Occlusion, in a
dental context, means simply the contact between teeth. More technically, it is the relationship between the
maxilla
The maxilla (plural: ''maxillae'' ) in vertebrates is the upper fixed (not fixed in Neopterygii) bone of the jaw formed from the fusion of two maxillary bones. In humans, the upper jaw includes the hard palate in the front of the mouth. The t ...
ry (upper) and
mandibular
In anatomy, the mandible, lower jaw or jawbone is the largest, strongest and lowest bone in the human facial skeleton. It forms the lower jaw and holds the lower teeth in place. The mandible sits beneath the maxilla. It is the only movable bone ...
(lower) teeth when they approach each other, as occurs during chewing or at rest.
Static occlusion refers to contact between teeth when the jaw is closed and stationary, while dynamic occlusion refers to occlusal contacts made when the jaw is moving.
The masticatory system also involves the
periodontium
The periodontium is the specialized tissues that both surround and support the teeth, maintaining them in the maxillary and mandibular bones. The word comes from the Greek terms περί ''peri''-, meaning "around" and -''odont'', meaning "tooth". ...
, the
TMJ
In anatomy, the temporomandibular joints (TMJ) are the two joints connecting the jawbone to the skull. It is a bilateral synovial articulation between the temporal bone of the skull above and the mandible below; it is from these bones that i ...
(and other skeletal components) and the neuromusculature, therefore the tooth contacts should not be looked at in isolation, but in relation to the overall masticatory system.
Anatomy of Masticatory System
![TMJ movements](https://upload.wikimedia.org/wikipedia/commons/6/63/TMJ_movements.jpg)
One cannot fully understand occlusion without an in depth understanding of the anatomy including that of the teeth,
TMJ
In anatomy, the temporomandibular joints (TMJ) are the two joints connecting the jawbone to the skull. It is a bilateral synovial articulation between the temporal bone of the skull above and the mandible below; it is from these bones that i ...
, musculature surrounding this and the skeletal components.
The Dentition and Surrounding Structures
The human dentition consists of 32
permanent teeth
Permanent teeth or adult teeth are the second set of teeth formed in diphyodont mammals. In humans and old world simians, there are thirty-two permanent teeth, consisting of six maxillary and six mandibular molars, four maxillary and four mandibul ...
and these are distributed between the
alveolar bone
The alveolar process () or alveolar bone is the thickened ridge of bone that contains the tooth sockets on the jaw bones (in humans, the maxilla and the mandible). The structures are covered by gums as part of the oral cavity.
The synonymous ter ...
of the maxillary and mandibular arch. Teeth consist of two parts: the crown, which is visible in the mouth and lies above the gingival soft tissue and the roots, which are below the level of the
gingiva
The gums or gingiva (plural: ''gingivae'') consist of the mucosal tissue that lies over the mandible and maxilla inside the mouth. Gum health and disease can have an effect on general health.
Structure
The gums are part of the soft tissue lini ...
and in the alveolar bone.
The periodontal ligament unites the cementum on the outside of the root and the alveolar bone. This bundle of connective tissue fibres is vital in dissipating forces that are applied to the underlying bone during the contact of teeth in function.
The teeth are highly specialised and different teeth are involved in specific functions. The masticatory system is largely influenced by these intra and inter-arch relationships and a wider understanding of the anatomy can greatly benefit those who want to understand occlusion.
Skeletal Components
The
maxilla
The maxilla (plural: ''maxillae'' ) in vertebrates is the upper fixed (not fixed in Neopterygii) bone of the jaw formed from the fusion of two maxillary bones. In humans, the upper jaw includes the hard palate in the front of the mouth. The t ...
forms a crucial aspect of the upper facial skeleton. Two irregularly shaped bones fuse at the intermaxillary suture during development forming the upper jaw. This forms the palate of the oral cavity and also supports the alveolar ridges that hold the upper teeth in place. The lower facial skeleton on the other hand, is formed of the
mandible
In anatomy, the mandible, lower jaw or jawbone is the largest, strongest and lowest bone in the human facial skeleton. It forms the lower jaw and holds the lower tooth, teeth in place. The mandible sits beneath the maxilla. It is the only movabl ...
, a U shaped bone, which supports the lower teeth and also forms part of the
TMJ
In anatomy, the temporomandibular joints (TMJ) are the two joints connecting the jawbone to the skull. It is a bilateral synovial articulation between the temporal bone of the skull above and the mandible below; it is from these bones that i ...
. The mandibular condyle and the squamous portion of the
temporal bone
The temporal bones are situated at the sides and base of the skull, and lateral to the temporal lobes of the cerebral cortex.
The temporal bones are overlaid by the sides of the head known as the temples, and house the structures of the ears. Th ...
, at the base of the cranium articulate with one another.
TMJ
The TMJ is formed from the temporal bone of the cranium, specifically the glenoid fossa and articular tubercle and the condyle of the mandible, with a fibrocartilaginous disc lying in between. It is classified as a ginglymoarthrodial joint
and can perform a range of gliding and hinge type movements. The disc, which lies in between is composed of dense fibrous tissue and is predominantly avascular and lacking nerves.
Muscles
There are various muscles that contribute to occlusion of the teeth including the muscles of mastication and other accessory muscles. The temporalis, masseter, medial and lateral pterygoids are the muscles of mastication and these contribute to the elevation, depression, protrusion and retraction of the mandible. The anterior and posterior belly of the digastric are also involved in the depression of the mandible and elevation of the hyoid bone and are therefore relevant to the masticatory system.
