History
Before Mercon: 1942–1987
1942: Motor Oil
In 1942, The Mercury 8 and Lincoln offered cars with an optional "Liquamatic Drive" using a fluid coupling, conventional clutch, and a semi-automatic three-speed transmission. The transmission had an overrunning clutch on the transmission countershaft. The flywheel's fluid coupling used S.A.E 10 motor oil for lubrication. The transmission gearbox used traditional gear oil. This transmission was only produced for a few months before the U.S.A. entered World War-II, production of this transmission was not resumed after the war.1949: GM Hydra-Matic Fluid
In April 1949, Lincoln began offering the General Motors Hydra-Matic 4-speed automatic transmission in their 1950 model year vehicles. This offering continued through the 1954 model year. Lincoln service information calls for "Lincoln Automatic Transmission Fluid". This fluid met the GM Hydra-Matic Drive fluid specifications. This Fluid was First Used in the Following Transmissions: * 1949 Hydra-Matic with an L-9 serial number prefix * 1950 Hydra-Matic with an L-50 serial number prefix * 1951 Hydra-Matic with an L-51 serial number prefix * 1952 Hydra-Matic with an L-52 serial number prefix * 1953 Hydra-Matic with an L-53 serial number prefix * 1954 Hydra-Matic with an L-54 serial number prefix1950 - GM Type "A" Fluid
It is important to understand that every automatic transmission produced by any vehicle manufacturer (Oldsmobile, Cadillac, Buick, Chevrolet, Pontiac, GMC, Ford, Mercury, Lincoln, Chrysler, Dodge, Desoto, Packard, and Studebaker) used GM Type "A" transmission fluids in their transmissions from 1949-1958. In 1950, 11 years after GM released the1959 - Ford Type "A" Fluid
In 1959, Ford released their own Type-A automatic transmission fluid specification (M2C33-A) and stopped using GM fluid specifications for their in-house transmissions. The Ford M2C33-A fluid had GM Type "A" Suffix "A" characteristics. Transmission fluid service life was fairly short, and frequent transmission oil changes were required.1959 - Type "B" Fluid
In 1959, Ford released an updated automatic transmission fluid specification Type-B (M2C33-B). The Ford M2C33-B fluid had GM Type "A" Suffix "A" characteristics. As with the previous specification, transmission fluid service life was fairly short, and frequent transmission oil changes were required.1960 - Type "D" Fluid
In 1960, Ford introduced the Type-D (M2C33-D) specification for service fluid use in 1960 model year vehicles. This fluid specification change provided better oxidation control, anti-wear performance, and higher static capacity capabilities were also included. Oxidation control of the fluid was measured by a new Merc-O-Matic oxidation test. This fluid was first used in the following transmissions: * 1964 C-4 3-Speed automatic transmission * 1966 C-6 3-Speed automatic transmission * 1968 FMX 3-Speed automatic transmission1967 - Type "F" Fluid
In 1967, Ford introduced a new fluid specification, the Type-F fluid (M2C33-F). This fluid provided a high static coefficient of friction which resulted in harsh shifting. The Type-F fluid specification was intended to produce a “lifetime” fluid which would never need to be changed. This is the first of many Ford “lifetime” fluids. The 1974 Ford Car Shop Manual reads "The automatic transmission is filled at the factory with "lifetime" fluid. If it is necessary to add or replace fluid, use only fluids which meet Ford Specification M2C33F.1972 - Type "G" Fluid
In 1972, Ford of Europe introduced a new fluid specification, the Type-G fluid (M2C33-G). This fluid was used through 1981. This fluid was first used in the following transmissions: * Borg-Warner1974 - Type "CJ" Fluid
In September 1974, Ford introduced a new fluid specification, the Type-CJ fluid (M2C138-CJ). This fluid provided smoother shifting and less gear noise by with higher dynamic friction characteristics. The Ford Type-CJ fluid specification also met the GM1981 - Type "H" Fluid
As a result of the 1973 OPEC Oil Embargo and fuel shortages, the U.S. government created the Corporate Average Fuel Economy (CAFE) regulations in 1975. The regulations were to be fully implemented by the 1978 model year. The automotive industry responded by changing to three typically unused transmission technologies: # A 4th gear (overdrive) # A Torque Converter Clutch (TCC) # Front Wheel Drive (FWD). The introduction of the TCC led to customer complaints of a shudder while driving. All vehicle manufacturers made changes to their ATF specifications and the controls of their TCC to try and alleviate the problem. GM released the Dexron-II (D) fluid specification in 1978 and Chrysler released the ATF+2 fluid specification in 1980, and Ford released the Type-H fluid (M2C166-H) specification in June 1981. The Type-H fluid specification provided improved friction characteristics in lock-up torque converters (reducing shudder during application and release). With this new specification, Ford introduced the aluminum beaker oxidation test (ABOT) to replace the older Merc-O-Matic oxidation test. The Ford Type-H fluid was compatible with GM Dexron II(D) specifications. This compatibility may suggest to some that all Ford, Mercon, and Dexron fluids are compatible; this is not correct. Always use the factory recommended fluid for your transmission. (See the Aftermarket Automatic Transmission Fluids section below) This fluid was first used in the following transmissions: * 1982 C-5 (C4 with Torque converter Clutch (TCC)) 3-Speed automatic transmission * 1985 A4LD (C3 with overdrive) 4-Speed automatic transmission * 1986 AXOD 4-Speed automatic transaxle * 1986 Electronic A4LD 4-Speed automatic transmissionMERCON Fluids 1987 - Today
