A nanoinverter, also referred to as a nano inverter or solar nano inverter, converts

direct current Direct current (DC) is one-directional flow of electric charge. An electrochemical cell is a prime example of DC power. Direct current may flow through a conductor such as a wire, but can also flow through semiconductors, insulators, or eve ...

(DC) from a single

solar cell A solar cell, or photovoltaic cell, is an electronic device that converts the energy of light directly into electricity by the photovoltaic effect, which is a physical and chemical phenomenon.

or small solar panel to

alternating current Alternating current (AC) is an electric current which periodically reverses direction and changes its magnitude continuously with time in contrast to direct current (DC) which flows only in one direction. Alternating current is the form in whic ...

(AC).

Advantages

Nanoinverters have several advantages over microinverters (which are connected to larger than 100-watt solar panels). The main advantage is that, even small amounts of shading, debris or snow lines in any one solar cell, or a smaller panel failure, does not disproportionately reduce the output of an entire larger panel. Each nanoinverter obtains optimum power by performing

maximum power point tracking Maximum power point tracking (MPPT) or sometimes just power point tracking (PPT), is a technique used with variable power sources to maximize energy extraction as conditions vary. The technique is most commonly used with photovoltaic (PV) solar s ...

for its connected panel.

Description

Building Integrated Photo Voltaics

BIPV modules produce

power from range 10 watts to 100 watts. Integrated circuit-based AC nanoinverter on each module is reported to increase harvest rate by 30% and substantially decrease installation constraints.

Solar Cell

DC nanoconverter-on-chip is capable of harvesting from microwatts power and as low as 80mV (0.08V) voltage. Harvest rate has been reported to improve 30%-70% with an integrated

MPPT Maximum power point tracking (MPPT) or sometimes just power point tracking (PPT), is a technique used with variable power sources to maximize energy extraction as conditions vary. The technique is most commonly used with photovoltaic (PV) solar sy ...

and DC-DC booster.Ultra Low Power Boost Converter with Battery Management for Energy Harvester App
/ref>

References

External links

Inverter Manufacturer
{{DEFAULTSORT:Nanoinverter Inverters Photovoltaics