Ligaments
There are various ligaments associated with the TMJ and these limit and restrict border movements by acting as passive restraining devices. They do not contribute to joint function, rather exert a protective role. The key ligaments relevant to the TMJ are:
* The temporomandibular ligament
* The medial and lateral discal ligaments
* The sphenomandibular ligament
* The stylomandibular ligament
Development of occlusion
![Leeway space](https://upload.wikimedia.org/wikipedia/commons/c/c3/Leeway_space.jpg)
As the
primary (baby) teeth begin to erupt at 6 months of age, the
maxilla
The maxilla (plural: ''maxillae'' ) in vertebrates is the upper fixed (not fixed in Neopterygii) bone of the jaw formed from the fusion of two maxillary bones. In humans, the upper jaw includes the hard palate in the front of the mouth. The t ...
ry and
mandibular
In anatomy, the mandible, lower jaw or jawbone is the largest, strongest and lowest bone in the human facial skeleton. It forms the lower jaw and holds the lower teeth in place. The mandible sits beneath the maxilla. It is the only movable bone ...
teeth aim to occlude with one another. The erupting teeth are moulded into position by the
tongue
The tongue is a muscular organ (anatomy), organ in the mouth of a typical tetrapod. It manipulates food for mastication and swallowing as part of the digestive system, digestive process, and is the primary organ of taste. The tongue's upper surfa ...
, the
cheek
The cheeks ( la, buccae) constitute the area of the face below the eyes and between the nose and the left or right ear. "Buccal" means relating to the cheek. In humans, the region is innervated by the buccal nerve. The area between the inside ...
s and
lip
The lips are the visible body part at the mouth of many animals, including humans. Lips are soft, movable, and serve as the opening for food intake and in the articulation of sound and speech. Human lips are a tactile sensory organ, and can be ...
s during development. Upper and lower primary teeth should be correctly occluding and aligned after 2 years whilst they are continuing to develop, with full root development complete at 3 years of age.
Around a year after
development of the teeth is complete, the jaws continue to grow which results in spacing between some of the teeth (
diastema
A diastema (plural diastemata, from Greek διάστημα, space) is a space or gap between two teeth. Many species of mammals have diastemata as a normal feature, most commonly between the incisors and molars. More colloquially, the condition ...
). This effect is greatest in the anterior (front) teeth and can be seen from around age 4 – 5 years.
This spacing is important as it allows space for the
permanent (adult) teeth to erupt into the correct occlusion, and without this spacing there is likely to be crowding of the permanent dentition.
In order to fully understand the development of occlusion and
malocclusion
In orthodontics, a malocclusion is a misalignment or incorrect relation between the teeth of the upper and lower dental arches when they approach each other as the jaws close. The English-language term dates from 1864; Edward Angle (1855-1930), ...
, it is important to understand the
premolar
The premolars, also called premolar teeth, or bicuspids, are transitional teeth located between the canine and molar teeth. In humans, there are two premolars per quadrant in the permanent set of teeth, making eight premolars total in the mouth ...
dynamics in the mixed dentition stage. The mixed dentition stage is when both primary and permanent teeth are present. The permanent premolars erupt ~9–12 years of age, replacing the primary molars. The erupting premolars are smaller than the teeth they are replacing and this difference in space between the primary molars and their successors (1.5mm for maxillary, 2.5mm for mandibular), termed Leeway Space. This allows the permanent molars to drift mesially into the spaces and develop a Class I occlusion.
Incisor and molar classification
Classification of occlusion and malocclusion plays an important role in diagnosis and treatment planning in
orthodontics
Orthodontics is a dentistry specialty that addresses the diagnosis, prevention, management, and correction of mal-positioned teeth and jaws, and misaligned bite patterns. It may also address the modification of facial growth, known as dentofacial ...
. In order to describe the relationship of the maxillary molars to the mandibular molars, the Angle’s classification of malocclusion has commonly been used for many years.
This system has also been adapted in an attempt to classify the relationship between the incisors of the two arches.
Incisor Relationship
When describing the relationship between maxillary and mandibular
incisor
Incisors (from Latin ''incidere'', "to cut") are the front teeth present in most mammals. They are located in the premaxilla above and on the mandible below. Humans have a total of eight (two on each side, top and bottom). Opossums have 18, whe ...
s, the following categories make up Angle's incisal relationship classification:
* Class I: Mandibular incisors contact the maxillary incisors in the middle third or on the
cingulum of the palatal surface
* Class II: Mandibular incisors contact the maxillary incisors on the palatal surface, in the
gingival
The gums or gingiva (plural: ''gingivae'') consist of the mucosal tissue that lies over the mandible and maxilla inside the mouth. Gum health and disease can have an effect on general health.
Structure
The gums are part of the soft tissue linin ...
third or posterior to the cingulum. This class may be further subdivided into division I and division II:
**Division I includes maxillary incisors which are proclined (90%) and these individuals have a greater horizontal overlap - this is termed
overjet
Overjet is the extent of horizontal ( anterior-posterior) overlap of the maxillary central incisors over the mandibular central incisors. In class II (division I) malocclusion the overjet is increased as the maxillary central incisors are protrud ...
**Division II includes those with retroclined (10%) incisors, which leads to an increase in vertical overlap - this is termed
overbite
Overbite is the extent of vertical ( superior-inferior) overlap of the maxillary central incisors over the mandibular central incisors, measured relative to the incisal ridges.
The term overbite does not refer to a specific condition, nor is ...
* Class III: Mandibular incisors occlude with the maxillary incisors on the palatal surface, in the incisal third specifically or anterior to the cingulum
** In some cases the overjet is reversed (<0mm) and the mandibular incisors lie anterior to the maxillary incisors
Molar Relationship
![Molar relationship](https://upload.wikimedia.org/wikipedia/commons/c/cf/Molar_relationship.jpg)
When discussing the occlusion of the posterior teeth, the classification refers to the first
molars
The molars or molar teeth are large, flat teeth at the back of the mouth. They are more developed in mammals. They are used primarily to grind food during chewing. The name ''molar'' derives from Latin, ''molaris dens'', meaning "millstone to ...
and may be divided into three categories:
* Class I: The mandibular first molar occludes mesially to the maxillary first molar, with the
mesiobuccal cusp of maxillary first molar occluding in the
buccal groove of mandibular first molar
* Class II: The mesiobuccal cusp of the maxillary first molar occludes anterior to the buccal groove of the mandibular first molar
* Class III: If the mesiobuccal cusp of the maxillary first molar occludes posterior to the buccal groove of the mandibular first molar
Any deviation from the normal relation of teeth (Class I) is considered a malocclusion.
