Nanoionic Supercapacitors
   HOME

TheInfoList



OR:

Nanoionics is the study and application of phenomena, properties, effects, methods and mechanisms of processes connected with fast ion transport (FIT) in all-solid-state nanoscale systems. The topics of interest include fundamental properties of oxide ceramics at nanometer length scales, and fast ion conductor ( advanced superionic conductor)/electronic conductor heterostructures. Potential applications are in electrochemical devices (
electrical double layer A double layer (DL, also called an electrical double layer, EDL) is a structure that appears on the surface of an object when it is exposed to a fluid. The object might be a solid particle, a gas bubble, a liquid droplet, or a porous body. The D ...
devices) for conversion and storage of energy, charge and information. The term and conception of nanoionics (as a new branch of science) were first introduced by A.L. Despotuli and V.I. Nikolaichik (Institute of Microelectronics Technology and High Purity Materials, Russian Academy of Sciences, Chernogolovka) in January 1992. A multidisciplinary scientific and industrial field of
solid state ionics Solid-state ionics is the study of ionic-electronic mixed conductor and fully ionic conductors ( solid electrolytes) and their uses. Some materials that fall into this category include inorganic crystalline and polycrystalline solids, ceramics, g ...
, dealing with ionic transport phenomena in solids, considers Nanoionics as its new division. Nanoionics tries to describe, for example, diffusion&reactions, in terms which make sense only at a nanoscale, e.g., in terms of non-uniform (at a nanoscale) potential landscape. There are two classes of solid state ionic
nanosystems ThTechnology Roadmap for Productive Nanosystemsdefines "productive nanosystems" as functional nanoscale systems that make atomically-specified structures and devices under programmatic control, i.e., they perform atomically precise manufacturi ...
and two fundamentally different nanoionics: (I) nanosystems based on solids with low ionic conductivity, and (II) nanosystems based on advanced superionic conductors (e.g. alpha– AgI, rubidium silver iodide–family). Nanoionics-I and nanoionics-II differ from each other in the design of interfaces. The role of boundaries in nanoionics-I is the creation of conditions for high concentrations of charged defects (vacancies and interstitials) in a disordered space-charge layer. But in nanoionics-II, it is necessary to conserve the original highly ionic conductive crystal structures of advanced superionic conductors at ordered (lattice-matched) heteroboundaries. Nanoionic-I can significantly enhance (up to ~108 times) the 2D-like ion conductivity in nanostructured materials with structural coherence, but it is remaining ~103 times smaller relatively to 3D ionic conductivity of advanced superionic conductors. The classical theory of diffusion and migration in solids is based on the notion of a diffusion coefficient, activation energy and electrochemical potential. This means that accepted is the picture of a hopping ion transport in the potential landscape where all barriers are of the same height (uniform potential relief). In spite of the obvious difference of objects of solid state ionics and nanoionics-I, -II, the true new problem of fast ion transport and charge/
energy storage Energy storage is the capture of energy produced at one time for use at a later time to reduce imbalances between energy demand and energy production. A device that stores energy is generally called an accumulator or battery. Energy comes in ...
(or transformation) for these objects ( fast ion conductors) has a special common basis: non-uniform potential landscape on nanoscale (for example ) which determines the character of the mobile ion subsystem response to an impulse or harmonic external influence, e.g. a weak influence in Dielectric spectroscopy (impedance spectroscopy).


Characteristics

Being a branch of nanoscience and
nanotechnology Nanotechnology, also shortened to nanotech, is the use of matter on an atomic, molecular, and supramolecular scale for industrial purposes. The earliest, widespread description of nanotechnology referred to the particular technological goal o ...
, nanoionics is unambiguously defined by its own objects (nanostructures with FIT), subject matter (properties, phenomena, effects, mechanisms of processes, and applications connected with FIT at nano-scale), method (interface design in nanosystems of superionic conductors), and criterion (R/L ~1, where R is the length scale of device structures, and L is the characteristic length on which the properties, characteristics, and other parameters connected with FIT change drastically). The
International Technology Roadmap for Semiconductors The International Technology Roadmap for Semiconductors (ITRS) is a set of documents produced by a group of semiconductor industry experts. These experts are representative of the sponsoring organisations which include the Semiconductor Industry A ...
(ITRS) relates nanoionics-based resistive switching memories to the category of "emerging research devices" ("ionic memory"). The area of close intersection of nanoelectronics and nanoionics had been called nanoelionics (1996). Now, the vision of future nanoelectronics constrained solely by fundamental ultimate limits is being formed in advanced researches. The ultimate physical limits to computation are very far beyond the currently attained (1010 cm−2, 1010 Hz) region. What kind of logic switches might be used at the near nm- and sub-nm peta-scale integration? The question was the subject matter already in, where the term "nanoelectronics" was not used yet. Quantum mechanics constrains electronic distinguishable configurations by the tunneling effect at tera-scale. To overcome 1012 cm−2 bit density limit, atomic and ion configurations with a characteristic dimension of L <2 nm should be used in the information domain and materials with an effective mass of information carriers m* considerably larger than electronic ones are required: m* =13 me at L =1 nm, m* =53 me (L =0,5 nm) and m* =336 me (L =0,2 nm). Future short-sized devices may be nanoionic, i.e. based on the fast ion transport at the nanoscale, as it was first stated in.


