The Maserati 200S (Tipo 52) is a racing car made by Italian automobile manufacturer
Maserati as a successor to the
Maserati A6GCS
Maserati A6 were a series of grand tourers, racing sports cars and single seaters made by Maserati of Italy between 1947 and 1956. They were named for Alfieri Maserati (one of the Maserati brothers, founders of Maserati) and for their straight-si ...
. 28 cars were made in total. The development of the 200S, codenamed Tipo 52 started in 1952, led by
Vittorio Bellentani. In response to Ferrari's 500 Mondial racing car which featured a four-cylinder engine and was quite successful in sports car racing.
The car had a
inline-four
A straight-four engine (also called an inline-four) is a four-cylinder piston engine where cylinders are arranged in a line along a common crankshaft.
The vast majority of automotive four-cylinder engines use a straight-four layout (with the e ...
light-
alloy
An alloy is a mixture of chemical elements of which at least one is a metal. Unlike chemical compounds with metallic bases, an alloy will retain all the properties of a metal in the resulting material, such as electrical conductivity, ductilit ...
engine, featuring dual
overhead valve
An overhead valve (OHV) engine, sometimes called a ''pushrod engine'', is a piston engine whose valves are located in the cylinder head above the combustion chamber. This contrasts with earlier flathead engines, where the valves were located b ...
s per cylinder and
twin camshafts, double
Weber 50DCO3 (first few cars only) or 45DCO3
carburetors. The engine was rated at at 7,500 rpm. Many chassis components were identical to the
Maserati 150S in order to speed up development, except the rigid rear axle inherited from the
Maserati A6
Maserati A6 were a series of grand tourers, racing sports cars and single seaters made by Maserati of Italy between 1947 and 1956. They were named for Alfieri Maserati (one of the Maserati brothers, founders of Maserati) and for their straight-si ...
.
Maserati made the first three chassis internally, but outsourced a
tubular chassis to Gilco which was modified by Maserati. The first five
aluminium
Aluminium (aluminum in American and Canadian English) is a chemical element with the symbol Al and atomic number 13. Aluminium has a density lower than those of other common metals, at approximately one third that of steel. I ...
bodies were made by Celestino Fiandri, and the 23 final bodies were made by
Medardo Fantuzzi
Medardo Fantuzzi (1906–1986) was an Italian automotive engineer, known for his Carrozzeria Fantuzzi body workshop.
Life
Fantuzzi was born in Bologna in 1906 and died in Modena in 1986.
Automotive engineer
He and his brother, Gino Fantuzzi we ...
.
The 200S debuted at the 1955 Imola Grand Prix, driven
Franco Bordoni, but yielded disappointing results. The 200S was then entered at the
1955 Targa Florio driven by
Giovanni Bracco
Giovanni Bracco (6 June 1908 at Biella – 7 August 1968 at Biella) was an Italian racing car driver.
He lived in Biella, home town of other racing aces such as Mario Porrino and Lamberto Grolla. Before and after World War II he had been racing ...
and Bordoni along with a 150S. Both cars were forced to retire, with Maserati winning the race with a A6GCS driven by Francesco Giardini.
In 1956, Maserati entered three new 200S' at the Supercortemaggiore GP. Problems with the suspension would be resolved by fitting two cars with a De dion bridge attached to the differential with a sliding pin at the rear. The third car had a conventional rear axle. The first car suffered damage in practicing round while the second one would retire during the race after only one lap. The third car would finish 27 seconds behind the winning
Ferrari 250 Testa Rossa
The Ferrari 250 Testa Rossa, or 250 TR, is a racing sports car built by Ferrari from 1957 to 1961. It was introduced at the end of the 1957 racing season in response to rule changes that enforced a maximum engine displacement of 3 litres for t ...
. At the Bara GP, the car would show more promising results by winning the race outright.
In 1957 a new variant called the Maserati 200SI, ''Sport Internazionale'', was introduced to conform to international sports car racing rules. The SI featured a wider windscreen, wipers, doors and a neat hood design to keep the rain out when the car was parked rather than protecting the driver from these elements during a race. One of the 200SI (chassis 2407) was a converted 150S.
The 200S was then replaced by the 250S which featured an enlarged engine. Most of the 250S cars were 200S converted to 250S specifications: Four of the 200SI built were thus converted,
while only two were built from the ground up. The 250S also proved uncompetitive.
References
External links
maserati-alfieri.co.ukon the 200S
Literature
*
Karl Ludvigsen
Karl E. Ludvigsen (born April 24, 1934) is a journalist, author, and historian of the automotive industry and motor sports.
Personal life
Karl E. Ludvigsen was born on April 24, 1934 in Kalamazoo, Michigan. He was the son of Elliot "Lud" Ludv ...
, ''Maserati 200S/200SI''
{{Maserati
200S 200s may refer to:
* The period from 200 to 299, almost synonymous with the 3rd century (201–300)
* The period from 200 to 209, known as the 200s (decade) almost synonymous with the 21st decade (201-210)
* Chrysler 200S, a trim of the Chrysler 20 ...
Sports racing cars
sv:Maserati 150S