1987 - MERCON
In January 1987, Ford released the original Mercon fluid specification (M2C185-A). Mercon became a trademarked fluid with qualification and licensing of fluids to ensure quality in the marketplace. This original Mercon Specification was backward compatible with the 1981 Ford Type-H fluid and the 1958 GM Type "A" Suffix "A" fluid. NOTICE: This version of Mercon was compatible with GM's Dexron-II(D) and later formulations were compatible with Dexron-III(H); however, Future versions of Mercon (Mercon V, Mercon SP, Mercon LV, Mercon ULV) are not compatible with GM's Dexron-III(H) or any newer version of Dexron (Dexron-VI, Dexron HP, Dexron ULV). This fluid was first used in the following transmissions: * 1989 E4OD (C-6 with overdrive) Ford's first electronic control 4-Speed automatic transmission * 1990 4EAT-G Mazda 4-Speed automatic transmission * 1990 F-4EAT 4-Speed automatic transmission * 1990 AXOD-E 4-Speed automatic transaxle * 1992 AOD-E (Electronic AOD) 4-Speed automatic transmission * 1993 AOD-EW/4R70W 4-Speed automatic transmission * 1994 AX4S 4-Speed automatic transaxle * 1994 CD4E Batavia 4-Speed automatic transmission * 1995 AX4N/4F50N 4-Speed automatic transmission * 1995 4R44E 4-Speed automatic transmission * 1995 4R55E 4-Speed automatic transmission * 1997 5R44 5-Speed automatic transmission (Ford's first 5-speed automatic transmission) * 1997 5R55 5-Speed automatic transmission1996 - MERCON V
In 1996, Ford released the Mercon "V" fluid specification (M2C202-B). Ford Technical Service Bulletin (TSB) 06-14-04 indicates that Mercon "V" is to replace the original Mercon fluid. This fluid was first used in the following transmissions: * 1997 4R70W 4-speed automatic transmission *1998 4R100 4-speed automatic transmission * 2000 4F27E 4-speed automatic transaxle The Mercon "V" specification was revised in 2002 (M2C919-E). This revised fluid was first used in the following transmissions: * 2003 4R75E 4-speed automatic transmission * 2003 4R75W 4-speed automatic transmission * 2003 5R110W 5-speed automatic transmission2001 - MERCON SP
In August 2001, Ford released the Mercon "SP" fluid specification (M2C919-D). Ford SSM 21114 (November 26, 2009) indicates that Mercon Replace "SP" is to be replaced with Mercon LV on Torqshift transmissions from the 2003 through 2008 model years. This SSM does not apply to the ZF 6HP26 transmission. This fluid first used in the following transmissions: * 2001 5R110W Torque Shift 5-Speed automatic transmission * 2005-2008 ZF 6HP26 6-Speed automatic transmission in Lincoln Navigator2005 - MERCON LV
In December 2005, Ford released the Mercon "LV" fluid specification (M2C938-A). This fluid was first used in the following transmissions: *2006 6R60 ZF 6-Speed automatic transmission *2006 FNR5 Mazda 5-Speed automatic transmission This specification was revised in 2007 for use in the following transmissions: *2007 6F50 6-speed automatic transaxle *2007 6R80 6-speed automatic transaxle *2009 6F35 6-speed automatic transaxle This specification was revised again in 2010 (M2C938-A2) and was optimized for anti-Squawk performance of clutches. This revised fluid was first used in the following transmissions: * 2011 6R140 6-speed automatic transmission * 2013 HF-35 eCVT hybrid transaxle2014 - MERCON ULV
The fluid specification for Mercon-ULV (Ultra-Low Viscosity) was introduced on January 2, 2014. Mercon ULV is composed of a Group 3+Ford "Lifetime" ATF
The 1967 Ford Type-F fluid specification was intended to produce a “lifetime” fluid which would never need to be changed. This was the first of many Ford “lifetime” fluids. The 1974 Ford Car Shop Manual reads "The automatic transmission is filled at the factory with "lifetime" fluid. If it is necessary to add or replace fluid, use only fluids which meet Ford Specification M2C33F. Many other transmission manufacturers have followed with their own "Lifetime" automatic transmission fluids".Example Maintenance Schedule
Lifetime automatic transmission fluids made from higher quality base oil and an additive package are more chemically stabile, less reactive, and do not experience oxidation as easily as lower quality fluids made from lower quality base oil and an additive package. Therefore, higher quality transmission fluids can last a long time in normal driving conditions (Typically 100,000 miles (160,000 km) or more). The definition of 'Lifetime Fluid" differs from transmission manufacturer to transmission manufacturer. Always consult the vehicle maintenance guide for the proper service interval for the fluid in your transmission and your driving conditions. 2018 Ford F-150 Example: According to the Scheduled Maintenance Guide of a 2018 Ford F-150 with "Lifetime Fluid" could have three different fluid service intervals depending on how the vehicle is driven:https://owner.ford.com/tools/account/how-tos/owner-manuals-search-results.html?type=ymm&year=2018&make=Ford&model=F-150 Owner Manuals & Warranties 1. Normal Driving * Normal commuting with highway driving * No or moderate load or towing * Flat to moderately hilly roads * No extended idling Under these driving conditions, the automatic transmission fluid needs to be serviced after every 150,000 miles (240,000 km). 2. Severe Driving * Moderate to heavy load or towing * Mountainous or off-road conditions * Extended idling * Extended hot or cold operation Under these driving conditions, the automatic transmission fluid needs to be serviced after every 30,000 miles (48,000 km). 3. Extreme Driving * Maximum load or towing * Extreme hot or cold operation Under these driving conditions, the automatic transmission fluid needs to be serviced also after every 30,000 miles.See also
*References
External links