HOME

TheInfoList



OR:

The oersted (symbol Oe) is the coherent derived unit of the auxiliary magnetic field H in the
centimetre–gram–second system of units The centimetre–gram–second system of units (abbreviated CGS or cgs) is a variant of the metric system based on the centimetre as the unit of length, the gram as the unit of mass, and the second as the unit of time. All CGS mechanical units a ...
(CGS). It is equivalent to 1
dyne The dyne (symbol: dyn; ) is a derived unit of force specified in the centimetre–gram–second (CGS) system of units, a predecessor of the modern SI. History The name dyne was first proposed as a CGS unit of force in 1873 by a Committee of ...
per maxwell.


Difference between CGS and SI systems

In the CGS system, the unit of the
H-field A magnetic field is a vector field that describes the magnetic influence on moving electric charges, electric currents, and magnetic materials. A moving charge in a magnetic field experiences a force perpendicular to its own velocity and to ...
is the oersted and the unit of the
B-field A magnetic field is a vector field that describes the magnetic influence on moving electric charges, electric currents, and magnetic materials. A moving charge in a magnetic field experiences a force perpendicular to its own velocity and to ...
is the
gauss Johann Carl Friedrich Gauss (; german: Gauß ; la, Carolus Fridericus Gauss; 30 April 177723 February 1855) was a German mathematician and physicist who made significant contributions to many fields in mathematics and science. Sometimes refer ...
. In the SI system, the unit ampere per meter (A/m), which is equivalent to newton per weber, is used for the H-field and the unit of tesla is used for the B-field.


History

The unit was established by the
IEC The International Electrotechnical Commission (IEC; in French: ''Commission électrotechnique internationale'') is an international standards organization that prepares and publishes international standards for all electrical, electronic and r ...
in the 1930s in honour of Danish physicist Hans Christian Ørsted. Ørsted discovered the connection between magnetism and electric current when a magnetic field produced by a current-carrying copper bar deflected a magnetised needle during a lecture demonstration.


Definition

The oersted is defined as a
dyne The dyne (symbol: dyn; ) is a derived unit of force specified in the centimetre–gram–second (CGS) system of units, a predecessor of the modern SI. History The name dyne was first proposed as a CGS unit of force in 1873 by a Committee of ...
per unit pole. The oersted is (≈) amperes per meter, in terms of
SI units The International System of Units, known by the international abbreviation SI in all languages and sometimes Pleonasm#Acronyms and initialisms, pleonastically as the SI system, is the modern form of the metric system and the world's most wid ...
. The H-field strength inside a long
solenoid upright=1.20, An illustration of a solenoid upright=1.20, Magnetic field created by a seven-loop solenoid (cross-sectional view) described using field lines A solenoid () is a type of electromagnet formed by a helix, helical coil of wire whose ...
wound with 79.58 turns per meter of a wire carrying 1 A is approximately 1 oersted. The preceding statement is exactly correct if the solenoid considered is infinite in length with the current evenly distributed over its surface. The oersted is closely related to the gauss (G), the CGS unit of magnetic flux density. In a vacuum, if the magnetizing field strength is 1 Oe, then the magnetic field density is 1 G, whereas, in a medium having permeability (relative to permeability of vacuum), their relation is: :B(\text) = \mu_\text H(\text) Because oersteds are used to measure magnetizing field strength, they are also related to the
magnetomotive force In physics, the magnetomotive force (mmf) is a quantity appearing in the equation for the magnetic flux in a magnetic circuit, often called Ohm's law for magnetic circuits. It is the property of certain substances or phenomena that give rise to ...
(mmf) of current in a single-winding wire-loop: :1\text= \frac \text/\text


Stored energy

The stored energy in a magnet, called ''magnet performance'' or ''maximum energy product'' (often abbreviated BHmax), is typically measured in units of megagauss-oersteds (MG⋅Oe).


See also

*
Centimetre–gram–second system of units The centimetre–gram–second system of units (abbreviated CGS or cgs) is a variant of the metric system based on the centimetre as the unit of length, the gram as the unit of mass, and the second as the unit of time. All CGS mechanical units a ...
* Ampere's model of magnetization


References

{{CGS units Centimetre–gram–second system of units Units of magnetic induction