Meyer's ''Little Toot'' is a
homebuilt
Homebuilt machines are machines built outside of specialised workshops or factories. This can include different things such as kit cars or homebuilt computers, but normally it pertains to homebuilt aircraft, also known as amateur-built aircraft or ...
biplane
A biplane is a fixed-wing aircraft with two main wings stacked one above the other. The first powered, controlled aeroplane to fly, the Wright Flyer, used a biplane wing arrangement, as did many aircraft in the early years of aviation. While ...
that was designed by George W. Meyer (1916–1982) of
Corpus Christi, Texas
Corpus Christi (; Ecclesiastical Latin: "'' Body of Christ"'') is a coastal city in the South Texas region of the U.S. state of Texas and the county seat and largest city of Nueces County, it also extends into Aransas, Kleberg, and San Patrici ...
.
Design and development
Design of the original ''Little Toot'' was started by George Meyer in 1952. Along with drawings, a
scale model
A scale model is a physical model which is geometrically similar to an object (known as the prototype). Scale models are generally smaller than large prototypes such as vehicles, buildings, or people; but may be larger than small prototypes ...
was built of the aircraft during the design phase. It was designed with
aerobatics
Aerobatics is the practice of flying maneuvers involving aircraft attitudes that are not used in conventional passenger-carrying flights. The term is a portmanteau of "aerial" and "acrobatics". Aerobatics are performed in aeroplanes and glid ...
in mind and is stressed for 10
g+/- loads.
The ''Little Toot'' is a single seat, open cockpit, biplane with
conventional landing gear
Conventional landing gear, or tailwheel-type landing gear, is an aircraft undercarriage consisting of two main wheels forward of the center of gravity and a small wheel or skid to support the tail.Crane, Dale: ''Dictionary of Aeronautical Term ...
. Its design accommodates an optional cockpit canopy. The
fuselage
The fuselage (; from the French ''fuselé'' "spindle-shaped") is an aircraft's main body section. It holds crew, passengers, or cargo. In single-engine aircraft, it will usually contain an engine as well, although in some amphibious aircraft t ...
is welded steel tubing aluminum covering. The original tail section is a metal
monocoque
Monocoque ( ), also called structural skin, is a structural system in which loads are supported by an object's external skin, in a manner similar to an egg shell. The word ''monocoque'' is a French term for "single shell".
First used for boats, ...
truss section from a
Luscome 8A. The wings use
spruce
A spruce is a tree of the genus ''Picea'' (), a genus of about 35 species of coniferous evergreen trees in the family Pinaceae, found in the northern temperate and boreal (taiga) regions of the Earth. ''Picea'' is the sole genus in the subfami ...
spars with wooden
ribs
The rib cage, as an enclosure that comprises the ribs, vertebral column and sternum in the thorax of most vertebrates, protects vital organs such as the heart, lungs and great vessels.
The sternum, together known as the thoracic cage, is a semi- ...
and are
fabric covered. The upper wing is swept back eight degrees. The lower wing has 2.5 degrees of
dihedral with nearly full-length ailerons. The
landing gear
Landing gear is the undercarriage of an aircraft or spacecraft that is used for takeoff or landing. For aircraft it is generally needed for both. It was also formerly called ''alighting gear'' by some manufacturers, such as the Glenn L. Martin ...
and
wheel pants
An aircraft fairing is a structure whose primary function is to produce a smooth outline and reduce drag.Crane, Dale: ''Dictionary of Aeronautical Terms, Third Edition'', page 206. Aviation Supplies & Academics Inc, Newcastle Washington, 1997. ...
were sourced from a
Cessna 140
The Cessna 120, 140, and 140A, are single-engine, two-seat, conventional landing gear (tailwheel), light general aviation aircraft that were first produced in 1946, immediately following the end of World War II. Production ended in 1951, and ...
tail-dragger.
The production cost of the original ''Little Toot'' aircraft was 2,000 in 1958.
The aircraft was named ''Little Toot'' after the tugboat that liked doing figure eights in a Disney movie, itself based on
a children's story written and illustrated by Hardie Gramatky.
Operational history
The ''Little Toot'' prototype was first displayed at the 1957
Experimental Aircraft Association
The Experimental Aircraft Association (EAA) is an international organization of aviation enthusiasts based in Oshkosh, Wisconsin, United States. Since its inception, it has grown internationally with over 200,000 members and nearly 1,000 chapt ...
convention in
Milwaukee, Wisconsin
Milwaukee ( ), officially the City of Milwaukee, is both the most populous and most densely populated city in the U.S. state of Wisconsin and the county seat of Milwaukee County, Wisconsin, Milwaukee County. With a population of 577,222 at th ...
. At this event, ''Little Toot'', N61G, won the
Mechanix Illustrated
''Mechanix Illustrated'' was an American printed magazine that was originally published by Fawcett Publications. Its title was founded in 1928 to compete against the older ''Popular Science'' and ''Popular Mechanics''. Billed as "The How-To-Do Ma ...
Trophy for Outstanding Achievement, First Place and Second Place for Outstanding Design. EAA founder
Paul Poberezny
Paul Howard Poberezny (September 14, 1921 – August 22, 2013) was an American aviator, entrepreneur, and aircraft designer. He founded the Experimental Aircraft Association (EAA) in 1953, and spent the greater part of his life promoting hom ...
flew ''Little Toot'' several times.
Specifications
See also
References
External links
*{{Official, www.littletootbiplane.com, Meyer Aircraft Web site
Homebuilt aircraft
Biplanes
1950s United States experimental aircraft