Oilseeds

Vegetable oils, or vegetable fats, are oils extracted from seeds or from other parts of fruits. Like animal fats, vegetable fats are ''mixtures'' of triglycerides. Soybean oil, grape seed oil, and cocoa butter are examples of seed oils, or fats from seeds. Olive oil, palm oil, and rice bran oil are examples of fats from other parts of fruits. In common usage, vegetable ''oil'' may refer exclusively to vegetable fats which are liquid at room temperature. Vegetable oils are usually edible.

Uses

In antiquity

Oils extracted from plants have been used since ancient times and in many cultures. Archaeological evidence shows that olives were turned into olive oil by 6000 BCE and 4500 BCE in present-day Israel and Palestine.

In addition to use as food, fats and oils (both vegetable and mineral) have long been used as fuel, typically in lamps which were a principal source of illumination in ancient times. Oils may have been used for lubrication, but there is no evidence for this. Vegetable oils were probably more valuable as food and lamp-oil; Babylonian mineral oil was known to be used as fuel, but there are no references to lubrication. Pliny the Elder reported that animal-derived fats such as lard were used to lubricate the axles of carts.

Culinary

Many vegetable oils are consumed directly, or indirectly as ingredients in food – a role that they share with some animal fats, including butter, ghee, lard, and schmaltz. The oils serve a number of purposes in this role:
* Shortening – as in giving pastries a crumbly texture.
* Enriching – adding calories and satisfaction in consumption
* Texture – altering how ingredients combine, especially fats and starches
* Flavoring – examples include olive, sesame, or almond oil
* Flavor base – oils can also "carry" flavors of other ingredients, such as peppers, since many flavors are due to chemicals that are soluble in oil.

Oils can be heated to temperatures significantly higher than the boiling point of water, , and used to fry foods. Oils for this purpose must have a high flash point. Such oils include both the major cooking oils – soybean, rapeseed, canola, sunflower, safflower, peanut, cottonseed, etc. – and tropical oils, such as coconut, palm, and rice bran. The latter are particularly valued in Asian cultures for high-temperature cooking, because of their unusually high flash points.

Industrial

Vegetable oils are used as an ingredient or component in many manufactured products.

Many vegetable oils are used to make soaps, skin products, candles, perfumes and other personal care and cosmetic products. Some oils are particularly suitable as drying oils, and are used in making paints and other wood treatment products. They are used in alkyd resin production. Dammar oil (a mixture of linseed oil and dammar resin), for example, is used almost exclusively in treating the hulls of wooden boats. Vegetable oils are increasingly being used in the electrical industry as insulators as vegetable oils are not toxic to the environment, biodegradable if spilled and have high flash and fire points. However, vegetable oils are less stable chemically, so they are generally used in systems where they are not exposed to oxygen, and they are more expensive than crude oil distillate. Synthetic tetraesters, which are similar to vegetable oils but with four fatty acid chains compared to the normal three found in a natural ester, are manufactured by Fischer esterification. Tetraesters generally have high stability to oxidation and have found use as engine lubricants. Vegetable oil is being used to produce biodegradable hydraulic fluid and lubricant.

One limiting factor in industrial uses of vegetable oils is that all such oils are susceptible to becoming rancid. Oils that are more stable, such as ben oil or mineral oil, are thus preferred for industrial uses. Castor oil has numerous industrial uses, owing to the presence of hydroxyl group on the fatty acid. Castor oil is a precursor to Nylon 11. Castor oil may also be reacted with epichlorohydrin to make a glycidyl ether which is used as a diluent and flexibilizer with epoxy resins.

Pet food additive

Vegetable oil is used in the production of some pet foods. AAFCO defines vegetable oil in this context as the product of vegetable origin obtained by extracting the oil from seeds or fruits which are processed for edible purposes.

Fuel

Vegetable oils are also used to make biodiesel, which can be used like conventional diesel. Some vegetable oil blends are used in unmodified vehicles but straight vegetable oil, also known as pure plant oil, needs specially prepared vehicles which have a method of heating the oil to reduce its viscosity. The use of vegetable oils as alternative energy is growing and the availability of biodiesel around the world is increasing.

The NNFCC estimates that the total net greenhouse gas savings when using vegetable oils in place of fossil fuel-based alternatives for fuel production, range from 18 to 100%.

