Move Constructor

In class-based, object-oriented programming, a constructor (abbreviation: ctor) is a special type of subroutine called to create an object. It prepares the new object for use, often accepting arguments that the constructor uses to set required member variables.

A constructor resembles an instance method, but it differs from a method in that it has no explicit return type, it is not implicitly inherited and it usually has different rules for scope modifiers. Constructors often have the same name as the declaring class. They have the task of initializing the object's data members and of establishing the invariant of the class, failing if the invariant is invalid. A properly written constructor leaves the resulting object in a ''valid'' state. Immutable objects must be initialized in a constructor.

Most languages allow overloading the constructor in that there can be more than one constructor for a class, with differing parameters. Some languages take consideration of some special types of constructors. Constructors, which concretely use a single class to create objects and return a new instance of the class, are abstracted by factories, which also create objects but can do so in various ways, using multiple classes or different allocation schemes such as an object pool.

Types

Parameterized constructors

Constructors that can take at least one argument are termed as parameterized constructors. When an object is declared in a parameterized constructor, the initial values have to be passed as arguments to the constructor function. The normal way of object declaration may not work. The constructors can be called explicitly or implicitly. The method of calling the constructor implicitly is also called the shorthand method.

class Example ;

Example::Example() = default;

Example::Example(int x, int y) : x_(x), y_(y)

Example e = Example(0, 50); // Explicit call.
Example e2(0, 50); // Implicit call.

Default constructors

If the programmer does not supply a constructor for an instantiable class, Java compiler inserts a default constructor into your code on your behalf. This constructor is known as default constructor. You would not find it in your source code (the java file) as it would be inserted into the code during compilation and exists in .class file. The behavior of the default constructor is language dependent. It may initialize data members to zero or other same values, or it may do nothing at all. In Java, a "default constructor" refer to a nullary constructor that is automatically generated by the compiler if no constructors have been defined for the class or in the absence of any programmer-defined constructors (e.g. in Java, the default constructor implicitly calls the superclass's nullary constructor, then executes an empty body). All fields are left at their initial value of 0 (integer types), 0.0 (floating-point types), false (boolean type), or null (reference types).

#include

class Student ;

Copy constructors

Like C++, Java also supports "Copy Constructor". But, unlike C++, Java doesn't create a default copy constructor if you don't write your own. Copy constructors define the actions performed by the compiler when copying class objects. A Copy constructor has one formal parameter that is the type of the class (the parameter may be a reference to an object). It is used to create a copy of an existing object of the same class. Even though both classes are the same, it counts as a conversion constructor.
While copy constructors are usually abbreviated copy ctor or cctor, they have nothing to do with class constructors used in .NET using the same abbreviation.

Conversion constructors

Conversion constructors provide a means for a compiler to implicitly create an object belonging to one class based on an object of a different type. These constructors are usually invoked implicitly to convert arguments or operands to an appropriate type, but they may also be called explicitly.

Move constructors

In C++, move constructors take an Rvalue reference to an object of the class, and are used to implement ownership transfer of the parameter object's resources.

Syntax

* Java, C++, C#, ActionScript, and MATLAB have a naming convention in which constructors have the same name as the class with which they are associated.
* In PHP 5, a recommended name for a constructor is __construct. For backwards compatibility, a method with the same name as the class will be called if __construct method can not be found. Since PHP 5.3.3, this works only for non-namespaced classes.Constructors and Destructors
from PHP online documentation
* In PHP 7, you should always name the constructor as __construct. Methods with the same name as the class will trigger an E_DEPRECATED level error.Constructors and Destructors
from PHP online documentation
* In Perl, constructors are, by convention, named "new" and have to do a fair amount of object creation.
* In Moose object system for Perl, constructors (named ''new'') are automatically created and are extended by specifying a ''BUILD'' method.
* In Visual Basic .NET, the constructor is called "New".
* In Python, the constructor is split over two methods, "__new__" and "__init__". The __new__ method is responsible for allocating memory for the instance, and receives the class as an argument (conventionally called "cls"). The __init__ method (often called "the initialiser") is passed the newly created instance as an argument (conventionally called "self").
* Object Pascal constructors are signified by the keyword "constructor" and can have user-defined names (but are mostly called "Create").
* In Objective-C, the constructor method is split across two methods, "alloc" and "init" with the alloc method setting aside (allocating) memory for an instance of the class, and the init method handling the bulk of initializing the instance. A call to the method "new" invokes both the alloc and the init methods, for the class instance.

Memory organization

In Java, C#, and VB .NET, the constructor creates reference type objects in a special memory structure called the
"heap". Value types (such as int, double, etc.) are created in a sequential structure called the "stack".
VB .NET and C# also allow the use of the ''new'' operator to create value type objects, but these value type objects are created on the stack regardless of whether the operator is used or not.

