NASA Design Reference Mission 3

NASA Design Reference Mission 3.0 was a NASA study for a human space mission to the planet Mars in the 1990s. It was a plan for a human exploration architecture for Mars, and was released in 1998 as an addendum to the early design plans released in 1994. The plan is for a series of multiple launches to send various space transpiration, surface exploration hardware, and human crew to Mars, and to return the crew to Earth in the early 21st century. Various technologies are explored to launch the payloads into space, to send them to Mars, and to reduce overall weight of the mission by various technologies or techniques including nuclear, solar, aerobraking, and in-situ resource use.

Overview

The study was performed by the NASA Mars Exploration Team at the NASA's Johnson Space Center (JSC) in the 1990s. Personnel representing several NASA field centers formulated a "Reference Mission" addressing human exploration of Mars. The plan describes the first human missions to Mars with concept of operations and technologies to be used as a first cut at an architecture. The architecture for the Mars Reference Mission builds on previous work, principally on the work of the Synthesis Group (1991) and Robert Zubrin's (1991) concepts for the use of propellants derived from the Martian atmosphere. The primary purpose of the Reference Mission was to stimulate further thought and development of alternative approaches which can improve effectiveness, reduce risks, and reduce cost. Improvements can be made at several levels; for example, in the architectural, mission, and system levels.

The report of the Reference Mission Version 3.0 states:

From the work of the original Reference Mission (Version 1.0), the strategy for the human exploration of Mars has evolved from its original form to one of reduced system mass, use of a smaller, more reasonable launch vehicle, and use of more current technology. The steps which have been taken by the Exploration Team are motivated by the need to reduce the mass of the payload delivery flights, as well as the overall mission cost, without introducing additional mission risk. By eliminating the need for a large heavy-lift launch vehicle and deleting the redundant habitat delivery flight in Version 3.0, two launches from the Earth were eliminated. The net result is a current Version 3.0 Reference Mission which requires an injected mass of approximately one-half that of the 1993/94 Reference Mission.

The purpose of the Reference plan, including the 3.0 update is to provide a template for a variety of Mars mission planning and technology purposes, and also to stimulate thought and further ideas for Mars missions in the "exploration community and beyond".

Aspects

List:

*Cargo Vehicles
*Piloted Vehicles
*Mars Surface Lander
*Inflatable Surface Habitat
*Magnum Launch Vehicle
*Propulsion studies including
**Nuclear Thermal Rocket
**Solar Electric
*Earth Return Vehicle
*Aerobrake at Mars
*In-situ resource
*Misc. Other items

Mission items

The DRM 3.0 covered or touched upon a wide variety of institutions, vehicle, and mission concepts which are further explored or analyzed.

Examples:
*Evolved Expendable Launch Vehicle (EELV)
*Earth Entry Vehicle
*EVA Mobility Unit
*Electric Propulsion Module
*Earth Return Vehicle
* Extra Vehicular Activity
*Mars Habitat
*Heavy Lift Launch Vehicle
*Initial Mass in Low Earth Orbit
*In-Situ Resource Utilization
*Liquid Fly Back Booster
*Life Support System
*Mars Ascent Vehicle
*Mars Transfer Vehicle
*Nuclear Thermal Propulsion
*Nuclear Thermal Rocket
*Pressurized Control Research Vehicle
*Power Management and Distribution
*Photovoltaic Array
*Reaction Control System
* Shuttle Derived Vehicle
*Solar Electric Propulsion
*Space Transportation System
*Transit Habitat
*Thermal Protection System

;Institutions
*Ames Research Center
*Marshall Space Flight Center
*Jet Propulsion Laboratory
*Johnson Space Center
*Kennedy Space Center
*Langley Research Center
*Lewis Research Center (later renamed Glenn Research Center)

Mission plan

Info graphic highlight a possible sequence of launches to Mars and overall design. On the left is a sequence of launches that would send mission items to Mars and the right, it shows how they are utilized. A major component that was sent is the Earth return vehicle, which would use aerobraking to get into Mars orbit. Next, a cargo Mars lander would get important hardware to the surface of Mars which would also use aerobraking. Finally, the crew would land on the surface and use the pre-positioned hardware to conduct the mission and then return to Earth. This plan would use the in-situ production of fuel for Mars ascent stage of returning crew. Both aerocapture and in-situ resource production were methods to reduce overall launch weight of mission plan.

See also

*Exploration of Mars
*Mars Direct
* Marsbook
*List of crewed Mars mission plans

References

External links

NASA Design Reference Mission

JSC Exploration Site
*[https://web.archive.org/web/20070617120619/http://ares.jsc.nasa.gov/HumanExplore/Exploration/EXLibrary/docs/MarsRef/addendum/index.htm Addendum (Update) to Human Exploration of Mars: The Reference Mission of the NASA Mars Exploration Study Team, 1998, NASA JSC Exploration Office (Mars Reference Mission - DRM 3.0)]
A Mission Design for International Manned Mars Mission, From the 1991 International Space University (ISU) Design Project (Mendell, Wendell)Mars Exploration Strategies: A Reference Program and Comparison of Alternative ArchitecturesNASA Report, Mars Design Reference Mission 3"Reference Mission Version 3.0 Addendum to the Human Exploration of Mars: The Reference Mission of the NASA Mars Exploration Study Team," Bret G. Drake, editor, NASA Lyndon B. Johnson Space Center
*[https://web.archive.org/web/20061005143754/http://ston.jsc.nasa.gov/collections/TRS/_techrep/TP-2001-209371.pdf NASA TP 2001-209371: The Mars Surface Reference Mission: A Description of Human and Robotic Surface Activities]
Stoffel, Wilhelm, and Wendell Mendell, "An Organizational Model for an International Mars Mission", From the 1991 International Space University (ISU) Design ProjectWeaver, David B., and Michael B. Duke, "Mars Exploration Strategies: A Reference Program and Comparison of Alternative Architectures, Conference Paper AIAA 93-4212, (1993)Weaver, David B., Michael B. Duke, and Barney B. Roberts, "Mars Exploration Strategies: A Reference Design Mission," Conference Paper IAF 93-Q.1.383, (1993)NASA illustrations of DRM (Source: Mars Society)

General Mars exploration

The Mars Society Paper ArchivePDF summary of Mars Society Papers

{{DEFAULTSORT:Nasa Design Reference Mission 3.0
NASA oversight
Human missions to Mars