Class I relationships are thought to be “ideal”, however this classification does not take into consideration the positions of the two TMJ’s . Class II and III molar and incisor relationships are thought to be forms of malocclusion, however not all of these are severe enough to require orthodontic treatment. The Index of Orthodontic Treatment Need is a system that attempts to rank malocclusions in terms of significance of various occlusal traits and perceived aesthetic impairment. The index identifies those who would benefit most from orthodontic treatment and onward referral to an orthodontist.
Occlusal terminology
![ICP2](https://upload.wikimedia.org/wikipedia/commons/f/f5/ICP2.jpg)
Intercuspal Position (ICP), also known as Habitual Bite, Habitual Position or Bite of Convenience , is defined at the position where the maxillary and mandibular teeth fit together in maximum interdigitation. This position is usually the most easily recorded and is almost always the occlusion the patient closes into when they are asked to 'bite together'. This is the occlusion that the patient is accustomed to, hence sometimes termed the Habitual Bite.
Centric relation (CR) describes a reproducible jaw relationship (between the mandible and maxilla) and is independent of tooth contact. This is the position in which the mandibular
condyles
A condyle (;Entry "condyle"
in
articular eminence
The articular tubercle (eminentia articularis) is a bony eminence on the temporal bone in the skull. It is a rounded eminence of the anterior root of the posterior end of the outer surface of the squama temporalis. This tubercle forms the front bou ...
.
It is said that in CR, the muscles are in their most relaxed and least stressed state. This position is not influenced by muscle memory, but rather by the ligament which suspend the condyles within the fossa. Therefore it is the position that dentists use to create new occlusal relationships as for example, while making maxillary and mandibular complete dentures.
When the mandible is in this retruded position, it opens and closes on an arc of curvature around an imaginary axis drawn through the centre of the head of both condyles. This imaginary axis is termed the ''terminal hinge axis''. The first tooth contact that occurs when the mandible closes in the terminal hinge axis position, is termed Retruded Contact Position (RCP).
RCP can be reproduced within 0.08mm of accuracy due to the non-elastic TMJ capsule and restriction by the capsular ligaments, thus it can be considered a ‘border movement’ in
Posselt’s envelope.
![Posselts envolope of movement](https://upload.wikimedia.org/wikipedia/commons/4/45/Posselts_envolope_of_movement.jpg)
Centric Occlusion (CO) is a confusing term, and is often incorrectly used synonymously with RCP. Both terms are used to define a position where the condyles are in CR, however RCP describes the initial tooth contact on closure, however this may be an interference contact. On the other hand, CO refers to the occlusion where the teeth are in maximum intercuspation in CR. Posselt (1952) determined that only in 10% of natural tooth and jaw relationships does ICP = CO
(maximum intercuspation in CR) and so the term RCP is more appropriate when discussing the occlusion that occurs when the condyles are in their retruded position. CO is a term that is more relevant to complete denture application or where multiple fixed unit prosthodontics are provided, where the occlusion is arranged so that when the mandible is in CR, the teeth are interdigitating.
Posselt's Envelope of Border Movements
Posselt’s Envelope of Border Movement (often referred to as the 'border movements of the mandible') is a schematic diagram of the maximum jaw movement in three planes (sagittal, horizontal and frontal). This encompasses all movements away from RCP, and includes:
* Protrusive movements: When the mandible moves forward from centric relation, this is considered as protrusion.
In Class I occlusion, the predominant contacts occur on the incisal and
labial
The term ''labial'' originates from '' Labium'' (Latin for "lip"), and is the adjective that describes anything of or related to lips, such as lip-like structures. Thus, it may refer to:
* the lips
** In linguistics, a labial consonant
** In zoolog ...
surfaces of the mandibular incisors and the incisal edges and palatal fossa areas of the maxillary incisors.
* Lateral movements: When the mandible moves to the left or right, the mandibular posterior teeth move laterally across the opposing teeth. For example, when the mandible moves to the right, the right mandibular teeth move laterally across their opponents and this is termed the working side of the mandible (the side towards which the mandible is moving). In contrast, the left mandibular teeth move medially, downwards and anteriorly across their opposing posteriors and this is called the non-working side (the side to which the mandible is moving away from).
* Retrusive movements: This is when the mandible moves posteriorly from ICP. Compared with protrusive and lateral movements, retrusive movements are generally considerably smaller with a range of movement around 1 or 2 mm due to restriction by the ligamentous structures.
Guidance, natural teeth and function
![Bennet Angle](https://upload.wikimedia.org/wikipedia/commons/2/29/Bennet_Angle.jpg)
Mandibular movements are guided by two different systems; the ‘posterior’ guidance system and the ‘anterior’ guidance system
Posterior guidance system
Posterior guidance refers to TMJ articulations and associated structures . It is the condyles within the fossa and the associated muscles and ligaments together with its neuromuscular link that determines mandibular movements. Lateral, protrusive and repressive excursions of the mandible are guided by the posterior system.