In C++, objects are created on the stack when the constructor is invoked without the new operator, and created on the heap when the constructor is invoked with the new operator. Stack objects are deleted implicitly when they go out of scope, while heap objects must be deleted implicitly by a destructor or explicitly by using the ''delete'' operator.

Language details

C++

In C++, the name of the constructor is the name of the class. It returns nothing. It can have parameters like any member function. Constructor functions are usually declared in the public section, but can also be declared in the protected and private sections, if the user wants to restrict access to them.

The constructor has two parts. First is the initializer list which follows the parameter list and before the method body. It starts with a colon and entries are comma-separated. The initializer list is not required, but offers the opportunity to provide values for data members and avoid separate assignment statements. The initializer list is required if you have ''const'' or reference type data members, or members that do not have parameterless constructor logic. Assignments occur according to the order in which data members are declared (even if the order in the initializer list is different). The second part is the body, which is a normal method body enclosed in curly brackets.

C++ allows more than one constructor. The other constructors must have different parameters. Additionally constructors which contain parameters which are given default values, must adhere to the restriction that not all parameters are given a default value. This is a situation which only matters if there is a default constructor. The constructor of a base class (or base classes) can also be called by a derived class. Constructor functions are not inherited and their addresses cannot be referenced. When memory allocation is required, the ''new'' and ''delete'' operators are called implicitly.

A copy constructor has a parameter of the same type passed as ''const'' reference, for example ''Vector(const Vector& rhs)''. If it is not provided explicitly, the compiler uses the copy constructor for each member variable or simply copies values in case of primitive types. The default implementation is not efficient if the class has dynamically allocated members (or handles to other resources), because it can lead to double calls to ''delete'' (or double release of resources) upon destruction.

class Foobar ;

Example invocations:

Foobar a,
b(3),
c(5, M_PI/4);

On returning objects from functions or passing objects by value, the objects copy constructor will be called implicitly, unless return value optimization applies.

C++ implicitly generates a default copy constructor which will call the copy constructors for all base classes and all member variables unless the programmer provides one, explicitly deletes the copy constructor (to prevent cloning) or one of the base classes or member variables copy constructor is deleted or not accessible (private). Most cases calling for a customized copy constructor (e.g. reference counting, deep copy of pointers) also require customizing the destructor and the copy assignment operator. This is commonly referred to as the Rule of three.

C#

Example C# constructor:

public class MyClass

// Code somewhere
// Instantiating an object with the constructor above
MyClass c = new MyClass(42, "string");

C# static constructor

In C#, a ''static constructor'' is a static data initializer. Static constructors are also called ''class constructors''. Since the actual method generated has the name ''.cctor'' they are often also called "cctors".

Static constructors allow complex static variable initialization.
Static constructors are called implicitly when the class is first accessed. Any call to a class (static or constructor call), triggers the static constructor execution.
Static constructors are thread safe and implement a singleton pattern. When used in a generic programming class, static constructors are called at every new generic instantiation one per type. Static variables are instantiated as well.

public class MyClass

// Code somewhere
// Instantiating an object with the constructor above
// right before the instantiation
// The variable static constructor is executed and _A is 32
MyClass c = new MyClass();

CFML

CFML uses a method named 'init' as a constructor method.

Cheese.cfc

component

Create instance of a cheese.

myCheese = new Cheese( 'Cheddar' );

Since ColdFusion 10, CFML has also supported specifying the name of the constructor method:

component initmethod="Cheese"

Eiffel

In Eiffel, the routines which initialize new objects are called ''creation procedures''. Creation procedures have the following traits:

* Creation procedures have no explicit return type (by definition of ''procedure'').
* Creation procedures are named.
* Creation procedures are designated by name as creation procedures in the text of the class.
* Creation procedures can be explicitly invoked to re-initialize existing objects.
* Every effective (i.e., concrete or non-abstract) class must designate at least one creation procedure.
* Creation procedures must leave the newly initialized object in a state that satisfies the class invariant.

Although object creation involves some subtleties,Eiffel ISO/ECMA specification document
/ref> the creation of an attribute with a typical declaration x: T as expressed in a creation instruction create x.make consists of the following sequence of steps:

* Create a new direct instance of type T.
* Execute the creation procedure make to the newly created instance.
* Attach the newly initialized object to the entity x.

In the first snippet below, class POINT is defined. The procedure make is coded after the keyword feature.

