Motor coordination

Motor coordination is the orchestrated movement of multiple body parts as required to accomplish intended actions, like walking. This coordination is achieved by adjusting kinematic and kinetic parameters associated with each body part involved in the intended movement. The modifications of these parameters typically relies on sensory feedback from one or more sensory modalities ( see: multisensory integration), such as proprioception and vision.

Properties

Large Degrees of Freedom

Goal-directed and coordinated movement of body parts is inherently variable because there are many ways of coordinating body parts to achieve the intended movement goal. This is because the degrees of freedom (DOF) is large for most movements due to the many associated neuro-musculoskeletal elements.Bernstein N. (1967). The Coordination and Regulation of Movements. Pergamon Press. New York. Some examples of non-repeatable movements are when pointing or standing up from sitting.

Complexity

The complexity of motor coordination goes unnoticed in everyday tasks, such as in the task of picking up and pouring a bottle of water into a glass. This seemingly simple task is actually composed of multiple complex tasks. For instance, this task requires the following:

(1) properly reaching for the water bottle and then configuring the hand in a way that enables grasping the bottle.

(2) applying the correct amount of grip force to grasp the bottle without crushing it.

(3) coordinating the muscles required for lifting and articulating the bottle so that the water can be poured into the glass.

(4) terminating the action by placing the empty bottle back on the table.

Hand-eye coordination is also required in the above task. There is simultaneous coordination between hand and eye movement as dictated by the multi-sensory integration of proprioceptive and visual information. Additional levels of coordination are required depending on if the person intends to drink from the glass, give it to someone else, or simply put it on a table.

Types of Motor Coordination

Inter-limb

Inter-limb coordination is concerned about how movements are coordinated across limbs. In walking for instance, inter-limb coordination refers to the spatiotemporal patterns associated with the movement of the legs. Prior work in vertebrates showed that distinct inter-limb coordination patterns, called gaits, occur at different walking speed ranges as to minimize the cost of transport. Like vertebrates, invertebrates, such as six-legged insects, alter the coordination between their legs in a speed-dependent manner, but the resulting coordination patterns fall along a continuum.

In bimanual tasks (tasks involving two hands), it was found that the functional segments of the two hands are tightly synchronized. One of the postulated theories for this functionality is the existence of a higher, "coordinating schema" that calculates the time it needs to perform each individual task and coordinates it using a feedback mechanism. There are several areas of the brain that are found to contribute to temporal coordination of the limbs needed for bimanual tasks, and these areas include the premotor cortex (PMC), the parietal cortex, the mesial motor cortices, more specifically the supplementary motor area (SMA), the cingulate motor cortex (CMC), the primary motor cortex (M1), and the cerebellum.

Several studies have proposed that inter-limb coordination can be modeled by coupled phase oscillators, a key component of a central pattern generator (CPG) control architecture. In this framework, the coordination between limbs is dictated by the relative phase of the oscillators representing the limbs. Specifically, an oscillator associated with a particular limb determines the progression of that limb through its movement cycle (e.g. step cycle in walking). In addition to driving the relative limb movement in a forward manner, sensory feedback can be incorporated into the CPG architecture. This feedback also dictates the coordination between the limbs by independently modifying the movement of the limb that the feedback is acting on.

Intra-limb

Intra-limb coordination involves orchestrating the movement of the limb segments that make up a single limb. This coordination can be achieved by controlling/restricting the joint trajectories and/or torques of each limb segment as required to achieve the overall desired limb movement, as demonstrated by the joint-space model. Alternatively, intra-limb coordination can be accomplished by just controlling the trajectory of an end-effector, such as a hand. An example of such concept is the minimum-jerk model proposed by Neville Hogan and Tamar Flash, which suggests that the parameter the nervous system controls is the spatial path of the hand, ensuring that it is maximally smooth. Francesco Lacquaniti, Carlo Terzuolo and Paolo Viviani showed that the angular velocity of a pen's tip varies with the two-thirds power of the path curvature (two-thirds power law) during drawing and handwriting. The two-thirds power law is compatible with the minimum-jerk model, but also with central pattern generators. It has subsequently been shown that the central nervous system is devoted to its coding. Importantly, control strategies for goal directed movement are task-dependent. This was shown by testing two different conditions: (1) subjects moved cursor in the hand to the target and (2) subjects move their free hand to the target. Each condition showed different trajectories: (1) straight path and (2) curved path.

