually begins before a person reaches adulthood, insofar as pre-adult bones may be adjusted more easily before adulthood.

History

As a modern science, orthodontics dates to the mid 1800s. The field's influential contributors include Norman William Kingsley (1829–1913) and Edward Angle (1855–1930). Angle created the first basic system for classifying malocclusions, a system which remains in use today.

Until the mid-1970s, braces were made by wrapping metal around each tooth. With advancements in adhesives it became possible to instead bond metal brackets to the teeth.

Methods

A typical treatment for incorrectly positioned teeth ( malocclusion) takes from one to two years, with braces being adjusted every four to 10 weeks by specialists called orthodontists, university-trained dental specialists versed in the prevention, diagnosis and treatment of dental and facial irregularities. Orthodontists offer a wide range of treatment options to straighten crooked teeth, fix irregular bites, and align the jaws correctly. There are many ways to adjust malocclusion. In growing patients there are more options to treat skeletal discrepancies, either by promoting or restricting growth using functional appliances, orthodontic headgear or a reverse pull facemask. Most orthodontic work begins in the early permanent dentition stage before skeletal growth is completed. If skeletal growth has completed, jaw surgery is an option. Sometimes teeth are extracted to aid the orthodontic treatment (teeth are extracted in about half of all the cases, most commonly the premolars).

Orthodontic therapy may include using fixed or removable appliances. Most orthodontic therapy is delivered using appliances that are fixed in place, for example, with braces that are adhesively bonded to the teeth. Fixed appliances may provide greater mechanical control of the teeth; optimal treatment outcome is improved by using fixed appliances.

Fixed appliances may be used, for example, to rotate teeth if that do not fit the arch shape of the other teeth in the mouth, to adjust multiple teeth to different places, to change tooth angle of teeth, or to change the position of a tooth's root. This treatment course is not preferred where a patient has poor oral hygiene, (as decalcification, tooth decay or other complications may result. If a patient is unmotivated (insofar as treatment takes several months and requires commitment to oral hygiene), or if malocclusions are mild.

Biology of tooth movement and how advances in gene therapy and molecular biology technology may shape the future of orthodontic treatment.

Braces

Braces are usually placed on the front side of the teeth, but they may also be placed on the side facing the tongue (called lingual braces). Brackets made out of stainless steel or porcelain are bonded to the center of the teeth using an adhesive. Wires are placed in a slot in the brackets which allows for controlled movement in all three dimensions.

Apart from wires, forces can be applied using elastic bands, and springs may be used to push teeth apart or to close a gap. Several teeth may be tied together with ligatures and different kinds of hooks can be placed to allow for connecting an elastic band.

Clear aligners are an alternative to braces, but insufficient evidence exists to determine their effectiveness.

Treatment Duration

The time required for braces varies from person to person as it depends on the severity of the problem, the amount of room available, the distance the teeth must travel, the health of the teeth, gums, and supporting bone, and how closely the patient follows instructions. On average, however, once the braces are put on, they usually remain in place for one to three years. After braces are removed, most patients will need to wear a retainer all the time for the first six months, then only during sleep for many years.

Headgear

Orthodontic headgear—sometimes referred to as an "extra-oral appliance"—is a treatment approach that requires the patient to have a device strapped onto his or her head to help correct malocclusion—typically used when the teeth do not align properly. Headgear is most often used along with braces or other orthodontic appliances. While braces correct the position of teeth, orthodontic headgear—which as the name suggests is worn on or is strapped onto the patient's head—is most often added to orthodontic treatment to help alter the alignment of the jaw, although there are some situations in which such an appliance can help move teeth, particularly molars.

Whatever the purpose, orthodontic headgear works by exerting tension on the braces via hooks, a facebow, coils, elastic bands, metal orthodontic bands, and other attachable appliances directly into the patient's mouth. It is most effective for children and teenagers because their jaws are still developing and can be easily manipulated. (If an adult is fitted with headgear, it is usually to help correct the position of teeth that have shifted after other teeth have been extracted.) Thus Headgear is typically used to treat a number of jaw alignment or bite problems such as overbite and underbite.