Production

The production process of vegetable oil involves the removal of oil from plant components, typically seeds. This can be done via mechanical extraction using an oil mill or chemical extraction using a solvent. The extracted oil can then be purified and, if required, refined or chemically altered.

Mechanical extraction

Oils can be removed via mechanical extraction, termed "crushing" or "pressing." This method is typically used to produce the more traditional oils (e.g., olive, coconut etc.), and it is preferred by most health-food customers in the United States and in Europe. There are several different types of mechanical extraction. Expeller pressing extraction is common, though the screw press, ram press, and ghani (powered mortar and pestle) are also used. Oilseed presses are commonly used in developing countries, among people for whom other extraction methods would be prohibitively expensive; the ghani is primarily used in India. The amount of oil extracted using these methods varies widely, as shown in the following table for extracting mowrah butter in India:

Solvent extraction

The processing of vegetable oil in commercial applications is commonly done by chemical extraction, using solvent extracts, which produces higher yields and is quicker and less expensive. The most common solvent is petroleum-derived hexane. This technique is used for most of the "newer" industrial oils such as soybean and corn oils. After extraction, the solvent is evaporated out by heating the mixture to about .

Supercritical carbon dioxide can be used as a non-toxic alternative to other solvents.

Hydrogenation

Unsaturated vegetable oils can be transformed through partial or complete hydrogenation into oils of higher melting point, some of which, such as vegetable shortening, will remain solid at room temperature.

Hydrogenating vegetable oil is done by raising a blend of vegetable oil and a metal catalyst, typically nickel, in near-vacuum to very high temperatures, and introducing hydrogen. This causes the carbon atoms of the oil to break double-bonds with other carbons. Each carbon atom becomes single-bonded to an individual hydrogen atom, and the double bond between carbons can no longer exist. A fully hydrogenated oil, also called a saturated fat, has had all of its double bonds converted into single bonds. If a polyunsaturated oil is left incompletely-hydrogenated (not all of the double bonds are reduced to single bonds), then it is a "partially hydrogenated oil" (PHO). An oil may be hydrogenated to increase resistance to rancidity (oxidation) or to change its physical characteristics. As the degree of saturation is raised by full or partial hydrogenation, the oil's viscosity and melting point increase.

While full hydrogenation produces largely saturated fatty acids, partial hydrogenation results in the transformation of unsaturated cis fatty acids to unsaturated trans fatty acids in the oil mixture due to the heat used in hydrogenation. Partially hydrogenated oils and their trans fats have been linked to an increased risk of mortality from coronary heart disease, (Consultation on the health implications of alternatives to trans fatty acids: Summary of Responses from Experts) among other increased health risks. These concerns have led to regulations mandating the removal of partially hydrogenated oils from food.

Deodorization

In the processing of edible oils, the oil is heated under vacuum to near the smoke point or to about , and water is introduced at the bottom of the oil. The water immediately is converted to steam, which bubbles through the oil, carrying with it any chemicals which are water-soluble. The steam sparging removes impurities that can impart unwanted flavors and odors to the oil. Deodorization is key to the manufacture of vegetable oils. Nearly all soybean, corn, and canola oils found on supermarket shelves go through a deodorization stage that removes trace amounts of odors and flavors, and lightens the color of the oil. However, the process commonly results in higher levels of trans fatty acids and distillation of the oil's natural compounds.

Occupational exposure

People can breathe in vegetable oil mist in the workplace. The U.S. Occupational Safety and Health Administration (OSHA) has set the legal limit (permissible exposure limit) for vegetable oil mist exposure in the workplace as 15 mg/m³ total exposure and 5 mg/m³ respiratory exposure over an 8-hour workday. The U.S. National Institute for Occupational Safety and Health (NIOSH) has set a recommended exposure limit (REL) of 10 mg/m³ total exposure and 5 mg/m³ respiratory exposure over an 8-hour workday.

Yield

Typical productivity of some oil crops, measured in tons (t) of oil produced per hectare (ha) of land per year (yr). Oil palm is by far the highest yielding crop, capable of producing about 4 tons of palm oil per hectare per year.

