History
The first basic military map symbols began to be used by western armies in the decades following the end of theSymbol sets
The APP-6A standard provides common operational symbology along with details on their display and plotting to ensure the compatibility, and to the greatest extent possible, the interoperability of NATO land component ''command, control, communications, computer, and intelligence'' (C4I) systems, development, operations, and training. APP-6A addresses the efficient transmission of symbology information through the use of a standard methodology for symbol hierarchy, information taxonomy, and symbol identifiers. APP-6A recognises five broad ''sets'' of symbols, each set using its own SIDC (Symbol identification coding) scheme: *Units, equipment, and installations *Military operations (tactical graphics) *METOC (meteorological and oceanographic) *Signals intelligence *MOOTW (military operations other than war) ''Units, equipment, and installations'' consist of icons, generally framed, associated with a single point on the map. All sorts of graphical and textual modifiers may surround them, specifying categories, quantities, dates, direction of movement, etc. ''Tactical graphics'' represent operational information that cannot be presented via icon-based symbols alone: unit boundaries, special area designations, and other unique markings related to battlespace geometry and necessary for battlefield planning and management. There are point, line and area symbols in this category. ''Meteorological'' and ''oceanographic'' symbology is the only set not under the standard's control: rather, they are imported from the symbology established by theSymbol composition
Most of the symbols designate specific points, and consist of a ''frame'' (a geometric border), a ''fill'', a constituent ''icon'', and optional symbol ''modifiers''. The latter are optional text fields or graphic indicators that provide additional information. The frame provides a visual indication of the affiliation, battle dimension, and status of an operational object. The use of shape and colour is redundant, allowing the symbology to be used under less-than-ideal conditions such as a monochrome red display to preserve the operator's night vision. Nearly all symbols are highly stylised and can be drawn by persons almost entirely lacking in artistic skill; this allows one to draw a symbolic representation (a GRAPHREP, Graphical report) using tools as rudimentary as plain paper and pencil. The frame serves as the base to which other symbol components and modifiers are added. In most cases a frame surrounds an icon. One major exception is equipment, which may be represented by icons alone (in which case the icons are coloured as the frame would be). The fill is the area within a symbol. If the fill is assigned a colour, it provides an enhanced (redundant) presentation of information about the affiliation of the object. If colour is not used, the fill is transparent. A very few icons have fills of their own, which are not affected by affiliation. The icons themselves, finally, can be understood as combinations of elementary glyphs that use simple composition rules, in a manner reminiscent of some ideographic writing systems such asAllegiance and affiliation
APP-6 colour representation
The concept of affiliation does not appear in the original APP-6 as these were not introduced until APP-6A. Instead, the original APP-6 described a series of "colour representations" with the purpose of distinguishing friendly and enemy elements. *Multi-colour representation: **Blue or black for friendly icons **Red for enemy icons **Green for man-made obstacles (friendly or enemy) **Yellow for chemical, biological, radiological or nuclear events **Other colours to be established in a map legend *tri-colour representation: **Blue or black for friendly icons **Red for enemy icons **Green or yellow for man-made obstacles (friendly or enemy) and for chemical, biological, radiological or nuclear events *two colour representation: **Blue, Green, or black for friendly icons **Red for enemy icons *One colour representation: **Single line border for friendly icons **double line border for enemy icons, and unbordered icons were labeled with "EN" to the lower right cornerAPP-6A affiliation
''Affiliation'' refers to the relationship of the tracker to the operational object being represented. The basic affiliation categories are ''unknown'', ''friend'', ''neutral'', and ''hostile''. In the ground unit domain, a yellowBattle dimension
''Battle dimension'' defines the primary mission area for the operational object within the battlespace. An object can have a mission area above the Earth's surface (i.e., in the air or outer space), on it, or below it. If the mission area of an object is on the surface, it can be either on land or sea. The subsurface dimension concerns those objects whose mission area is below the sea surface (e.g., submarines and sea mines). Some cases require adjudication; for example, an Army or Marine helicopter unit is a manoeuvring unit (i.e., a unit whose ground support assets are included) and is thus represented in the land dimension. Likewise, a landing craft whose primary mission is ferrying personnel or equipment to and from shore is a maritime unit and is represented in the sea surface dimension. A landing craft whose primary mission is to fight on land, on the other hand, is a ground asset and is represented in the land dimension. Closed frames are used to denote the land and sea surface dimensions, frames open at the bottom denote the air/space dimension, and frames open at the top denote the subsurface dimension. An unknown battle dimension is possible; for example, someStatus