Palatal expansion

Palatal expansion can be best achieved using a fixed tissue born appliance. Removable appliances can push teeth outwards but is less effective at maxillary sutural expansion. The effects of a removable expander may look the same as they push teeth outwards but should not be confused with actually expanding the palate. Proper palate expansion can create more space for teeth as well as improve both oral and nasal airflow. itation needed

Jaw surgery

Jaw surgery may be required to fix severe malocclusions. The bone is broken during surgery and is stabilized with titanium (or bioresorbable) plates and screws to allow for healing to take place. After surgery, regular orthodontic treatment is used to move the teeth into their final position.

During treatment

To reduce pain during the orthodontic treatment, low-level laser therapy (LLLT), vibratory devices, chewing adjuncts, brainwave music, or cognitive behavioral therapy can be used. However, the supporting evidence is of low quality, and the results are inconclusive.

Post treatment

After orthodontic treatment has completed, there is a tendency for teeth to return, or relapse, back to their pre-treatment positions. Over 50% of patients have some reversion to pre-treatment positions within 10 years following treatment. To prevent relapse, the majority of patients will be offered a retainer once treatment has completed and will benefit from wearing their retainers. Retainers can be either fixed or removable.

Removable retainers

Removable retainers are made from a clear plastic, and they are custom-fitted for the patient's mouth. It has a tight fit and holds all of the teeth in position. There are many types of brands for clear retainers including Zendura Retainer, Essix Retainer, and Vivera Retainer. Hawley retainer is also a removable orthodontic appliance made from a combination of plastic and metal that is molded custom to fit the patient's mouth. Removable retainers will be worn for different periods of time depending on patient need to stabilise the dentition.

Fixed retainers

Fixed retainers are a simple wire fixed to the tongue-facing part of the incisors using dental adhesive and can be specifically useful to prevent rotation in incisors. Other types of fixed retainers can include labial or lingual braces, with brackets fixed to the teeth.

File:Hyrax rapid palatal expander.png, Palatal expander
File:Full orthodontic headgear with headcap and fitting straps.jpg, Orthodontic headgear
File:Cephalometric radiograph.JPG, An X-ray taken for skull analysis
File:Retainer.jpg, Top (left) and bottom retainers

Clear Aligners (Invisalign)

Invisalign is another form of orthodontics that is commonly used today. Many patients do not like the appearance of traditional metal braces, so they opt for clear removable aligners. There was a lot of controversy about the effectiveness of Invisalign, but with years of advancements, Invisalign's results can now be closely compared to traditional braces but with a lot more freedom and faster results.

Process

After booking an appointment with a dentist, the patient sets up a consultation. During the consultation the dentist or the dental assistant will scan the individual's teeth with a machine called iTero. The iTero machine digitally scans the structure of the teeth and gums. The dentist is able to see a 3D model of the patient's teeth on the screen. Unlike traditional braces, with Invisalign one is able to see the entire process from start to finish during consultation. Being that aligners are used, there is a lot of flexibility in fixing the smile. The dentist is able to make any changes that one wants to their treatment.

Traditional braces require metal brackets; with Invisalign, depending on the case, a patient will have "attachments" on the teeth. They are clear little buttons that help move teeth. Also, depending on the case, an individual might need interproximal reduction, also known as IPR. The dentist will take a little tool and "shave" off in-between the teeth, to help with overcrowded teeth. The reduction is very minimal, at most 0.3mm.

Once the individual receives their aligners, they will have to wear them every day for 20–22 hours. One is supposed to remove them when eating and drinking. Unlike traditional metal braces, the person is able to eat anything when the aligners are removed; there are no restrictions.

After the treatment is complete, the individual will have to wear clear removable retainers.

Training

There are several specialty areas in dentistry, but the specialty of orthodontics was the first to be recognized within dentistry. Specifically, the American Dental Association recognized orthodontics as a specialty in the 1950s. Each country has their own system for training and registering orthodontic specialists. It is an effective and efficient alternative to fixed appliance procedures with brackets for the effective and efficient treatment of all dentoalveolar malocclusions, as well as a viable orthodontic therapy for preparation prior to Orthognathic Surgery.

