Modelling clay or modelling compound is any of a group of malleable substances used in building and sculpting. The material compositions and production processes vary considerably.

Ceramic clay

Ceramic clays are water-based substances made from

clay minerals Clay minerals are hydrous aluminium phyllosilicates (e.g. kaolin, Al2 Si2 O5( OH)4), sometimes with variable amounts of iron, magnesium, alkali metals, alkaline earths, and other cations found on or near some planetary surfaces. Clay mineral ...

and other raw materials. They are baked at high temperatures in a process known as

firing Dismissal (also called firing) is the termination of employment by an employer against the will of the employee. Though such a decision can be made by an employer for a variety of reasons, ranging from an economic downturn to performance-related ...

to create

ceramic A ceramic is any of the various hard, brittle, heat-resistant and corrosion-resistant materials made by shaping and then firing an inorganic, nonmetallic material, such as clay, at a high temperature. Common examples are earthenware, porcelain ...

s, such as

terra cotta Terracotta, terra cotta, or terra-cotta (; ; ), in its material sense as an earthenware substrate, is a clay-based unglazed or glazed ceramic where the fired body is porous. In applied art, craft, construction, and architecture, terracotta ...

earthenware Earthenware is glazed or unglazed nonvitreous pottery that has normally been fired below . Basic earthenware, often called terracotta, absorbs liquids such as water. However, earthenware can be made impervious to liquids by coating it with a ce ...

stoneware Stoneware is a rather broad term for pottery or other ceramics fired at a relatively high temperature. A modern technical definition is a Vitrification#Ceramics, vitreous or semi-vitreous ceramic made primarily from stoneware clay or non-refracto ...

, and

porcelain Porcelain () is a ceramic material made by heating substances, generally including materials such as kaolinite, in a kiln to temperatures between . The strength and translucence of porcelain, relative to other types of pottery, arises mainl ...

Paper clay Paper clay (sometimes referred to as fiberclay) is any clay body to which processed cellulose fiber (paper being the most common) has been added. Earthenware, terra cotta, stoneware, porcelain and bone china clay bodies can be made into paper c ...

produced by pottery clay manufacturers is a clay body to which a small percentage of processed cellulose fiber has been added. When kiln-fired, the paper burns out, leaving the clay body. Consequently, the firing temperatures and glazes selection should be the same on those used with the clay body.

Oil-based clay

Oil-based clays are made from combinations of

oil An oil is any nonpolar chemical substance that is composed primarily of hydrocarbons and is hydrophobic (does not mix with water) & lipophilic (mixes with other oils). Oils are usually flammable and surface active. Most oils are unsaturated ...

wax Waxes are a diverse class of organic compounds that are lipophilic, malleable solids near ambient temperatures. They include higher alkanes and lipids, typically with melting points above about 40 °C (104 °F), melting to give low ...

es, and

. Unlike water, the oils do not

evaporate Evaporation is a type of vaporization that occurs on the surface of a liquid as it changes into the gas phase. High concentration of the evaporating substance in the surrounding gas significantly slows down evaporation, such as when humidi ...

and oil-based clays remain malleable even when left in dry environments for long periods. Articles made from oil-based clays cannot be fired, and thus are not ceramics. Because rising temperature decreases oil

viscosity The viscosity of a fluid is a measure of its resistance to deformation at a given rate. For liquids, it corresponds to the informal concept of "thickness": for example, syrup has a higher viscosity than water. Viscosity quantifies the inte ...

, the malleability is influenced by heating or cooling the clay. Oil-based clay is not water-soluble. As it can be re-used, it is a material commonly used by

stop motion Stop motion is an animated filmmaking technique in which objects are physically manipulated in small increments between individually photographed frames so that they will appear to exhibit independent motion or change when the series of frames i ...

animators who need to bend and move their models. It is available in a multitude of colors and is non-toxic. Readily worked in fine detail, oil-based clays are also suitable for the creation of detailed sculptures from which molds can be made.

