HOME

TheInfoList



OR:

In magnetohydrodynamics, the magnetic Reynolds number (Rm) is a dimensionless quantity that estimates the relative effects of
advection In the field of physics, engineering, and earth sciences, advection is the transport of a substance or quantity by bulk motion of a fluid. The properties of that substance are carried with it. Generally the majority of the advected substance is a ...
or induction of a magnetic field by the motion of a conducting medium to the magnetic diffusion. It is the magnetic analogue of the
Reynolds number In fluid mechanics, the Reynolds number () is a dimensionless quantity that helps predict fluid flow patterns in different situations by measuring the ratio between inertial and viscous forces. At low Reynolds numbers, flows tend to be domin ...
in
fluid mechanics Fluid mechanics is the branch of physics concerned with the mechanics of fluids (liquids, gases, and plasmas) and the forces on them. It has applications in a wide range of disciplines, including mechanical, aerospace, civil, chemical and bio ...
and is typically defined by: : \mathrm_\mathrm = \frac ~~ \sim \frac where * U is a typical velocity scale of the flow, * L is a typical length scale of the flow, * \eta is the
magnetic diffusivity The magnetic diffusivity is a parameter in plasma physics which appears in the magnetic Reynolds number. It has SI units of m²/s and is defined as:W. Baumjohann and R. A. Treumann, ''Basic Space Plasma Physics'', Imperial College Press, 1997. :\ ...
. The mechanism by which the motion of a conducting fluid generates a magnetic field is the subject of dynamo theory. When the magnetic Reynolds number is very large, however, diffusion and the dynamo are less of a concern, and in this case focus instead often rests on the influence of the magnetic field on the flow.


Derivation

In the theory of magnetohydrodynamics, the magnetic Reynolds number can be derived from the
induction equation The induction equation, one of the magnetohydrodynamic equations, is a partial differential equation that relates the magnetic field and velocity of an electrically conductive fluid such as a plasma. It can be derived from Maxwell's equations and ...
: : \frac = \nabla \times (\mathbf \times \mathbf) + \eta \nabla^2 \mathbf where * \mathbf is the magnetic field, * \mathbf is the fluid velocity, * \eta is the
magnetic diffusivity The magnetic diffusivity is a parameter in plasma physics which appears in the magnetic Reynolds number. It has SI units of m²/s and is defined as:W. Baumjohann and R. A. Treumann, ''Basic Space Plasma Physics'', Imperial College Press, 1997. :\ ...
. The first term on the right hand side accounts for effects from magnetic induction in the plasma and the second term accounts for effects from magnetic diffusion. The relative importance of these two terms can be found by taking their ratio, the magnetic Reynolds number \mathrm_\mathrm. If it is assumed that both terms share the scale length L such that \nabla \sim 1/L and the scale velocity U such that \mathbf \sim U, the induction term can be written as : \nabla \times (\mathbf \times \mathbf) \sim \frac and the diffusion term as : \eta \nabla^2 \mathbf \sim \frac. The ratio of the two terms is therefore : \mathrm_\mathrm = \frac.


General characteristics for large and small Rm

For \mathrm_\mathrm \ll 1, advection is relatively unimportant, and so the magnetic field will tend to relax towards a purely diffusive state, determined by the boundary conditions rather than the flow. For \mathrm_\mathrm \gg 1, diffusion is relatively unimportant on the length scale ''L''. Flux lines of the magnetic field are then advected with the fluid flow, until such time as gradients are concentrated into regions of short enough length scale that diffusion can balance advection.


Range of values

The Sun is huge and has a large \mathrm_\mathrm, of order 106. Dissipative affects are generally small, and there is no difficulty in maintaining a magnetic field against diffusion. For the Earth, \mathrm_\mathrm is estimated to be of order 103 . Dissipation is more significant, but a magnetic field is supported by motion in the liquid iron outer core. There are other bodies in the solar system that have working dynamos, e.g. Jupiter, Saturn, and Mercury, and others that do not, e.g. Mars, Venus and the Moon. The human length scale is very small so that typically \mathrm_\mathrm \ll 1. The generation of magnetic field by the motion of a conducting fluid has been achieved in only a handful of large experiments using mercury or liquid sodium.


