NSAP
   HOME

TheInfoList



OR:

A Network Service Access Point address (NSAP address), defined in ISO/IEC 8348, is an identifying label for a
Service Access Point A Service Access Point (SAP) is an identifying label for network endpoints used in Open Systems Interconnection (OSI) networking. The SAP is a conceptual location at which one OSI layer can request the services of another OSI layer. As an example, ...
(SAP) used in
OSI OSI may refer to: Places * Osijek Airport (IATA code: OSI), an airport in Croatia * Ősi, a village in Veszprém county, Hungary * Oši, an archaeological site in Semigallia, Latvia * Osi, a village in Ido-Osi, Ekiti State, Nigeria * Osi, Ekiti ...
networking. These are roughly comparable to
IP address An Internet Protocol address (IP address) is a numerical label such as that is connected to a computer network that uses the Internet Protocol for communication.. Updated by . An IP address serves two main functions: network interface ident ...
es used in the
Internet Protocol The Internet Protocol (IP) is the network layer communications protocol in the Internet protocol suite for relaying datagrams across network boundaries. Its routing function enables internetworking, and essentially establishes the Internet. IP h ...
; they can specify a piece of equipment connected to an Asynchronous Transfer Mode (ATM) network. A specific stream, analogous to a TCP/IP
port A port is a maritime facility comprising one or more wharves or loading areas, where ships load and discharge cargo and passengers. Although usually situated on a sea coast or estuary, ports can also be found far inland, such as Ham ...
or
socket Socket may refer to: Mechanics * Socket wrench, a type of wrench that uses separate, removable sockets to fit different sizes of nuts and bolts * Socket head screw, a screw (or bolt) with a cylindrical head containing a socket into which the hexag ...
, is specified by using a Transport Service Access Point ( TSAP). ATM can also use a Presentation (PSAP) and Session (SSAP) Access Point, but these may also be unspecified; this is up to the application.


Allocation and scope

NSAP addresses are allocated by the
International Organization for Standardization The International Organization for Standardization (ISO ) is an international standard development organization composed of representatives from the national standards organizations of member countries. Membership requirements are given in Ar ...
(ISO), through a system of delegated authorities, which are generally national standards organizations. One of the schemes to generate NSAPs uses E.164 which is the addressing format describing telephone numbers. NSAP addresses do not specify where a network terminal is located.
Routing Routing is the process of selecting a path for traffic in a network or between or across multiple networks. Broadly, routing is performed in many types of networks, including circuit-switched networks, such as the public switched telephone netw ...
equipment must translate NSAP addresses to SNPAs (SubNetwork Point of Attachment) to route OSI packets; VCI (virtual circuit identifier) numbers are an example of a datalink layer SNPAs in ATM; when OSI packets are sent encapsulated in IP packets the IP address is considered an SNPA. Currently SDH/SONET networks are a major part of the network infrastructure and NSAPs are used extensively. They are usually assigned by the Network Management/NOC personnel and agreed upon within an organization to be unique (to that organization and based on geographical location using country code telephone prefixes) and are required before any operational connectivity is established at the commissioning stage. NSAP addresses are used in the following OSI-based network technologies: * ATM switched virtual circuit networks *
X.25 X.25 is an ITU-T standard protocol suite for packet-switched data communication in wide area networks (WAN). It was originally defined by the International Telegraph and Telephone Consultative Committee (CCITT, now ITU-T) in a series of drafts a ...
(see
ITU-T The ITU Telecommunication Standardization Sector (ITU-T) is one of the three sectors (divisions or units) of the International Telecommunication Union (ITU). It is responsible for coordinating standards for telecommunications and Information Commu ...
X.121 X.121 is the ITU-T address format of the X.25 protocol suite used as part of call setup to establish a switched virtual circuit between Public Data Networks (PDNs), connecting two network user addresses (NUAs). It consists of a maximum of fourteen ...
for addressing in public data networks) * Frame Relay * IS-IS *
SDH SDH may refer to: Science, medicine and technology * Serine dehydratase, an enzyme * L-sorbose 1-dehydrogenase, an enzyme * Succinate dehydrogenase, an enzyme * Shubnikov–de Haas effect * Social Determinants of Health, economic and social condi ...
& SONET networks. NSAP-style addresses are used in the IS-IS routing protocol.


NSEL

The NSEL (Network-Selector) is a field in the NSAP address that identifies the
network layer In the seven-layer OSI model of computer networking, the network layer is layer 3. The network layer is responsible for packet forwarding including routing through intermediate routers. Functions The network layer provides the means of transfe ...
service to which a packet should be sent. This part of the address for a router will always be 0x00. In the IS-IS routing protocol, the field is sometimes referred to as the SEL field.


See also

*
Address Resolution Protocol The Address Resolution Protocol (ARP) is a communication protocol used for discovering the link layer address, such as a MAC address, associated with a given internet layer address, typically an IPv4 address. This mapping is a critical function ...
* Another Definition a
Techtarget


References

OSI protocols Identifiers Network addressing {{network-software-stub