Australia

In Australia, to obtain an accredited three-year full-time university degree in orthodontics, one will need to be a qualified dentist (complete an AHPRA registered general dental degree) with a minimum of two years of clinical experience. There are several universities in Australia that offer orthodontic programs: University of Adelaide, University of Melbourne, University of Sydney, University of Queensland, University of Western Australia, University of Otago. Orthodontic Courses are accredited by the Australian Dental Council and reviewed by the Australian Society of Orthodontists (ASO). Prospective applicants should obtain information from the relevant institution before applying for admission. After completing a degree in orthodontics, specialists are required to be registered with the Australian Health Practitioner Regulation Agency (AHPRA) in order to practice.

Bangladesh

Dhaka Dental College in Bangladesh is one of the many schools recognized by the Bangladesh Medical and Dental Council (BM&DC) that offer post-graduation orthodontic courses. Before applying to any post-graduation training courses, an applicant must have completed the Bachelor of Dental Surgery (BDS) examination from any dental college. After application, the applicant must take an admissions test held by the specific college. When successful, selected candidates undergo training for six months.

Canada

In Canada, obtaining a dental degree, such as a Doctor of Dental Surgery (DDS) or Doctor of Medical Dentistry (DMD), would be required before being accepted by a school for orthodontic training. Currently, there are 10 schools in the country offering the orthodontic specialty. Candidates should contact the individual school directly to obtain the most recent pre-requisites before entry. The Canadian Dental Association expects orthodontists to complete at least two years of post-doctoral, specialty training in orthodontics in an accredited program, after graduating from their dental degree.

Pakistan

In Pakistan to be enrolled as a student or resident in a postgraduation orthodontic course approved by Pakistan Medical and Dental Council, the dentist must graduate with a Bachelor of Dental Surgery (BDS) or equivalent degree. Pakistan Medical & Dental Council (PMDC) has a recognized program in Orthodontics as Master in Dental Surgery (MDS) orthodontics and FCPS orthodontics as 4 years post-graduate degree programs, the latter of which is conducted by CPSP Pakistan.

United States

Similar to Canada, there are several colleges and universities in the United States that offer orthodontic programs. Every school has a different enrollment process, but every applicant is required to have graduated with a DDS or DMD from an accredited dental school. Entrance into an accredited orthodontics program is extremely competitive, and begins by passing a national or state licensing exam.

The program generally lasts for two to three years, and by the final year, graduates are to complete the written American Board of Orthodontics (ABO) exam. This exam is also broken down into two components: a written exam and a clinical exam. The written exam is a comprehensive exam that tests for the applicant's knowledge of basic sciences and clinical concepts. The clinical exam, however, consists of a Board Case Oral Examination (BCOE), a Case Report Examination (CRE), and a Case Report Oral Examination (CROE). Once certified, certification must then be renewed every ten years. Orthodontic programs can award the Master of Science degree, Doctor of Science degree, or Doctor of Philosophy degree depending on the school and individual research requirements.
Orthodontics Instruments https://esurgerytool.com/

United Kingdom

Throughout the United Kingdom, there are several Orthodontic Specialty Training Registrar posts available.https://www.bos.org.uk/Portals/0/Public/docs/Careers/guidelines-on-orthodontic-specialty-training.pdf "Orthodontic Specialty Training in the UK" (PDF). British Orthodontic Society. British Orthodontic Society. Retrieved 28 October 2017. The program is full-time for three years, and upon completion, trainees graduate with a degree at the Masters or Doctorate level. Training may take place within hospital departments that are linked to recognized dental schools. Obtaining a Certificate of Completion of Specialty Training (CCST) allows an orthodontic specialist to be registered under the General Dental Council (GDC). An orthodontic specialist can provide care within a primary care setting, but to work at a hospital as an orthodontic consultant, higher-level training is further required as a post-CCST trainee. To work within a university setting, as an academic consultant, completing research toward obtaining a Ph.D. is also required.

See also

* Orthodontic technology
* Orthodontic indices
* List of orthodontic functional appliances
* Molar distalization
* Mouth breathing
* Obligate nasal breathing
Orthodontic Tooth Movement: Gene Therapy and Molecular Biology Aspect

Notes

References

{{Portal bar, Medicine

Dentistry branches