Bounds

In situations where permanent magnetisation is not possible, e.g. above the
Curie temperature In physics and materials science, the Curie temperature (''T''C), or Curie point, is the temperature above which certain materials lose their magnet, permanent magnetic properties, which can (in most cases) be replaced by magnetization, induce ...
, to maintain a magnetic field \mathrm_\mathrm must be large enough such that induction outweighs diffusion. It is not the absolute magnitude of velocity that is important for induction, but rather the relative differences and shearing in the flow, which stretch and fold magnetic field lines . A more appropriate form for the magnetic Reynolds number in this case is therefore : \mathrm_\mathrm = \frac where S is a measure of strain. One of the most well known results is due to Backus which states that the minimum \mathrm_\mathrm for generation of a magnetic field by flow in a sphere is such that : \mathrm_\mathrm \ge \pi^2 where L=a is the radius of the sphere and S=e_ is the maximum strain rate. This bound has since been improved by approximately 25% by Proctor. Many studies of the generation of magnetic field by a flow consider the computationally-convenient periodic cube. In this case the minimum is found to be : \mathrm_\mathrm = 2.48 where S is the root-mean-square strain over a scaled domain with sides of length 2\pi. If shearing over small length scales in the cube is ruled out, then \mathrm_\mathrm = 1.73 is the minimum, where U is the root-mean-square value.


Relationship to Reynolds number and Péclet number

The magnetic Reynolds number has a similar form to both the
Péclet number In continuum mechanics, the Péclet number (, after Jean Claude Eugène Péclet) is a class of dimensionless numbers relevant in the study of transport phenomena in a continuum. It is defined to be the ratio of the rate of advection of a physical ...
and the
Reynolds number In fluid mechanics, the Reynolds number () is a dimensionless quantity that helps predict fluid flow patterns in different situations by measuring the ratio between inertial and viscous forces. At low Reynolds numbers, flows tend to be domin ...
. All three can be regarded as giving the ratio of advective to diffusive effects for a particular physical field and have the form of the product of a velocity and a length divided by a diffusivity. While the magnetic Reynolds number is related to the magnetic field in an magnetohydrodynamic flow, the Reynolds number is related to the fluid velocity itself and the Péclet number is related to heat. The dimensionless groups arise in the non-dimensionalization of the respective governing equations: the induction equation, the
Navier–Stokes equations In physics, the Navier–Stokes equations ( ) are partial differential equations which describe the motion of viscous fluid substances, named after French engineer and physicist Claude-Louis Navier and Anglo-Irish physicist and mathematician Geo ...
, and the heat equation.


Relationship to eddy current braking

The dimensionless magnetic Reynolds number, R_m, is also used in cases where there is no physical fluid involved. :R_m = \mu \sigma × (characteristic length) × (characteristic velocity) ::where ::\mu is the magnetic permeability ::\sigma is the electrical conductivity. For R_m < 1 the skin effect is negligible and the eddy current braking torque follows the theoretical curve of an induction motor. For R_m > 30 the skin effect dominates and the braking torque decreases much slower with increasing speed than predicted by the induction motor model.


See also

* Lundquist number * Magnetohydrodynamics *
Reynolds number In fluid mechanics, the Reynolds number () is a dimensionless quantity that helps predict fluid flow patterns in different situations by measuring the ratio between inertial and viscous forces. At low Reynolds numbers, flows tend to be domin ...
*
Péclet number In continuum mechanics, the Péclet number (, after Jean Claude Eugène Péclet) is a class of dimensionless numbers relevant in the study of transport phenomena in a continuum. It is defined to be the ratio of the rate of advection of a physical ...


References


Further reading

* Moffatt, H. Keith, 2000,
Reflections on Magnetohydrodynamics
. In: ''Perspectives in Fluid Dynamics'' () (Ed. G.K. Batchelor, H.K. Moffatt & M.G. Worster) Cambridge University Press, p 347–391. * P. A. Davidson, 2001, ''An Introduction to Magnetohydrodynamics'' (), Cambridge University Press. {{Dimensionless numbers in fluid mechanics Dimensionless numbers of fluid mechanics Fluid dynamics Magnetohydrodynamics