The keyword create introduces a list of procedures which can be used to initialize instances. In this case the list includes default_create, a procedure with an empty implementation inherited from class ANY, and the make procedure coded within the class.

class
POINT
create
default_create, make

feature

make (a_x_value: REAL; a_y_value: REAL)
do
x := a_x_value
y := a_y_value
end

x: REAL
-- X coordinate

y: REAL
-- Y coordinate
...

In the second snippet, a class which is a client to POINT has a declarations my_point_1 and my_point_2 of type POINT.

In procedural code, my_point_1 is created as the origin (0.0, 0.0). Because no creation procedure is specified, the procedure default_create inherited from class ANY is used. This line could have been coded create my_point_1.default_create .
Only procedures named as creation procedures can be used in an instruction with the create keyword.
Next is a creation instruction for my_point_2, providing initial values for the my_point_2's coordinates.
The third instruction makes an ordinary instance call to the make procedure to reinitialize the instance attached to my_point_2 with different values.

my_point_1: POINT
my_point_2: POINT
...

create my_point_1
create my_point_2.make (3.0, 4.0)
my_point_2.make (5.0, 8.0)
...

F#

In F#, a constructor can include any let or do statements defined in a class. let statements define private fields and do statements execute code. Additional constructors can be defined using the new keyword.

type MyClass(_a : int, _b : string) = class
// Primary constructor
let a = _a
let b = _b
do printfn "a = %i, b = %s" a b

// Additional constructors
new(_a : int) = MyClass(_a, "") then
printfn "Integer parameter given"

new(_b : string) = MyClass(0, _b) then
printfn "String parameter given"

new() = MyClass(0, "") then
printfn "No parameter given"
end

// Code somewhere
// instantiating an object with the primary constructor
let c1 = new MyClass(42, "string")

// instantiating an object with additional constructors
let c2 = new MyClass(42)
let c3 = new MyClass("string")
let c4 = MyClass() // "new" keyword is optional

Java

In Java, constructors differ from other methods in that:

* Constructors never have an explicit return type.
* Constructors cannot be directly invoked (the keyword “new” invokes them).
* Constructors should not have non-access modifiers.

Java constructors perform the following tasks in the following order:

# Call the default constructor of the superclass if no constructor is defined.
# Initialize member variables to the specified values.
# Executes the body of the constructor.

Java permit users to call one constructor in another constructor using this() keyword.
But this() must be first statement.

class Example

public static void main(String[] args)

Java provides access to the superclass (computer science), superclass's constructor through the super keyword.

public class Example

// Code somewhere else
// Instantiating an object with the above constructor
Example e = new Example(42);

A constructor taking zero number of arguments is called a "no-arguments" or "no-arg" constructor.

JavaScript

As of ES6, JavaScript has direct constructors like many other programming languages. They are written as such

class FooBar

This can be instantiated as such

const foo = new FooBar('7')

The equivalent of this before ES6, was creating a function that instantiates an object as such

function FooBar (baz)

This is instantiated the same way as above.

Object Pascal

In Object Pascal, the constructor is similar to a factory method. The only syntactic difference to regular methods is the keyword constructor in front of the name (instead of procedure or function). It can have any name, though the convention is to have Create as prefix, such as in CreateWithFormatting. Creating an instance of a class works like calling a static method of a class: TPerson.Create('Peter').

program OopProgram;

type
TPerson = class
private
FName: string;
public
property Name: string read FName;
constructor Create(AName: string);
end;

constructor TPerson.Create(AName: string);
begin
FName := AName;
end;

var
Person: TPerson;
begin
Person := TPerson.Create('Peter'); // allocates an instance of TPerson and then calls TPerson.Create with the parameter AName = 'Peter'
end.

OCaml

In OCaml, there is one constructor. Parameters are defined right after the class name. They can be used to initialize instance variables and are accessible throughout the class. An anonymous hidden method called initializer allows to evaluate an expression immediately after the object has been built.

class person first_name last_name =
object
val full_name = first_name ^ " " ^ last_name

initializer
print_endline("Hello there, I am " ^ full_name ^ ".")

method get_last_name = last_name
end;;

let alonzo = new person "Alonzo" "Church" in (*Hello there, I am Alonzo Church.*)

print_endline alonzo#get_last_name (*Church*)

PHP

In PHP version 5 and above, the constructor is a method named __construct() (notice that it's a double underscore), which the keyword new automatically calls after creating the object. It is usually used to automatically perform initializations such as property initializations. Constructors can also accept arguments, in which case, when the new statement is written, you also need to send the constructor arguments for the parameters.

class Person

In PHP, a class is only allowed to declare a maximum of one constructor method. Static methods, factory classes or optional constructor arguments are some ways to facilitate multiple ways to create objects of a PHP class.