Casting Casting is a manufacturing process in which a liquid material is usually poured into a mold, which contains a hollow cavity of the desired shape, and then allowed to solidify. The solidified part is also known as a ''casting'', which is ejected ...

s and reproductions can then be produced from much more durable materials. Cars and airplanes may be created using industrial design-grade modelling clay. Oil-based clays are referred to by multiple of

genericized trademarks A generic trademark, also known as a genericized trademark or proprietary eponym, is a trademark or brand name that, because of its popularity or significance, has become the generic term for, or synonymous with, a general class of products or ...

. * ''Plastilin'' (or Plasteline), which was patented in

Germany Germany,, officially the Federal Republic of Germany, is a country in Central Europe. It is the second most populous country in Europe after Russia, and the most populous member state of the European Union. Germany is situated betwe ...

Franz Kolb Franz Kolb ( fl. 1880s) was a German pharmacist and the inventor of the modeling paste Plastilin. In English-speaking countries this material is also known as "plasticine." Because of different patent rights in Germany and England there are dif ...

in 1880, was developed by Claude Chavant in 1892 and trademarked in 1927. * ''

Plasticine Plasticine is a putty-like modelling material made from calcium salts, petroleum jelly and aliphatic acids. Though originally a brand name for the British version of the product, it is now applied generically in English as a product categor ...

'' was invented in 1897 by

William Harbutt William Harbutt (13 February 1844 – 1 June 1921) was a British artist and the inventor of Plasticine. Early life Born in North Shields, England, the son of Thomas Harbutt (5 August 1803 – 1880) and Elizabeth Whitehouse Jefcoate (27 June 1804 ...

Bathampton Bathampton () is a village and civil parish east of Bath, England on the south bank of the River Avon. The parish has a population of 1,603. The Kennet and Avon Canal passes through the village and a toll bridge links Bathampton to Batheast ...

, England. * ''Plastilina'' is trademarked as ''Roma Plastilina'' by Sculpture House, Inc. According to their website, their formula is 100 years old. Roma Plastilina contains sulfur, and since certain moldmaking compounds do not set in sulfur's presence, making molds of items made of

industrial plasticine Industrial plasticine is a modeling material which is mainly used by automotive design studios. It was developed as an industrial version of plasticine or hobby clay. Industrial plasticine is based on wax and typically contains sulfur, which g ...

is difficult.

Polymer clay

Polymer clay is a modelling material that cures when heated from for 15 minutes per of thickness, and does not significantly shrink or change shape during the process. Despite being called "clay", it generally contains no clay minerals. Polymer clay is sold in craft, hobby, and art stores, and is used by artists, hobbyists, and children. Polymer clay is used in animation, since it allows static forms to be manipulated frame after frame. Leading brands of polymer clay include

Fimo Fimo is a brand of polymer clay made by German company Staedtler (''STAEDTLER Mars GmbH & Co. KG''). Fimo is sold worldwide. Its main U.S. competitor is the American brand Sculpey. The material comes in many different colors; there are many fin ...

, Kato Polyclay,

Sculpey Sculpey (often misspelled as ''Sculpy'') is the brand name for a type of polymer clay that can be molded and put into a conventional oven to harden, as opposed to typical modeling clays, which require a much hotter oven, such as a kiln. Until it ...

, Modello and Crafty Argentina.

Paper clay

Paper clay is handmade or commercially available clay to which a small percentage of processed cellulose fiber is added. The fiber increases the tensile strength of the dry clay and enables dry-to-dry and wet-to-dry joins. Commercial paper clays air-dry to a firm, lightweight sculpture, with minimal shrinking during the drying process. Paper clay can be used as an unfired body in craft and doll-making. It is used in ceramic art studios as sculptural and functional

studio pottery Studio pottery is pottery made by professional and amateur artists or artisans working alone or in small groups, making unique items or short runs. Typically, all stages of manufacture are carried out by the artists themselves.Emmanuel Cooper, ...

References

{{DEFAULTSORT:Modeling Clay Craft materials Sculpture materials

Ceramic clay

Oil-based clay

Polymer clay

Paper clay

See also

References