The ''status'' of a symbol refers to whether a warfighting object exists at the location identified (i.e., status is "present") or will in the future reside at that location (i.e., status is "planned, anticipated, suspected," or "on order"). Regardless of affiliation, present status is indicated by a solid line and planned status by a dashed line. The frame is solid or dashed, unless the symbol icon is unframed, in which case the icon itself is drawn dashed. Planned status cannot be shown if the symbol is an unframed filled icon.Icon placement
The icon is the innermost part of a symbol which, when displayed, provides an abstract pictorial or alphanumeric representation of an operational object. The icon portrays the role or mission performed by the object. APP-6A distinguishes between icons that must be framed or unframed and icons where framing is optional. APP-6A defined a standard octagon boundary within each map symbol frame. This octagon is not actually shown when symbols are drawn or rendered but, with a few defined exceptions, all icons inside the frame would also fit inside these octagons. APP-6C modified some symbol frames from previous editions of the standard. From top to bottom, here is the symbol boundary shown inside the APP-6C frames of space elements, air elements, land units, land equipment and surface sea elements, and sub-surface sea elements.Unit symbols
Unit icon modifiers
Unit symbols can be used independently as well as in combinations. There are also some symbols that cannot appear by themselves, but can only be used to modify other unit symbols:Unit basic icons
Land unit icons require a frame.Modified unit icons
Some of the most common combinations are:Unit size indicators
Above the unit symbol, a symbol representing the size of the unit can be displayed: The typical commander ranks shown in the table are for illustration. Neither the actual rank designated for a particular unit's commander, nor the rank held by the incumbent commander alters the appropriate symbol. For example, units are periodically commanded by an officer junior to the authorised commander grade, yet a company under the command of a Lieutenant (U.S.) or Captain (Commonwealth) is still indicated with two vertical ticks. Likewise, some peculiar types of companies and detachments are authorised a Major, Lieutenant Colonel (personnel services companies) or Colonel (some types of judge advocate detachments); the company or detachment is nevertheless indicated with, respectively, one vertical tick or three dots. While in Commonwealth armies, the regiment as a tactical formation does not normally exist, in some cases a regimental sized (i.e. larger than battalion and smaller than brigade) Task Force may exist where the operational requirement exists. These formations may be commanded by Colonels. Note that, for brigades and higher, the number of Xs corresponds to the number of stars in the United States military's insignia for the typical general officer grade commanding that size unit. For example, a division is capped with XX and is usually commanded by a major general the American insignia for which is two stars.Equipment icons
Equipment icons are "frame optional".Installation icons
Symbol modifiers
APP-6A stops with field AB. MIL-STD-2525B and 2525B Change 1 add a number of other modifiers.Graphic modifiers
*''Echelon'' (field B) Identifies command level (see Unit sizes, above). *''Task force'' (field D) Identifies a unit as a task force. It may be used alone or in combination with Echelon, like so: *''Frame shape modifier'' (field E) A short textual modifier that completes the affiliation, battle dimension, or exercise description of an object ("U", "?", "X", "XU", "X?", "J" or "K"). It is treated as a graphic modifier, however. *''Direction of movement'' (field Q) A fixed-length arrow that identifies the direction of movement or intended movement of an object. It emanates from the symbol's centre except in the ground domain, where it is hooked to a short offset, straight down from the symbol's base centre (see diagram). *''Mobility indicator'' (field R) Depicts the mobility of an object (see Mobility, below). It is used only with equipment. *''Headquarters staff'' or ''offset location'' (field S) Identifies a unit as a headquarters, or indicates the object's actual location on the map when it has been shifted away in order to declutter the display. It goes straight down from the symbol's centre left, then angles towards the actual location (see diagram). *''Feint/dummy'' (field AB) Identifies a unit intended to draw the enemy's attention