Perl 5

In Perl programming language version 5, by default, constructors are factory methods, that is, methods that create and return the object, concretely meaning create and return a blessed reference. A typical object is a reference to a hash, though rarely references to other types are used too. By convention the only constructor is named ''new'', though it is allowed to name it otherwise, or to have multiple constructors. For example, a Person class may have a constructor named ''new'' as well as a constructor ''new_from_file'' which reads a file for Person attributes, and ''new_from_person'' which uses another Person object as a template.

package Person;
# In Perl constructors are named 'new' by convention.
sub new
1;

Perl 5 with Moose

With the Moose object system for Perl, most of this boilerplate can be left out, a default ''new'' is created, attributes can be specified, as well as whether they can be set, reset, or are required. In addition, any extra constructor functionality can be included in a ''BUILD'' method which the Moose generated constructor will call, after it has checked the arguments. A ''BUILDARGS'' method can be specified to handle constructor arguments not in hashref / key => value form.

package Person;
# enable Moose-style object construction
use Moose;

# first name ( a string) can only be set at construction time ('ro')
has first_name => (is => 'ro', isa => 'Str', required => 1);
# last name ( a string) can only be set at construction time ('ro')
has last_name => (is => 'ro', isa => 'Str', required => 1);
# age (Integer) can be modified after construction ('rw'), and is not required
# to be passed to be constructor. Also creates a 'has_age' method which returns
# true if age has been set
has age => (is => 'rw', isa => 'Int', predicate => 'has_age');

# Check custom requirements
sub BUILD
1;

In both cases the Person class is instiated like this:

use Person;
my $p = Person->new( first_name => 'Sam', last_name => 'Ashe', age => 42 );

Python

In Python, constructors are defined by one or both of __new__ and __init__ methods. A new instance is created by calling the class as if it were a function, which calls the __new__ and __init__ methods. If a constructor method is not defined in the class, the next one found in the class's Method Resolution Order will be called.

In the typical case, only the __init__ method need be defined. (The most common exception is for immutable objects.)

>>> class ExampleClass:
... def __new__(cls, value):
... print("Creating new instance...")
... # Call the superclass constructor to create the instance.
... instance = super(ExampleClass, cls).__new__(cls)
... return instance
... def __init__(self, value):
... print("Initialising instance...")
... self.payload = value
>>> exampleInstance = ExampleClass(42)
Creating new instance...
Initialising instance...
>>> print(exampleInstance.payload)
42

Classes normally act as factories for new instances of themselves, that is, a class is a callable object (like a function), with the call being the constructor, and calling the class returns an instance of that class. However the __new__ method is permitted to return something other than an instance of the class for specialised purposes. In that case, the __init__ is not invoked.Data model
/ref>

Raku

With Raku, even more boilerplate can be left out, given that a default ''new'' method is inherited, attributes can be specified, as well as whether they can be set, reset, or are required. In addition, any extra constructor functionality can be included in a ''BUILD'' method which will get called to allow for custom initialization. A ''TWEAK'' method can be specified to post-process any attributes already (implicitly) initialized.

class Person

The Person class is instantiated like this:

my $p0 = Person.new( first-name => 'Sam', last-name => 'Ashe', age => 42 );
my $p1 = Person.new( first-name => 'grace', last-name => 'hopper' );
say $p1.full-name(); # OUTPUT: «Grace Hopper␤»

Alternatively, the named parameters can be specified using the colon-pair syntax in Perl 6:

my $p0 = Person.new( :first-name, :last-name, :age(42) );
my $p1 = Person.new( :first-name, :last-name );

And should you have set up variables with names identical to the named parameters, you can use a shortcut that will use the name of the variable for the named parameter:

my $first-name = "Sam";
my $last-name = "Ashe";
my $age = 42;
my $p0 = Person.new( :$first-name, :$last-name, :$age );

Ruby

In Ruby, constructors are created by defining a method called initialize. This method is executed to initialize each new instance.

irb(main):001:0> class ExampleClass
irb(main):002:1> def initialize
irb(main):003:2> puts "Hello there"
irb(main):004:2> end
irb(main):005:1> end
=> nil
irb(main):006:0> ExampleClass.new
Hello there
=> #

Visual Basic .NET

In Visual Basic .NET, constructors use a method declaration with the name "New".

Class Foobar
Private strData As String

' Constructor
Public Sub New(ByVal someParam As String)
strData = someParam
End Sub
End Class

' code somewhere else
' instantiating an object with the above constructor
Dim foo As New Foobar(".NET")

See also

* RAII
* Allocation site
* Creational pattern
* Destructor
* Global constructor in C++, and its C counterpart, ((constructor)) function attribute

Notes

References

{{Reflist, 30em

Method (computer programming)
Programming language comparisons