Examples

The examples of
nanoionic device Nanoionics is the study and application of phenomena, properties, effects, methods and mechanisms of processes connected with fast ion transport (FIT) in all-solid-state nanoscale systems. The topics of interest include fundamental properties of ...
s are all-solid-state
supercapacitor A supercapacitor (SC), also called an ultracapacitor, is a high-capacity capacitor, with a capacitance value much higher than other capacitors but with lower voltage limits. It bridges the gap between electrolytic capacitors and rechargeable ba ...
s with fast ion transport at the functional heterojunctions (
nanoionic supercapacitor Nanoionics is the study and application of phenomena, properties, effects, methods and mechanisms of processes connected with fast ion transport (FIT) in all-solid-state nanoscale systems. The topics of interest include fundamental properties of ...
s), lithium batteries and fuel cells with nanostructured electrodes, nano-switches with quantized conductivity on the basis of fast ion conductors (see also
memristors A memristor (; a portmanteau of ''memory resistor'') is a non-linear two-terminal electrical component relating electric charge and magnetic flux linkage. It was described and named in 1971 by Leon Chua, completing a theoretical quartet of fu ...
and
programmable metallization cell The programmable metallization cell, or PMC, is a non-volatile computer memory developed at Arizona State University. PMC, a technology developed to replace the widely used flash memory, providing a combination of longer lifetimes, lower power, ...
). These are well compatible with sub-voltage and
deep-sub-voltage nanoelectronics Deep-sub-voltage nanoelectronics are integrated circuits (ICs) operating near theoretical limits of energy consumption per unit of processing. These devices are intended to address the needs of applications such as wireless sensor networks which ha ...
and could find wide applications, for example in autonomous
micro power source Micro power sources and nano power sources are units of RFID, MEMS, microsystems and nanosystems ThTechnology Roadmap for Productive Nanosystemsdefines "productive nanosystems" as functional nanoscale systems that make atomically-specified str ...
s,
RFID Radio-frequency identification (RFID) uses electromagnetic fields to automatically identify and track tags attached to objects. An RFID system consists of a tiny radio transponder, a radio receiver and transmitter. When triggered by an electromag ...
, MEMS,
smartdust Smartdust is a system of many tiny microelectromechanical systems (MEMS) such as sensors, robots, or other devices, that can detect, for example, light, temperature, vibration, magnetism, or chemicals. They are usually operated on a computer netwo ...
,
nanomorphic cell The nanomorphic cell is a conception of an atomic-level, integrated, self-sustaining microsystem with five main functions: internal energy supply, sensing, actuation, computation and communication. Atomic level integration provides the ultimate func ...
, other micro- and
nanosystems ThTechnology Roadmap for Productive Nanosystemsdefines "productive nanosystems" as functional nanoscale systems that make atomically-specified structures and devices under programmatic control, i.e., they perform atomically precise manufacturi ...
, or reconfigurable memory cell arrays. An important case of fast ionic conduction in solid states is that in surface space-charge layer of ionic crystals. Such conduction was first predicted by Kurt Lehovec. A significant role of boundary conditions with respect to ionic conductivity was first experimentally discovered by C.C. Liang who found an anomalously high conduction in the LiI-Al2O3 two-phase system. Because a space-charge layer with specific properties has nanometer thickness, the effect is directly related to nanoionics (nanoionics-I). The Lehovec effect has become the basis for the creation of a multitude of nanostructured fast ion conductors which are used in modern portable lithium batteries and
fuel cell A fuel cell is an electrochemical cell that converts the chemical energy of a fuel (often hydrogen) and an oxidizing agent (often oxygen) into electricity through a pair of redox reactions. Fuel cells are different from most batteries in requ ...
s. In 2012, a 1D structure-dynamic approach was developed in nanoionics for detailed description of the space charge formation and relaxation processes in irregular potential relief (direct problem) and interpretation of characteristics of nanosystems with fast ion transport (inverse problem), as example, for the description of a collective phenomenon: coupled ion transport and dielectric-polarization processes which lead to A. K. Jonscher's "universal" dynamic response.


See also

*
Programmable metallization cell The programmable metallization cell, or PMC, is a non-volatile computer memory developed at Arizona State University. PMC, a technology developed to replace the widely used flash memory, providing a combination of longer lifetimes, lower power, ...


References

{{Reflist, 30em Nanoelectronics