away from the area of the main attack, or a decoy designed to fool enemy intelligence. It consists of a dashed chevron, placed above the frame, like the echelon graphic modifier (the standard is unclear as to how the two combine graphically). See Feints/Dummies, below. *''Installation'' (field AC) Identifies a particular symbol as an installation. It sits atop the frame. See Installations, below. *''Auxiliary equipment'' (field AG) Indicates the presence of a towed sonar array (used exclusively in the sea surface or subsurface battle dimensions). It sits below the frame, like field R (see Auxiliary equipment, below). *''Area of uncertainty'' (field AH) Indicates the area where an object is most likely to be, based on the object's last report and the reporting accuracy of the sensor that detected it. This can take various forms, such as an ellipse, a bounding box, or lines indicating probable bearing and distance. *''Dead reckoning trailer'' (field AI) Identifies where an object should be located at present, given its last reported course and speed. This can take the form of a dotted line (extending from the symbol to the dead-reckoned position) or a dotted circle (bounding the zone the object may have reached since, when the direction of movement is unknown or uncertain). *''Speed leader'' (field AJ) Depicts the speed and direction of movement of an object. It is identical to the Direction of Movement indicator except that its length is variable (and there is no arrow head). *''Pairing line'' (field AK) Connects two objects.Feints/dummies and installations
Source:Mobility and auxiliary equipment
Source:Text modifiers
* Quantity (field C) Identifies the number of equipment items present. * Reinforced or reduced (field F) Displays (+) for reinforced, (-) for reduced, (±) for reinforced and reduced. * Staff comments (field G) * Additional information (field H) * Evaluation rating (field J) A letter-and-number reliability and credibility rating, assigned by Intelligence. * Combat effectiveness (field K) * Signature equipment (field L) Used for hostile equipment; "!" indicates a detectable electronic signature. * Higher formation (field M) Number or title of higher echelon command. ** field M of this company symbol shows that it belongs to the 42nd Armored Infantry Battalion: * Hostile (enemy) (field N) "ENY" denotes hostile equipment. * IFF/SIF (field P) IFF/SIF Identification modes and codes. * SIGINT mobility indicator (field R2) "M" for Mobile, "S" for Static, "U" for Uncertain. * Unique designation (field T) ** field T shows this is Alpha Company: * Type (field V) * Date/time group (DTG) (field W) Indicates the symbol's date and time stamp. * Altitude/height/depth (field X) * Location (field Y) Location in degrees, minutes, and seconds (or in UTM or other applicable display format). * Speed (field Z) Velocity as set forth in MIL-STD-6040. * Special C2 headquarters (field AA) * Platform type (field AD) "ELNOT" (Electronic Intelligence Notation) or "CENOT" (Communications Intelligence Notation) * Equipment teardown time (field AE) In minutes. * Common identifier (field AF) Example: "Hawk" for a Hawk SAM system.Other information
APP-6 organization chart of theMIL-STD-2525A
APP-6A, ''Military Symbols for Land Based Systems'' was developed directly from MIL-STD-2525A, ''Common Warfighting Symbology''. MIL-STD 2525A was the American standard for military symbols. The custodian of APP-6 is the United States. APP-6(A) remained unchanged as work on harmonizing it with ADatP-3, ''NATO Message Text Formatting System'' was carried out. In 1999, APP-6 was moved from the Army Service Board to the Joint Service Board. With this move, APP-6 was placed under the Information Exchange Requirements Harmonization/Message Text Format Working Group. The IERH/MTFWG then formed the Joint Symbology Panel to provide configuration management of APP-6 with the US custodian as the chairman. With the ratification and promulgation of APP-6(B) in 2008, the named was changed to ''NATO Military Symbology'' to better reflect the nature of the publication. In 2011, with the introduction of APP-6(C), the named was changed to ''NATO Joint Military Symbology''. The US military required new symbols to support ongoing operations in Iraq and Afghanistan, so the pace of change between APP-6 and MIL-STD-2525 remained uneven until 2009. In 2009, a new chairman for DOD Symbology Standardization Management Committee was appointed, and the two configuration management organizations began to work together. The two organizations held joint meetings with full participation on both sides. The goal of both groups is to develop comprehensive joint military symbology that is common to both organizations to the greatest extent possible. APP-6(C) began the process of changing the format of the publications and introduced new symbol identification codes. MIL-STD-2525D has carried that one step further with more symbols and more symbol sets derived from recent NATO and US operations. MIL-STD-2525D will serve as the base document for APP-6(D) as the two documents move closer together.References
External links
{{Commons, NATO Military Map Symbols