Eye-hand

Eye–hand coordination is associated with how eye movements are coordinated with and influence hand movements. Prior work implicated eye movement in the motor planning of goal-directed hand movement.

Learning of Coordination Patterns

The following pages are recommended for understanding how coordination patterns are learned or adapted

*Motor learning
*Motor adaptation
*Motor control, Internal model, and sensory-motor coupling

Quantifying inter-limb and intra-limb coordination

Refer to

study of animal locomotion

Related Theories of Motor Coordination

Muscle synergies

Nikolai Bernstein proposed the existence of muscle synergies as a neural strategy of simplifying the control of multiple degrees of freedom. A functional muscle synergy is defined as a pattern of co-activation of muscles recruited by a single neural command signal. One muscle can be part of multiple muscle synergies, and one synergy can activate multiple muscles. The current method of finding muscle synergies is by using statistical and/or coherence analyses on measured EMG (electromyography) signals of different muscles during certain movements. A reduced number of control elements (muscle synergies) are combined to form a continuum of muscle activation for smooth motor control during various tasks. Directionality of a movement has an effect on how the motor task is performed (i.e. walking forward vs. walking backward, each uses different levels of contraction in different muscles). Moreover, it is thought that the muscle synergies limited the number of degrees of freedom by constraining the movements of certain joints or muscles (flexion and extension synergies). However, the biological reason for muscle synergies is debated.

Uncontrolled manifold hypothesis

Another hypothesis proposes that the central nervous system does not eliminate the redundant degrees of freedom, but instead uses them to ensure flexible and stable performance of motor tasks at the cost of motor variability. The Uncontrolled Manifold (UCM) Hypothesis provides a way to quantify a "muscle synergy" in this framework. This hypothesis defines "synergy" a little differently from that stated above; a synergy represents an organization of elemental variables (degrees of freedom) that stabilizes an important performance variable. Elemental variable is the smallest sensible variable that can be used to describe a system of interest at a selected level of analysis, and a performance variable refers to the potentially important variables produced by the system as a whole. For example, in a multi-joint reaching task, the angles and the positions of certain joints are the elemental variables, and the performance variables are the endpoint coordinates of the hand.

This hypothesis proposes that the controller (the brain) acts in the space of elemental variables (i.e. the rotations shared by the shoulder, elbow, and wrist in arm movements) and selects the feasible manifolds (i.e. sets of angular values corresponding to a final position). This hypothesis acknowledges that variability is always present in movement, and it categorizes it into two types: (1) bad variability and (2) good variability. Bad variability affects the important performance variable and causes large errors in the result of a motor task, and good variability keeps the performance task unchanged and leads to a successful outcome. An interesting example of the good variability was observed in the movements of the tongue, which are responsible for the speech production.More precisely, the movements of tongue were modeled by means of a biomechanical tongue model, BTM, controlled by an optimum internal model, which minimizes the length of the path traveled in the internal space during the production of the sequences of tasks (see Blagouchine & Moreau). The stiffness level to the tongue's body creates some variability (in terms of the acoustical parameters of speech, such as formants), but this variability does not impair the quality of speech.Iaroslav Blagouchine and Eric Moreau. ''Control of a Speech Robot via an Optimum Neural-Network-Based Internal Model with Constraints.'' IEEE Transactions on Robotics, vol. 26, no. 1, pp. 142—159, February 2010.
/ref> One of the possible explanations might be that the brain only works to decrease the bad variability that hinders the desired result, and it does so by increasing the good variability in the redundant domain.

Other relevant pages

*Perceptual control theory
*Developmental coordination disorder
*Sensory processing

References

{{reflist, 30em

Motor control
Physical fitness