''Lateral excursions''
It is important to define the movement of the condyles in lateral excursions:
- Working condyle: This is the condyle closest to the side which the mandible is moving (e.g. if the mandible moves laterally to the right, the right condyle is the working side condyle)
- Non-working condyle: This is the side to which the mandible is moving away from (e.g. if the mandible moves laterally to the right, the left condyle is the non-working side condyle)
* The maximum lateral movement of the mandible to the left or right side is approximately 10-12mm
* The primary movement in lateral excursions occurs on the non-working side (NWS) condyle (also called the balancing or orbiting condyle). The NWS condylar head moves in a downward, forward and medial direction. This movement is defined against two separate planes, the vertical and horizontal plane
** Bennet Angle : the angle of medial movement on NWS condyle relative to the vertical plane
** Condylar Angle : the angle of downwards movement of the NWS condyle relative to the horizontal plane
* The working side (WS) condyle (also called the rotating condyle) undergoes an immediate, non-progressive lateral shift. This movement is called the Bennet movement (however this may be confused with the Bennet Angle), so this is more commonly referred to as an Immediate Side Shift. The condyle is seen to rotate with a slight lateral shift in the direction of movement
''Protrusive movements''
* The condylar heads predominantly translate forwards and downwards along the distal face of the articular face in the glenoid fossa. Protrusive movements are restricted by the ligamentous structures to a maximum of ~8-11mm (depending on skull morphology and size of subject)
''Retrusive movements''
* As for retrusion, this movement is restricted by the ligamentous structures and the maximum retrusive limit is usually ~1mm however 2-3mm is rarely seen in some patients.
We can not influence the posterior guidance system through dental restorative treatment.
Anterior guidance system
Anterior guidance refers to the influence of contacting teeth on the paths of mandibular movements. The tooth contacts may be anterior, posterior tooth contacts or both - however termed anterior guidance as these contacts are still anterior to the TMJ. This can be further classified into:
![Canine guidance](https://upload.wikimedia.org/wikipedia/commons/2/21/Canine_guidance.jpg)
''Canine Guidance''
* Dynamic occlusion that occurs on the
canines
Canine may refer to:
Zoology and anatomy
* a dog-like Canid animal in the subfamily Caninae
** ''Canis'', a genus including dogs, wolves, coyotes, and jackals
** Dog, the domestic dog
* Canine tooth, in mammalian oral anatomy
People with the surn ...
(on the working side) during lateral excursions of the mandible.
* These teeth are best suited to accept horizontal forces in eccentric movements due to their long roots and good crown/root ratio
*It is easy for the dental technicians during wax up and construction of restoration to provide this
''Group Function''
* Multiple contacts between the maxillary and mandibular teeth in lateral movements on the WS whereby simultaneous contact of several teeth acts as a group to distribute occlusal forces.
* It is preferable for this guidance to be as anterior as possible e.g.
premolar
The premolars, also called premolar teeth, or bicuspids, are transitional teeth located between the canine and molar teeth. In humans, there are two premolars per quadrant in the permanent set of teeth, making eight premolars total in the mouth ...
s rather than
molars
The molars or molar teeth are large, flat teeth at the back of the mouth. They are more developed in mammals. They are used primarily to grind food during chewing. The name ''molar'' derives from Latin, ''molaris dens'', meaning "millstone to ...
, as there is increased force applied when the contacts are closer to the TMJ.
''Incisal Guidance''
* The influence of the contacting surfaces of the mandibular and maxillary incisors on mandibular movements
is characterised by the overbite and overjet of the
maxillary incisors.
In restorative treatment, it is possible to manipulate and design anterior guidance systems that is in harmony with the masticatory system.
Clinical relevance of guidance
Tooth contact involved in guidance is particularly important as these occlude a vast number of times per day and so need to be able to resist both heavy and non-axial occlusal loads. When restoring the anterior guidance system should be compatible with the posterior guidance system. This means that excessive strain should not be applied on the posterior guidance system which is limited by the ligamemtous structures.
Upon restoration of the occlusal surfaces of teeth, it is likely to change the occlusion and therefore guidance systems. It is unlikely the TMJ will adapt to these changes in occlusion, but rather the teeth adapt to the new occlusion through tooth wear, tooth movement or fracture. For this reason, it is important to consider these guidance concepts when providing restorations. Guidance should also be considered before restorations as it should not be expected for a heavily restored tooth to provide guidance alone as this leaves the tooth vulnerable to fracture during function.
Organisation of the occlusion
The arrangement of teeth in function is important and over the years three recognised concepts have been developed to describe how teeth should and should not contact:
# Bilateral balanced occlusion
# Unilateral balanced occlusion
# Mutually protected occlusion
Bilateral balanced occlusion
This concept is based on the
curve of Spee
In anatomy, the Curve of Spee (called also von Spee's curve or Spee's curvature) is defined as the curvature of the mandibular occlusal plane beginning at the canine and following the buccal cusps of the posterior teeth, continuing to the terminal ...
and curve of Wilson and is becoming outdated for the restored natural dentition. However, it still finds application in removable
prosthodontics
Prosthodontics, also known as dental prosthetics or prosthetic dentistry, is the area of dentistry that focuses on dental prostheses. It is one of 12 dental specialties recognized by the American Dental Association (ADA), Royal College of Surge ...
. This scheme involves contacts on as many teeth as possible (both on the working and non-working side) in all excursive movements of the mandible. This is especially important in the case of
complete denture
A complete denture (also known as a full denture, false teeth or plate) is a removable appliance used when all teeth within a jaw have been lost and need to be prosthetically replaced. In contrast to a partial denture, a complete denture is cons ...
provision as contacting teeth on the NWS help stabilise the denture bases in mandibular movement. It was believed in the 1930s that this arrangement was ideal for the natural dentition when providing full occlusal reconstruction in order to distribute the stresses. However, it was found that the lateral forces placed on the restored posterior teeth produced damaging effects on the restorations.
