McCrossins Mill
   HOME

TheInfoList



OR:

The McCrossins Mill is a heritage-listed former mill and store and now museum at Salisbury Street,
Uralla Uralla is a town on the Northern Tablelands, New South Wales, Australia. The town is located at the intersection of the New England Highway and Thunderbolts Way, north of Sydney and about south west of the city of Armidale. At the , the townshi ...
,
Uralla Shire Uralla Shire is a local government area located in the New England region of New South Wales, Australia. The New England Highway passes through the Shire. The Shire was established on 1 January 1948 as a result of the amalgamation of the Mun ...
,
New South Wales ) , nickname = , image_map = New South Wales in Australia.svg , map_caption = Location of New South Wales in AustraliaCoordinates: , subdivision_type = Country , subdivision_name = Australia , established_title = Before federation , es ...
, Australia. It was designed by John McCrossin and built by Unknown. The property is owned by Uralla Historical Society Inc. It was added to the
New South Wales State Heritage Register The New South Wales State Heritage Register, also known as NSW State Heritage Register, is a heritage list of places in the state of New South Wales, Australia, that are protected by New South Wales legislation, generally covered by the Heritag ...
on 2 April 1999.


History

The Mill was constructed between the late 1860s and early 1870s by John McCrossin. Equipped with a 16 horsepower engine, the mill operated three mill stones with a production capacity of around 1000 bushels a week. McCrossin built the mill in the expectation that the
New England New England is a region comprising six states in the Northeastern United States: Connecticut, Maine, Massachusetts, New Hampshire, Rhode Island, and Vermont. It is bordered by the state of New York to the west and by the Canadian provinces ...
region would become a major exporter of flour to other parts of the Colony. Soon after the completion of the mill, however, flour prices began to fall. McCrossin could not compete with the two other mills already established in Uralla and the further four in
Armidale Armidale is a city in the Northern Tablelands, New South Wales, Australia. Armidale had a population of 24,504 as of June 2018. Estimated resident population, 30 June 2018. It is the administrative centre for the Northern Tablelands region. It ...
, one in
Inverell Inverell is a large town in northern New South Wales, Australia, situated on the Macintyre River, close to the Queensland border. It is also the centre of Inverell Shire. Inverell is located on the Gwydir Highway on the western slopes of the No ...
and one in Walcha. Drought and the importation of higher quality South Australian flour killed the New England wheat growing and, therefore, the milling business. South Australian flour was of a higher quality as the wheat ripened more evenly and thoroughly, allowing for the use of mechanical harvesters. Additionally, South Australian mills used steel rollers to mill the grain, producing a finer flour than the gritty product created by the mill stones employed by the New England millers. The Chaff Shed was probably constructed in response to falling trade. Unlike the Mill, it was constructed as cheaply as possible to diversify the services offered by the Mill. The mill apparently closed in the 1890s. Early in the 19th century the buildings were bought by a skin buyer. The Mill then passed into the hands of the Cooper family, who operated a hardware and undertaking business in it. During this period part of the mill was used by Mr Crossman, who was a tank maker. Also around this time the Mill's engine was removed to the Rocky River gold fields. About 1935 the McRae family purchased the Mill as a store for their grocery and produce business. Ken McRae buried the boiler outside the eastern wall of the mill in the early 1960s. Both the McRaes and Coopers used the well to dispose of rubbish so that it had been filled by 1960. The Uralla Historical Society bought the Mill in 1979 and began restorations, funded by the Heritage Council of NSW. Today the Mill is operated as a museum by the Society. Constructed next to John McCrossin's Flour Mill in 1881 as a chaff cutting shed, with power delivered by a wooden driveshaft through an aperture in the "western" wall of the mill.Mayo, 2002 *1940 - 1979 - used as storage by the McCrae's Hardware Shop, and known as the "Wireshed". *1979 - purchased by Uralla Historical Society. *1982-84 - squared and stabilised by the society.


