Oleum (

Latin Latin (, or , ) is a classical language belonging to the Italic branch of the Indo-European languages. Latin was originally a dialect spoken in the lower Tiber area (then known as Latium) around present-day Rome, but through the power of the ...

''oleum'', meaning oil), or fuming sulfuric acid, is a term referring to solutions of various compositions of

sulfur trioxide Sulfur trioxide (alternative spelling sulphur trioxide, also known as ''nisso sulfan'') is the chemical compound with the formula SO3. It has been described as "unquestionably the most important economically" sulfur oxide. It is prepared on an ind ...

sulfuric acid Sulfuric acid (American spelling and the preferred IUPAC name) or sulphuric acid ( Commonwealth spelling), known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formu ...

, or sometimes more specifically to

disulfuric acid Disulfuric acid (alternative spelling disulphuric acid) or pyrosulfuric acid (alternative spelling pyrosulphuric acid), also named oleum, is a sulfur oxoacid. It is a major constituent of fuming sulfuric acid, oleum, and this is how most chemists e ...

(also known as pyrosulfuric acid). Oleum is identified by the CAS number 8014-95-7 (EC/List number: 616-954-1
ECHA InfoCard: 100.116.872
. Oleums can be described by the formula ''y''SO₃·H₂O where ''y'' is the total molar mass of sulfur trioxide content. The value of ''y'' can be varied, to include different oleums. They can also be described by the formula H₂SO₄·''x''SO₃ where ''x'' is now defined as the molar free sulfur trioxide content. Oleum is generally assessed according to the free SO₃ content by mass. It can also be expressed as a percentage of sulfuric acid strength; for oleum concentrations, that would be over 100%. For example, 10% oleum can also be expressed as H₂SO₄·''0.13611''SO₃, ''1.13611''SO₃·H₂O or 102.25% sulfuric acid. The conversion between % acid and % oleum is: % acid = 100 + 18/80 × % oleum For ''x'' = 1 and ''y'' = 2 the empirical formula H₂S₂O₇ for disulfuric (pyrosulfuric) acid is obtained. Pure disulfuric acid is a solid at room temperature, melting at 36 °C and rarely used either in the laboratory or industrial processes.

Production

Oleum is produced in the

contact process The contact process is the current method of producing sulfuric acid in the high concentrations needed for industrial processes. Platinum was originally used as the catalyst for this reaction; however, as it is susceptible to reacting with arsenic ...

, where

sulfur Sulfur (or sulphur in British English) is a chemical element with the symbol S and atomic number 16. It is abundant, multivalent and nonmetallic. Under normal conditions, sulfur atoms form cyclic octatomic molecules with a chemical formula ...

is oxidized to

which is subsequently dissolved in concentrated sulfuric acid. Sulfuric acid itself is regenerated by dilution of part of the oleum. The

lead chamber process The lead chamber process was an industrial method used to produce sulfuric acid in large quantities. It has been largely supplanted by the contact process. In 1746 in Birmingham, England, John Roebuck began producing sulfuric acid in lead-lined ch ...

for sulfuric acid production was abandoned, partly because it could not produce sulfur trioxide or concentrated sulfuric acid directly due to corrosion of the lead, and absorption of NO₂ gas. Until this process was made obsolete by the contact process, oleum had to be obtained through indirect methods. Historically, the biggest production of oleum came from the

distillation Distillation, or classical distillation, is the process of separation process, separating the components or substances from a liquid mixture by using selective boiling and condensation, usually inside an apparatus known as a still. Dry distilla ...

of iron sulfates at

Nordhausen Nordhausen may refer to: * Nordhausen (district), a district in Thuringia, Germany ** Nordhausen, Thuringia, a city in the district **Nordhausen station, the railway station in the city * Nordhouse, a commune in Alsace (German: Nordhausen) * Narost ...

, from which the historical name Nordhausen sulfuric acid is derived.

Applications

Sulfuric acid production

Oleum is an important intermediate in the manufacture of sulfuric acid due to its high

enthalpy Enthalpy , a property of a thermodynamic system, is the sum of the system's internal energy and the product of its pressure and volume. It is a state function used in many measurements in chemical, biological, and physical systems at a constant ...

hydration Hydration may refer to: * Hydrate, a substance that contains water * Hydration enthalpy, energy released through hydrating a substance * Hydration reaction, a chemical addition reaction where a hydroxyl group and proton are added to a compound * ...

. When SO₃ is added to water, rather than dissolving, it tends to form a fine mist of sulfuric acid, which is difficult to manage. However, SO₃ added to concentrated sulfuric acid readily dissolves, forming oleum which can then be diluted with water to produce additional concentrated sulfuric acid. Typically, above concentrations of 98.3%, sulfuric acid will undergo a spontaneous

decomposition Decomposition or rot is the process by which dead organic substances are broken down into simpler organic or inorganic matter such as carbon dioxide, water, simple sugars and mineral salts. The process is a part of the nutrient cycle and is e ...

into sulfur trioxide and water : This means that sulfuric acid above said concentration will readily degenerate until it reaches 98.3%; this is impractical in some applications such as synthesis where anhydrous conditions are preferred (like alcohol eliminations). The addition of sulfur trioxide allows the concentration to be increased by means of

Le Chatelier's principle Le Chatelier's principle (pronounced or ), also called Chatelier's principle (or the Equilibrium Law), is a principle of chemistry used to predict the effect of a change in conditions on chemical equilibria. The principle is named after French c ...