Particular oils

The following triglyceride vegetable oils account for almost all worldwide production, by volume. All are used as both cooking oils and as SVO or to make biodiesel. According to the USDA, the total world consumption of major vegetable oils in 2007/08 was:, Table 03: Major Vegetable Oils: World Supply and Distribution a
Oilseeds: World Markets and Trade Monthly Circular

Note that these figures include industrial and animal feed use. The majority of European rapeseed oil production is used to produce biodiesel, or used directly as fuel in diesel cars which may require modification to heat the oil to reduce its higher viscosity.

Other significant oils include:

* Corn oil, one of the most common cooking oils, is used for cooking oil, salad dressing, margarine, mayonnaise, prepared goods like spaghetti sauce and baking mixes, and to fry prepared foods like potato chips and French fries.
* Grape seed oil, used in cooking and cosmetics
* Hazelnut oil and other nut oils
* Linseed oil, from flax seeds
* Rice bran oil, from rice grains
* Safflower oil, a flavorless and colorless cooking oil
* Sesame oil, used as a cooking oil, and as a massage oil, particularly in India
* Açaí palm oil, used in culinary and cosmetics
* Jambú oil, is extracted from the flowers, leaves and stem from jambu (''Acmella oleracea''), contains spilanthol
* Graviola oil, derived from ''Annona muricata''
* Tucumã oil, from ''Astrocaryum aculeatum'' is used to manufacture soap.
* Brazil nut oil, culinary and cosmetics use
* Carapa oil, pharmaceutical use and anti-mosquito candle
* Buriti oil, from ''Mauritia flexuosa'', used in cosmetics (skin and hair care)
* Passion fruit oil, derived from ''Passiflora edulis'', has varied applications in cosmetics manufacturing and for uses as a human or animal food.
* Pracaxi oil, obtained from ''Pentaclethra macroloba'', cosmetics use
* Solarium oil, derived from chloroplasts, various applications in cooking

Composition of fats

Seed oil

Seed oils are vegetable oils obtained from the seed (endosperm) of some plants, rather than the fruit (pericarp). Most vegetable oils are seed oils. Examples are sunflower, corn, and sesame oils.

Pre-pressing

Extracting the oils first by expeller or cold pressing methods, then solvent expelling the rest of the oils from the leftover matter. This is a method used by larger capacity oil mills. As the energy consumption of the mechanical press increases as more oil is released, it is more efficient to extract the rest of the oil (past around 60%) by solvent extraction.

History

Such oils have been part of human culture for millennia.Ruth Schuster (December 17, 2014). "8,000-year old olive oil found in Galilee, earliest known in world", ''Haaretz''. Retrieved December 17, 2014. Oils such as poppy seed, rapeseed, linseed, almond oil, sesame seed, safflower, and cottonseed were variously used since at least the Bronze Age in the Middle East. Vegetable oils have been used for lighting fuel, cooking, medicine and lubrication.
Palm oil has long been recognized in West and Central African countries, and European merchants trading with West Africa occasionally purchased palm oil for use as a cooking oil in Europe and it became highly sought-after commodity by British traders for use as an industrial lubricant for machinery during Britain's Industrial Revolution. Palm oil formed the basis of soap products, such as Lever Brothers' (now Unilever) "Sunlight", and
B. J. Johnson Company's (now Colgate-Palmolive) "Palmolive", and by around 1870, palm oil constituted the primary export of some West African countries.

In 1780 Carl Wilhelm Scheele demonstrated that fats were derived from glycerol. Thirty years later Michel Eugène Chevreul deduced that these fats were esters of fatty acids and glycerol. Wilhelm Normann, a German chemist introduced the hydrogenation of liquid fats in 1901, creating what later became known as trans fats, leading to the development of the global production of margarine and vegetable shortening.

In the USA cottonseed oil was developed, and marketed by Procter & Gamble as a creamed shortening – Crisco – as early as 1911. Ginning mills were happy to have someone haul away the cotton seeds. The extracted oil was refined and partially hydrogenated to give a solid at room temperature and thus mimic natural lard, and canned under nitrogen gas. Compared to the rendered lard Procter & Gamble was already selling to consumers, Crisco was cheaper, easier to stir into a recipe, and could be stored at room temperature for two years without turning rancid.