Unilateral balanced occlusion
On the other hand, unilateral balanced occlusion is a widely used tooth arrangement that is used in current dentistry and is commonly known as ''group function''. This concept is based on the observation that NWS contacts were destructive
and therefore the teeth on the NWS should be free of any eccentric contacts, and instead the contacts should be distributed on the WS thus sharing the occlusal load. Group function is used when canine guidance cannot be achieved and also in the Pankey-Mann Schuyler (PMS) approach where it was deemed better than canine guidance as it distributed the loading on the WS better.
Mutually protected occlusion
![Posterior disocclusion](https://upload.wikimedia.org/wikipedia/commons/b/bc/Posterior_disocclusion.jpg)
''The Journal of Prosthetic Dentistry'' (2017) defines
mutually protected occlusion In dentistry, a mutually protected occlusion is an occlusal scheme in which the anterior teeth protect the posterior teeth, and vice versa.
The anterior teeth protect the posterior teeth by providing for a plane of guidance during excursions, thu ...
as ‘an occlusal scheme in which the
posterior teeth {{unreferenced, date=November 2015
In dentistry, the term posterior teeth usually refers as a group to the premolars and molars, as distinguished from the anterior teeth, which are the incisors and canine teeth. The distinction is one of anterior ( ...
prevent excessive contact of the
anterior teeth
In dentistry, the term anterior teeth usually refers as a group to the incisors and canine teeth as distinguished from the posterior teeth, which are the premolars and molars. The distinction is one of anterior (front of the body) versus posterio ...
in maximal intercuspal position, and the anterior teeth disengage the posterior teeth in all mandibular excursive movements’
In eccentric movements, damaging forces are applied to the posterior teeth and the anteriors are best suited to receiving these. Therefore during protrusive movements, the contact or guidance of the anteriors should be adequate to disocclude and protect the posterior teeth.
In contrast, the posterior teeth are more suited to accept the forces that are applied during closure of the mandible. This is because the posteriors are positioned so the forces are applied directly along the long axis of the tooth and are able to dissipate them efficiently whereas the anteriors cannot accept these heavy forces as well due to their labial positioning and angulation. It is therefore accepted that the posterior teeth should have heavier contacts than the anteriors in ICP and act as a stop for vertical closure.
Additionally, in lateral excursions either canine or group function should act to disclude the posterior teeth on the WS because, as described above, the anterior teeth are best suited to dissipate damaging horizontal forces, as well as the contact being further away from the TMJ, so the forces created are decreased in strength. Group function or canine guidance should also provide disocclusion of the teeth on the NWS as the amount and direction of force applied to the TMJ and teeth can be destructive due to an increase in muscle activity. An absence of NWS contacts also allows smooth movement of the working side condyle as a contact may disengage the guidance of the condyle and therefore cause an unstable mandibular relationship.
Deflective contacts and interferences
A deflective contact is a contact that diverts the mandible from its intended movement.
An example of this is when the mandible is deflected into ICP by the RCP-ICP slide, which path is determined by the deflective tooth contacts. This is often involved in function (e.g.
chewing
Chewing or mastication is the process by which food is crushed and ground by teeth. It is the first step of digestion, and it increases the surface area of foods to allow a more efficient break down by enzymes. During the mastication process, th ...
), however in some cases these deflective contacts can be damaging and may lead to pain around the tooth (often associated with
bruxism
Bruxism is excessive teeth grinding or jaw clenching. It is an oral parafunctional activity; i.e., it is unrelated to normal function such as eating or talking. Bruxism is a common behavior; reports of prevalence range from 8% to 31% in the gene ...
). However, some patients may be totally unaware of similar deflective contacts suggesting that it is the patient's adaptability rather than the contact that may influence the patient's presentation.
An occlusal interference is any tooth contact that prevents, or hinders harmonious mandibular movement (an undesirable tooth contact).
![NWSI](https://upload.wikimedia.org/wikipedia/commons/4/48/NWSI.jpg)
The occlusal interferences may be classified as follows:
# Working Side Interference: When there is a heavy or early tooth contact between the maxillary and mandibular teeth on the side that the mandible is moving towards, and this contact may or may not discludes the anteriors.
# Non-Working Side Interference: An occlusal contact on the side the mandible is moving away from that prevents harmonious movement of the mandible. These have the potential to be more destructive in comparison to WS interferences due to the obliquely directed forces.
# Protrusive Interference: Contacts that occur between the distal aspects of the maxillary posterior teeth and the mesial aspect of the mandibular posterior teeth. These interferences are potentially very damaging and may even cause an inability to incise properly due to the close proximity of the interference to the muscle.
When the dentist is providing restorations, it is important that these do not create an interference, otherwise the restoration will receive increased loading. As for deflective contacts, interferences may also be associated with parafunction such as bruxism (although evidence is weak) and may adversely affect the distribution of heavy occlusal forces. Interferences may also cause pain in the masticatory muscles due to altering their activity, however there is large controversy and debate as to whether there is a relationship between
occlusion and temporomandibular disorders. Almost all dentate individuals have occlusal interferences, and therefore they are not seen to be an etiology of all TMDs. When there is an acute change or significant instability in the occlusal condition and subsequently represents an etiological factor for a TMD, occlusal treatment is required.
Occlusal adjustment (removal of occlusal interferences) may be carried out in order to obtain a stable occlusal relationship and is achieved by selectively grinding the occlusal interferences or through wear of a hard occlusal splint to ensure true retruded relationship is established.
'Ideal' occlusion
When there is an absence of symptoms and the masticatory system is functioning efficiently, the occlusion is considered normal or physiological.
It is understood that no such ‘ideal’ occlusion exists for everyone, but rather each individual has their own 'ideal occlusion'. This is not focused on any specific occlusal configuration but rather occurs when the person’s occlusion is in harmony with the rest of the
stomatognathic system (TMJ, teeth and supporting structures, and the neuromuscular elements).