As an intermediate for transportation

Oleum is a useful form for transporting sulfuric acid compounds, typically in rail tank cars, between oil refineries (which produce various sulfur compounds as a byproduct of refining) and industrial consumers. Certain compositions of oleum are solid at room temperature, and thus are safer to ship than as a liquid. Solid oleum can be converted into liquid at the destination by steam heating or dilution or concentration. This requires care to prevent overheating and evaporation of sulfur trioxide. To extract it from a tank car requires careful heating using steam conduits inside the tank car. Great care must be taken to avoid overheating, as this can increase the pressure in the tank car beyond the tank's safety valve limit. In addition, oleum is less corrosive to metals than sulfuric acid, because there is no free water to attack surfaces. Because of that, sulfuric acid is sometimes concentrated to oleum for in-plant pipelines and then diluted back to acid for use in industrial reactions. In

Richmond, California Richmond is a city in western Contra Costa County, California, United States. The city was municipal corporation, incorporated on August 7, 1905, and has a Richmond, California City Council, city council.

in 1993 a significant release occurred due to overheating, causing a release of sulfur trioxide that absorbed moisture from the atmosphere, creating a mist of micrometre-sized sulfuric acid particles that formed an inhalation health hazard. This mist spread over a wide area.

Organic chemistry research

Oleum is a harsh reagent, and is highly corrosive. One important use of oleum as a reagent is the secondary nitration of

nitrobenzene Nitrobenzene is an organic compound with the chemical formula C6H5 NO2. It is a water-insoluble pale yellow oil with an almond-like odor. It freezes to give greenish-yellow crystals. It is produced on a large scale from benzene as a precursor t ...

. The first nitration can occur with nitric acid in sulfuric acid, but this deactivates the ring towards further electrophilic substitution. A stronger reagent, oleum, is needed to introduce the second nitro group onto the aromatic ring.

Explosives manufacture

Oleum is used in the manufacture of many

explosives An explosive (or explosive material) is a reactive substance that contains a great amount of potential energy that can produce an explosion if released suddenly, usually accompanied by the production of light, heat, sound, and pressure. An expl ...

with the notable exception of

nitrocellulose Nitrocellulose (also known as cellulose nitrate, flash paper, flash cotton, guncotton, pyroxylin and flash string, depending on form) is a highly flammable compound formed by nitrating cellulose through exposure to a mixture of nitric acid and ...

. (In modern manufacturing of nitrocellulose, the H₂SO₄ concentration is often adjusted using oleum.) The chemical requirements for explosives manufacture often require anhydrous mixtures containing

nitric acid Nitric acid is the inorganic compound with the formula . It is a highly corrosive mineral acid. The compound is colorless, but older samples tend to be yellow cast due to decomposition into oxides of nitrogen. Most commercially available nitri ...

and

. Ordinary commercial grade nitric acid consists of the constant boiling azeotrope of nitric acid and water, and contains 68% nitric acid. Mixtures of ordinary nitric acid in sulfuric acid therefore contain substantial amounts of water and are unsuitable for processes such as those that occur in the manufacture of

trinitrotoluene Trinitrotoluene (), more commonly known as TNT, more specifically 2,4,6-trinitrotoluene, and by its preferred IUPAC name 2-methyl-1,3,5-trinitrobenzene, is a chemical compound with the formula C6H2(NO2)3CH3. TNT is occasionally used as a reage ...

. The synthesis of

RDX RDX (abbreviation of "Research Department eXplosive") or hexogen, among other names, is an organic compound with the formula (O2N2CH2)3. It is a white solid without smell or taste, widely used as an explosive. Chemically, it is classified as a n ...

and certain other explosives does not require oleum. Anhydrous nitric acid, referred to as

white fuming nitric acid Nitric acid is the inorganic compound with the formula . It is a highly corrosive mineral acid. The compound is colorless, but older samples tend to be yellow cast due to decomposition into oxides of nitrogen. Most commercially available nitric ...

, can be used to prepare water-free nitration mixtures, and this method is used in laboratory scale operations where the cost of material is not of primary importance. Fuming nitric acid is hazardous to handle and transport, because it is extremely corrosive and volatile. For industrial use, such strong nitration mixtures are prepared by mixing oleum with ordinary commercial nitric acid so that the free sulfur trioxide in the oleum consumes the water in the nitric acid.Urbanski, Vol 1, pp 347–349

Reactions

Like concentrated sulfuric acid, oleum is such a strong dehydrating agent that if poured onto powdered

glucose Glucose is a simple sugar with the molecular formula . Glucose is overall the most abundant monosaccharide, a subcategory of carbohydrates. Glucose is mainly made by plants and most algae during photosynthesis from water and carbon dioxide, using ...

, or virtually any other

sugar Sugar is the generic name for sweet-tasting, soluble carbohydrates, many of which are used in food. Simple sugars, also called monosaccharides, include glucose, fructose, and galactose. Compound sugars, also called disaccharides or double ...

, it will draw the hydrogen elements of water out of the sugar in an exothermic reaction, leaving a residue of nearly pure carbon as a solid. This carbon expands outward, hardening as a solid black substance with gas bubbles in it.

References

{{sulfur compounds Sulfates Sulfur oxoacids Acids