Soybeans are protein-rich, and the medium viscosity oil rendered from them was high in polyunsaturates. Henry Ford established a soybean research laboratory, developed soybean plastics and a soy-based synthetic wool, and built a car "almost entirely" out of soybeans. Roger Drackett had a successful new product with Windex, but he invested heavily in soybean research, seeing it as a smart investment. By the 1950s and 1960s, soybean oil had become the most popular vegetable oil in the US; today it is second only to palm oil. In 2018–2019, world production was at 57.4 MT with the leading producers including China (16.6 MT), US (10.9 MT), Argentina (8.4 MT), Brazil (8.2 MT), and EU (3.2 MT).

The early 20th century also saw the start of the use of vegetable oil as a fuel in diesel engines and in heating oil burners. Rudolf Diesel designed his engine to run on vegetable oil. The idea, he hoped, would make his engines more attractive to farmers having a source of fuel readily available. Diesel's first engine ran on its own power for the first time in Augsburg, Germany, on 10 August 1893 on nothing but peanut oil. In remembrance of this event, 10 August has been declared "International Biodiesel Day". The first patent on Biodiesel was granted in 1937. Periodic petroleum shortages spurred research into vegetable oil as a diesel substitute during the 1930s and 1940s, and again in the 1970s and early 1980s when straight vegetable oil enjoyed its highest level of scientific interest. The 1970s also saw the formation of the first commercial enterprise to allow consumers to run straight vegetable oil in their vehicles. However, biodiesel, produced from oils or fats using transesterification is more widely used. It is Led by Brazil, many countries built biodiesel plants during the 1990s, and it is now widely available for use in motor vehicles, and is the most common biofuel in Europe today. In France, biodiesel is incorporated at a rate of 8% in the fuel used by all French diesel vehicles.

In the mid-1970s, Canadian researchers developed a low-erucic-acid rapeseed cultivar. Because the word "rape" was not considered optimal for marketing, they coined the name "canola" (from "Canada Oil low acid"). The U.S. Food and Drug Administration approved use of the canola name in January 1985, and U.S. farmers started planting large areas that spring. Canola oil is lower in saturated fats, and higher in monounsaturates. Canola is very thin (unlike corn oil) and flavorless (unlike olive oil), so it largely succeeds by displacing soy oil, just as soy oil largely succeeded by displacing cottonseed oil.

Used oil

A large quantity of used vegetable oil is produced and recycled, mainly from industrial deep fryers in potato processing plants, snack food factories and fast food restaurants.

Recycled oil has numerous uses, including use as a direct fuel, as well as in the production of biodiesel, livestock feed, pet food, soap, detergent, cosmetics, and industrial chemicals.

Since 2002, an increasing number of European Union countries have prohibited the inclusion of recycled vegetable oil from catering in animal feed. Used cooking oils from food manufacturing, however, as well as fresh or unused cooking oil, continue to be used in their animal feed.

Shelf life

Due to their susceptibility to oxidation from the exposure to oxygen, heat and light, resulting in the formation of oxidation products, such as peroxides and hydroperoxides, plant oils rich in polyunsaturated fatty acids have a limited shelf-life.

Product labeling

In Canada, palm oil is one of five vegetable oils, along with palm kernel oil, coconut oil, peanut oil, and cocoa butter, which must be specifically named in the list of ingredients for a food product. Also, oils in Canadian food products which have been modified or hydrogenated must contain the word "modified" or "hydrogenated" when listed as an ingredient. A mix of oils other than the aforementioned exceptions may simply be listed as "vegetable oil" in Canada; however, if the food product is a cooking oil, salad oil or table oil, the type of oil must be specified and listing "vegetable oil" as an ingredient is not acceptable.

From December 2014, all food products produced in the European Union were legally required to indicate the specific vegetable oil used in their manufacture, following the introduction of the Food Information to Consumers Regulation.

See also

* Algae culture
* Cholesterol
* Decorticator
* Deodorizer
* Essential oils
* Fatty acid
* Fatty acid methyl ester
* Food extrusion
* Fragrance oil
* Lipid
* List of macerated oils
* List of vegetable oils
* Neem
* Non-food crops
* Oleochemistry
* Soap
* Vernonia oil
* Vegetable oil recycling

Notes and references

Further reading

*
*
*

{{DEFAULTSORT:Vegetable oil

Plant products