However, an optimal functional occlusion is important to consider when providing restorations as this helps to understand what is trying to be achieved. It is defined in established texts
as:
1. Centric occlusion and centric relation being in harmony (CO=CR)
* There should be even and simultaneous contacts of all posterior teeth when the mouth is closed and the condyles are lying in their most superior and anterior position, resting against the posterior slope of the articular eminence (CR)
* Note that the anterior teeth should also be occluding, but the contact should be lighter than the posterior contacts
2. Freedom in CO
* This means the mandible is still able to move slightly in the sagittal and horizontal plane in centric occlusion
*This is also part of the PMS theory of occlusion
mentioned earlier in ''organisation of occlusion''.
3. Immediate and lasting posterior disocclusion upon mandibular movement
* During lateral excursive movements, the working side contacts act to disclude the non-working side immediately
* During protrusive movements, the anterior tooth contact and guidance acts to disclude the posterior teeth immediately
4. Canine guidance is considered the best anterior guidance system
* This is due to their ability to accept horizontal forces as they have the longest and largest roots as well as a desirable crown/root ratio
* They are also surrounded by dense compact bone unlike the posterior teeth which makes them more suited to tolerate horizontal forces
*Canine guidance is also easier to manage restoratively than group function
* However, if the patient’s canines are not positioned correctly for canine guidance, group function (involving the canines and premolars) is the most favourable alternative
It is necessary to understand the concepts that influence the function and health of the masticatory system in order to prevent, minimise or eliminate any breakdown or trauma to the TMJs or teeth.
Patient adaptability
There are various factors that play a role in the adaptive capability of a patient with regards to changes in occlusion. Factors such as the central nervous system and the
mechanoreceptor
A mechanoreceptor, also called mechanoceptor, is a sensory receptor that responds to mechanical pressure or distortion. Mechanoreceptors are innervated by sensory neurons that convert mechanical pressure into electrical signals that, in animals, ...
s in the
periodontium
The periodontium is the specialized tissues that both surround and support the teeth, maintaining them in the maxillary and mandibular bones. The word comes from the Greek terms περί ''peri''-, meaning "around" and -''odont'', meaning "tooth". ...
,
mucosa
A mucous membrane or mucosa is a membrane that lines various cavities in the body of an organism and covers the surface of internal organs. It consists of one or more layers of epithelial cells overlying a layer of loose connective tissue. It is ...
and
dentition
Dentition pertains to the development of teeth and their arrangement in the mouth. In particular, it is the characteristic arrangement, kind, and number of teeth in a given species at a given age. That is, the number, type, and morpho-physiolo ...
are all of importance here. It is in fact, the
somatosensory
In physiology, the somatosensory system is the network of neural structures in the brain and body that produce the perception of touch (haptic perception), as well as temperature (thermoception), body position (proprioception), and pain. It is ...
input from these sources that determines whether an individual is able to adapt to changes in the occlusion, opposed to the occlusal scheme itself.
Failure of adaptation to minor changes in the occlusion can occur, although rare. It is thought that patients who are increasingly vigilant to any changes in the oral environment are less likely to adapt to any occlusal changes.
Psychological
Psychology is the scientific study of mind and behavior. Psychology includes the study of conscious and unconscious phenomena, including feelings and thoughts. It is an academic discipline of immense scope, crossing the boundaries between t ...
and
emotional stress
In psychology, stress is a feeling of emotional strain and pressure. Stress is a type of psychological pain. Small amounts of stress may be beneficial, as it can improve athletic performance, motivation and reaction to the environment. Excess ...
can also contribute to the patient's ability to adapt as these factors have an impact on the
central nervous system
The central nervous system (CNS) is the part of the nervous system consisting primarily of the brain and spinal cord. The CNS is so named because the brain integrates the received information and coordinates and influences the activity of all par ...
.
Occlusal examination
In individuals with unexplained pain, fracture, drifting, mobility and tooth wear, a full occlusal examination is vital. Similarly when complex restorative work is planned it is also essential to identify whether any occlusal changes are required prior to the provision of definitive restoration
In some people even minor discrepancies in the occlusion can lead to symptoms involving the TMJ or acute orofacial pain so it is important to identify and eradicate this cause.
![Occlusal Examination Instruments](https://upload.wikimedia.org/wikipedia/commons/5/59/Occlusal_Examination_Instruments.jpg)
Instruments Required
* Miller’s forceps
* Articulating paper
* Shimstock
* Mosquito forceps
* Mirror
* Dental probe
* Willis gauge
The examination should be carried out using a systematic approach whilst assessing the following:
* Facial appearance
* Musculature
* TMJ
* Each arch individually
* Intercuspal Position (ICP)
* Retruded Contact Position (RCP)
* RCP-ICP slide
* Lateral excursions
* Protrusion
* OVD
Extra-oral examination
1) Facial Appearance
The facial symmetry of the patient should be observed.
The skeletal relationship of the patient should then be identified and noted.
* Class I: The maxilla and mandible are in harmony and coincide
* Class II: The maxilla lies anterior to the mandible and is retrognathic
* Class III: The maxilla lies posterior to the mandible and is prognathic
The facial height of the patient should be considered and it should be noted where there may have been a loss.
2) Muscles
Begin by simply palpating the muscles concerned with the occlusion of the teeth. These muscles include the muscles of mastication and other muscles within the head and neck area, such as the supra-hyoid muscles. It is best to palpate the muscles simultaneously and bilaterally.
The temporalis, masseter, medial and lateral pterygoids, geniohyoid, mylohyoid and digastric muscles alongside the trapezius, posterior cervical muscles, occipitalis muscle and the sternocleidomastoid should all be checked for any signs of wasting or tenderness. Temporomandibular dysfunction commonly presents with muscular tenderness,
but pain or palpable soreness associated with the muscles can also be linked to parafunctional activity.