Description

;Mill Building A three storey brick structure facing onto Salisbury Street in a south-south-westerly direction. A
verandah A veranda or verandah is a roofed, open-air gallery or porch, attached to the outside of a building. A veranda is often partly enclosed by a railing and frequently extends across the front and sides of the structure. Although the form ''veran ...
stretches the length of the building, sheltering a central double door. Two windows are evenly spaced on either side of the door, on the upper five windows are symmetrically aligned. The ground floor on the north, west and south walls is constructed of roughly dressed local white
granite Granite () is a coarse-grained (phaneritic) intrusive igneous rock composed mostly of quartz, alkali feldspar, and plagioclase. It forms from magma with a high content of silica and alkali metal oxides that slowly cools and solidifies undergro ...
blocks, infilled with smaller pieces. The front facade is coursed in evener blocks. The upper storeys are of red brick. The outer walls and parts of the inner walls have been laid in
English bond Brickwork is masonry produced by a bricklayer, using bricks and mortar. Typically, rows of bricks called '' courses'' are laid on top of one another to build up a structure such as a brick wall. Bricks may be differentiated from blocks by si ...
(a course of headers alternating with a course of stretchers). On the inside back wall of the first and second floors has been laid in what could be described as a crude form of Colonial bond. Colonial bond usually consists of three courses of stretchers followed by one course of headers. In this example up to five courses of stretchers have been laid between the intervening courses of headers. Colonial bond did not become popular in Sydney until the early 1880s (mill construction began in late 1860s). At the rear of the building there is a row of windows on the first floor. On the ground floor a series of windows and doors have been made into the original structure. In the south east corner of the eastern wall a door opens into the original engine room, which runs the width of the building. A door level with the first opens into the larger milling area. Halfway along the wall dividing the engine and milling rooms is a wall box, originally to transfer power between the two. Two flights of steep
stairs Stairs are a structure designed to bridge a large vertical distance between lower and higher levels by dividing it into smaller vertical distances. This is achieved as a diagonal series of horizontal platforms called steps which enable passage ...
, located towards Salisbury Street in the milling room, lead to the second and third floors. These floors are supported by a series of four brick
piers Piers may refer to: * Pier, a raised structure over a body of water * Pier (architecture), an architectural support * Piers (name), a given name and surname (including lists of people with the name) * Piers baronets, two titles, in the baronetages ...
dividing the front two thirds of the milling area from the rear. These piers extend up through the second and third floors to support the roof. The
hipped roof A hip roof, hip-roof or hipped roof, is a type of roof where all sides slope downwards to the walls, usually with a fairly gentle slope (although a tented roof by definition is a hipped roof with steeply pitched slopes rising to a peak). Thus, ...
was originally wooden shingles, which has subsequently been replaced with
corrugated iron Corrugated galvanised iron or steel, colloquially corrugated iron (near universal), wriggly tin (taken from UK military slang), pailing (in Caribbean English), corrugated sheet metal (in North America) and occasionally abbreviated CGI is a bu ...
. Between the ground and first floors is a trap door and a series of small chutes to allow for the movement of grain and flour between the floors. ;Chaff Shed The Chaff Shed occupies approximately , between McCrossin's Mill 1870 and McCrossin's Stables/Store . The first floor and steeply pitched roof with its tapered
rafters A rafter is one of a series of sloped structural members such as Beam (structure), wooden beams that extend from the ridge or hip to the wall plate, downslope perimeter or eave, and that are designed to support the roof Roof shingle, shingles ...
and shingle
battens A batten is most commonly a strip of solid material, historically wood but can also be of plastic, metal, or fiberglass. Battens are variously used in construction, sailing, and other fields. In the lighting industry, battens refer to linea ...
are supported by twenty one huge, round poles, approximately in diameter. Roof and walls are now corrugated iron. There is a loading bay on the first floor.


Condition

The mill's physical condition is fair; and the archaeological potential is low. Its position and basic condition (but not cosmetic condition), make it significant.


Modifications and dates

The following modifications have been made: *Windows were installed in the front wall. *1975Dovecot removed *1982-84Flooring on ground floor demolished; and rotted poles replaced or scarfed.


Heritage listing

McCrossins Mill is of State significance as representing the endeavours of early settlers to determine the agricultural pursuits best suited to various part of New South Wales. While wheat and flour production ultimately failed in the area, McCrossins Mill is a reminder of the trial and error approach to agriculture. McCrossins Mill is also representative of the speculation in industry driven by the gold rush, being built to supply that market. McCrossins Mill was listed on the
New South Wales State Heritage Register The New South Wales State Heritage Register, also known as NSW State Heritage Register, is a heritage list of places in the state of New South Wales, Australia, that are protected by New South Wales legislation, generally covered by the Heritag ...
on 2 April 1999 having satisfied the following criteria. The place has a strong or special association with a person, or group of persons, of importance of cultural or natural history of New South Wales's history. The McCrossin family were pioneers of commerce in Uralla: Flour milling, retailers, hoteliers etc. The place is important in demonstrating aesthetic characteristics and/or a high degree of creative or technical achievement in New South Wales. The existence of such a formidable rural building in the village precinct is most unusual. The place has strong or special association with a particular community or cultural group in New South Wales for social, cultural or spiritual reasons. The chaff shed now has a very special association with the Uralla Historical Society. The place possesses uncommon, rare or endangered aspects of the cultural or natural history of New South Wales. The existence of such a formidable rural building in the village precinct is most unusual.


See also


References


Bibliography

* * *


Attribution

{{NSW-SHR-CC, name=McCrossins Mill, dno=5045484, id=00161, year=2018, accessdate=1 June 2018 New South Wales State Heritage Register Uralla, New South Wales Commercial buildings in New South Wales Industrial buildings in New South Wales Retail buildings in New South Wales Farms in New South Wales Articles incorporating text from the New South Wales State Heritage Register