The Mikulin AM-42 was a 1940s

Soviet The Soviet Union,. officially the Union of Soviet Socialist Republics. (USSR),. was a transcontinental country that spanned much of Eurasia from 1922 to 1991. A flagship communist state, it was nominally a federal union of fifteen nation ...

aircraft piston engine designed by

Alexander Mikulin Alexander Alexandrovich Mikulin (russian: Алекса́ндр Алекса́ндрович Мику́лин) (February 14 ( O.S. February 2), 1895, Vladimir – May 13, 1985, Moscow) was a Soviet Russian aircraft engine designer and chief desig ...

. Representing a high-output version of the AM-38F, the AM-42 was used in the Ilyushin Il-1 fighter, and the Il-8 and Il-10 ground attack aircraft.

Design and development

The AM-42 was a low-altitude engine for attack aircraft that evolved from the earlier AM-38F. Compared to the AM-38F it had a reduced compression ratio, increased supercharging, strengthened and counterbalanced crankshaft, strengthened connecting rods, strengthened pistons and a revised oil system. The AM-42 was developed by the design bureau of Factory No. 24 now called the Salyut factory in Moscow. The first examples were produced in November 1942 and passed its 50-hour Factory tests in January 1943. In September 1943 the AM-42 began State tests but these were unfinished due to piston damage while testing. A strengthened version of the AM-42 completed its State tests in spring 1944. The AM-42 was produced in large numbers between 1944–1948 and an improved 400 hour service life version was produced from 1951–1954. The majority of engines were produced at Factory No. 24 which was evacuated to Kuybyshev at the end of 1941. 10,232 engines were built by the time it was phased out of production in the USSR in 1954. In addition to being produced in the USSR it was also produced in Czechoslovakia as the M-42 at the Dimitrov factory to power the Avia B-33, a Czech built version of the Il-10.

Variants

* AM-42TK: A version with a TK-300B

turbo-supercharger In an internal combustion engine, a turbocharger (often called a turbo) is a forced induction device that is powered by the flow of exhaust gases. It uses this energy to compress the intake gas, forcing more air into the engine in order to pr ...

. * AM-42FNV: A

fuel injected Fuel injection is the introduction of fuel in an internal combustion engine, most commonly automotive engines, by the means of an injector. This article focuses on fuel injection in reciprocating piston and Wankel rotary engines. All comp ...

version. * AM-42B-TK: A version with two TK-300B turbo-superchargers. * AM-42FB-TK: A version with two TK-1A turbo-superchargers.Kotelnikov 2005, p. 114.

Specifications (AM-42)

References

Notes

Bibliography