Mitre Clamp

Mitre clamps are designed to hold

mitre joint A mitre joint (often miter in American English) is a joint made by cutting each of two parts to be joined, across the main surface, usually at a 45° angle, to form a corner, usually to form a 90° angle, though it can comprise any angle greater ...

s together. The earliest mitre clamps are a simple spring in a C-shape with sharpened points that are sprung onto the outside corner of the mitre joint. The right angled plates are higher than the screws and the red holder. The screws go under the frame (work-piece) to be held, and the red bit clamps down on the lower-edge of the frame. Recent designs are more complicated; a rigid body holds one fixed and one moveable

jaw The jaw is any opposable articulated structure at the entrance of the mouth, typically used for grasping and manipulating food. The term ''jaws'' is also broadly applied to the whole of the structures constituting the vault of the mouth and serv ...

activated by a

cam Calmodulin (CaM) (an abbreviation for calcium-modulated protein) is a multifunctional intermediate calcium-binding messenger protein expressed in all eukaryotic cells. It is an intracellular target of the secondary messenger Ca2+, and the bin ...

. Examples of the newer clamps are Jim Chestnut's "Clam Clamp" and the Maestro Mitre Clamp. Woodworking clamps Woodworking hand tools {{Tool-stub