3) TMJ
TMJ disorders can be detected through occlusal examination. Ask the patient to open and close whilst placing two fingers over the space of the TMJ. Opening of less than 35mm in the mandible is considered to be restricted and such restriction may be associated with intra-capsular changes within the joint.
Following this, ask the patient to move their jaw to the right and following this, to the left. Note any clicking, crepitus, pain or deviation.
Intra-oral examination
4) Maxillary / Mandibular Arch
Assess each arch and identify whether there are any signs of occlusal disharmony, overloading, tooth migration, wear, craze lines, cracking or mobility (not due to periodontal causes).
Abfraction, faceting and possible vertical enamel fracture lesions should also be noted if present.
5) Contacts in ICP
Begin by assessing the incisor and molar relationship as described above. Similarly examine the overbite and overjet. An overbite of 3-5mm
and an overjet of 2-3mms are considered to be within the range of normal.
To look at the ICP, articulating paper should be placed on the occlusal surface and the patient asked to bite together, which will mark their occlusal contacts. It is best to check these whilst the teeth are dry.
* During ICP, most opposing teeth should be contacting
* Close examination of these contacts marked by the articulating paper help to identify the nature of the tooth contacts
* Good stable contacts often appear as small and not very prominent markings when articulating paper is used and there are multiple contacts on each tooth
* Broad and rubbing contacts identified in ICP may be associated with disturbances in function and may indicate occlusal instability
* These contacts can be verified using Shimstock (a 12.5μm thick mylar strip) and the stability of the contacts can be checked
* The operator should pull the Shimstock through the teeth, whilst the patient is biting together
* This should be carried out for each set of teeth and will highlight if there is adequate contact to hold the Shimstock
* This material is appropriate as it is thinner and will eliminate any false contacts that may occur with even thin articulating papers that are roughly 20μm thick
* One is also able to pull shim stock through when patients are biting together unlike other articulating paper, which will tear
6) RCP
The patient may be guided into CR using one of the follow methods;
* ''Bimanual manipulation''- manipulating the patient's condyles so they are in CR
* The operator should lightly rest their fingers along the inferior border of the mandible and their thumbs should lie lightly on the anterior aspect of the chin
* When the patient is relaxed place light downward pressure on the chin and light upward pressure under the angle of the mandible
* Deprogramme the jaw by guiding the opening and closing of the jaw and once the patient is relaxed, ask them to close gently and stop when they feel teeth first contacting
* ''Chin point guidance''- one hand is used to apply pressure to the chin guiding the chin posteriorly with some force
In some patients it may be difficult to guide the mandible into CR, for example in those with muscle tension, muscle splinting, occlusal disharmony or parafunctional habit. For these patients a Lucia Jig or deprogramming appliance can be constructed at chair-side.
Mark RCP tooth contacts using articulating paper, note the teeth which are contacting and identify whether this RCP position is causing problems related to the occlusion. For example if there is a heavy contact or interference in RCP this may be the cause of occlusal disturbance. It is important to be able to guide the patient into RCP, as a registration may need to be taken in this position particularly if the occlusion is being reorganised, the OVD is being changed or even just for diagnostic and treatment planning purposes.
7) RCP-ICP Slide
The patient should be supine and relaxed. They should be placed into RCP by the operator and then asked to bite together “normally”, this is moving them from RCP into their position of maximum intercuspation (ICP). Ask the patient to feel the slide and identify whether this is small or large.
The slide should be smooth and the direction should be recorded.
The operator should evaluate from both the side of the patient and the front of the patient, how far the mandible travels both forward and laterally (however this is difficult and it may be easier to observe by mounting casts onto an articulator). This can be done by observing the maxillary and mandibular incisors during the slide.
The RCP-ICP slide for most dentate patients tends to be roughly 1–2 mm in an anterior and upward direction.
A deflective RCP-ICP slide, can have some relation to an anterior thrust. An
anterior thrust, which is likely to be associated with the anterior teeth or other teeth involved in guidance such as canine teeth, often causes the teeth to exhibit
fremitus
Fremitus is a vibration transmitted through the body. In common medical usage, it usually refers to assessment of the lungs by either the vibration intensity felt on the chest wall (''tactile fremitus'') and/or heard by a stethoscope on the chest ...
.
8) Protrusive Movements
The patient is asked to move their mandible forward from ICP. This is commonly around a distance of 8-10mm and would normally be until the lower incisors slide anterior to the incisal edges of the maxillary anteriors. Observe the contacts during this movement. Mark the contacts using coloured articulating paper alongside the ICP contacts, which should be in a different colour - any teeth providing guidance and any interferences should be noted.
9) Lateral Excursions
The patient is also asked to move their lower jaw to one side. Lateral movements should be measured and measurements of 12mm are thought to be normal.
Both working side and non-working side should be observed during this movement. Record any teeth that are providing guidance during this movement and any interferences that are present (and the location of these). Smooth and unbroken contacts should be identified when these excursive movements are recorded
10) OVD
If occlusal wear can be seen, a Willis gauge is used to measure the occlusal-vertical dimension and the resting vertical dimension of an individual.
Take a measurement by placing two reference points on the patients face, one under the nose (usually the columella) and one under the chin. Take one measurement whilst the patient is resting (teeth should not be contacting) and one with the patient biting together i.e. in ICP and take this measurement away from the resting measurement to give the freeway space. The normal freeway space is usually 2-4mm.
Patients with considerable tooth wear may have lost occlusal vertical dimension (OVD). When restoring the dentition, it is important to be aware of the exact OVD the patient has and by how much you may be increasing this. Patient’s may not be able to adapt to a large increase in OVD and therefore this may have to be done in phases.
Summary
Clinical applications of occlusion
Occlusion is a fundamental concept in dentistry yet it is commonly overlooked as it's perceived as being not important or too difficult to teach and understand. Clinicians should have a sound understanding of the principles regarding occlusal harmony in order to be able to recognise and treat common problems associated with occlusal disharmony. Some of the advantages associated with a working knowledge of these include:
* Improved patient comfort: for example, some people experience pain or sensitivity after the placement of a new restoration due to occlusal overload or an interference which possibly could be avoided should the practitioner consider these at time of placement
* Increased occlusal stability: teeth are less likely to drift , occlusal contacts are likely to be maintained etc.
* Increased success of restorations: excessive
wear
Wear is the damaging, gradual removal or deformation of material at solid surfaces. Causes of wear can be mechanical (e.g., erosion) or chemical (e.g., corrosion). The study of wear and related processes is referred to as tribology.
Wear in m ...
, fractures,
cracks are less commonly observed where there is an ideal occlusion
* Better aesthetics: when the anterior teeth conform to ideal occlusal function and stability, the best aesthetic result is achieved
Simple occlusal adjustment
Involves simply grinding down involved cusps or restorations and may be indicated after careful examination when:
* Overloading of occlusal forces has resulted in pain, tooth fracture or mobility
* Interocclusal space is required for restoration provision (e.g. in the case of an
overerupted tooth where occlusal plane corrections required)
Complex occlusal adjustment or reorganisation
May be required in more severe circumstances and some examples of these include:
* Elimination of an
anterior thrust causing pain, wear, drifting or mobility
* To provide space for anterior restorations
* Management of
bruxism
Bruxism is excessive teeth grinding or jaw clenching. It is an oral parafunctional activity; i.e., it is unrelated to normal function such as eating or talking. Bruxism is a common behavior; reports of prevalence range from 8% to 31% in the gene ...
(however, uncommon)
* The elimination of a
temporomandibular joint disorder
Temporomandibular joint dysfunction (TMD, TMJD) is an umbrella term covering pain and dysfunction of the muscles of mastication (the muscles that move the jaw) and the temporomandibular joints (the joints which connect the mandible to the skull ...
(however, as previously mentioned, occlusion is rarely an aetiological factor for TMD so there should be significant evidence to support this before alteration of the occlusion is pursued)
Achieving a satisfactory occlusal reorganisation involves choosing a desired jaw relationship (either conforming to existing ICP or producing a new ICP coincident with CR), deciding on the intercuspal contacts (removing deflective contacts and adjusting shapes/inclines of teeth), adjusting excursive contacts (removing interferences) and aiming for a mutually protected occlusion.
This is an extremely complex process and entails a clinical occlusal examination as described above, along with detailed examination of mounted study casts and
diagnostic wax-ups.
Mounted study casts
It is common practice to mount mandibular and maxillary casts (
impressions are made of the teeth and poured in dental stone) in an articulator in ICP when constructing restorations that conform to the patient's existing occlusion. Casts mounted on an
articulator
An articulator is a mechanical hinged device used in dentistry to which plaster casts of the maxillary (upper) and mandibular (lower) jaw are fixed, reproducing some or all the movements of the mandible in relation to the maxilla. The human maxi ...
in ICP are useful for diagnostic purposes or simple restorations, but where more extensive treatment is planned it is necessary to consider occlusal contacts relative to CR e.g. RCP -> ICP slide. Other situations a CR registration may be more appropriate than ICP include where there are plans to reorganise or adjust the existing occlusion (including changes to the occlusal vertical dimension).
In these circumstances, in order to accurately stimulate mandibular movement around CR (particularly opening and closing of the mouth), using a
facebow
Orthodontic headgear is a type of orthodontic appliance typically attached to the patient's head with a strap or number of straps around the patient’s head or neck. From this, a force is transferred to the mouth/jaw(s) of the subject.
Headgear ...
transfer, the maxillary cast should be mounted in a
semi-adjustable articulator and then the mandibular cast should be mounted using a CR registration. The patient's new occlusion is then arranged so that the new ICP occurs when patient is in CR.
Diagnostic wax-ups
Wax-ups are indicated where changes to the occlusion or aesthetics are planned. Diagnostic wax-ups are when changes are made to the shapes of the teeth by methodically adding wax to the articulated stone casts representing the patient's teeth. This can be done in order to demonstrate to the patient what the planned restorations will look like, but can also be invaluable when simulating different occlusal schemes, studying the functional occlusion as well as providing temporary coverage whilst the restoration is being constructed by the lab through use of a matrix. Once an established plan has been constructed using the wax-ups, these can be used as a tool to guide the desired outcome in the mouth and provide a useful communication tool with both the
dental laboratory
Dental laboratories manufacture or customize a variety of products to assist in the provision of oral health care by a licensed dentist. These products include crowns, bridges, dentures and other dental products. Dental lab technicians follow a pr ...
and the patient.
See also
*
Malocclusion
In orthodontics, a malocclusion is a misalignment or incorrect relation between the teeth of the upper and lower dental arches when they approach each other as the jaws close. The English-language term dates from 1864; Edward Angle (1855-1930), ...
*
Maximum intercuspation
In dentistry, maximum intercuspation refers to the occlusal position of the mandible in which the cusps of the teeth of both arches fully interpose themselves with the cusps of the teeth of the opposing arch. This position used to be referred to ...
*
Mutually protected occlusion In dentistry, a mutually protected occlusion is an occlusal scheme in which the anterior teeth protect the posterior teeth, and vice versa.
The anterior teeth protect the posterior teeth by providing for a plane of guidance during excursions, thu ...
*
Occlusal trauma
Occlusal trauma is the damage to teeth when an excessive force is acted upon them and they do not align properly.Bibb, CA: Occlusal Evaluation and Therapy in the Management of Periodontal Disease. In Newman, MG; Takei, HH; Carranza, FA; editors: ...
References
External links
What is an ideal bite? Orthodontics Australia.
{{Authority control
Dentistry
Teeth