MDBPB

DriveSpace (initially known as DoubleSpace) is a disk compression utility supplied with MS-DOS starting from version 6.0 in 1993 and ending in 2000 with the release of Windows Me. The purpose of DriveSpace is to increase the amount of data the user could store on disks by transparently compressing and decompressing data on-the-fly. It is primarily intended for use with hard drives, but use for floppy disks is also supported. This feature was removed in Windows XP and later.

Overview

In the most common usage scenario, the user would have one hard drive in the computer, with all the space allocated to one partition (usually as drive C:). The software would compress the entire partition contents into one large file in the root directory. On booting the system, the driver would allocate this large file as drive C:, enabling files to be accessed as normal.

Microsoft's decision to add disk compression to MS-DOS 6.0 was influenced by the fact that the competing DR DOS had earlier started to include disk compression software since version 6.0 in 1991.

Instead of developing its own product from scratch, Microsoft licensed the technology for the DoubleDisk product developed by Vertisoft and adapted it to become DoubleSpace. For instance, the loading of the driver controlling the compression/decompression (DBLSPACE.BIN) became more deeply integrated into the operating system (being loaded through the undocumented pre-load API even before the CONFIG.SYS file).

Microsoft had originally sought to license the technology from Stac Electronics, which had a similar product called Stacker, but these negotiations had failed. Microsoft was later successfully sued for patent infringement by Stac Electronics for violating some of its compression patents. During the court case Stac Electronics claimed that Microsoft had refused to pay any money when it attempted to license Stacker, offering only the possibility for Stac Electronics to develop enhancement products.

Consumption and compatibility

A few computer programs, particularly games, were incompatible with DoubleSpace because they effectively bypassed the DoubleSpace driver. DoubleSpace also consumed a significant amount of conventional memory, making it difficult to run memory-intensive programs.

Bugs and data loss

Shortly after its release, reports of data loss emerged. A company called Blossom Software claimed to have found a bug that could lead to data corruption. The bug occurred when writing files to heavily fragmented disks and was demonstrated by a program called BUST.EXE. The company sold a program called DoubleCheck that could be used to check for the fragmentation condition that could lead to the error. Microsoft's position was that the error only occurred under unlikely conditions, but fixed the problem in MS-DOS 6.2.

The fragmentation condition was related to the way DoubleSpace compresses individual clusters (of size, say, 8K), and fits them on the disk, occupying fewer sectors (size 512 bytes) than the fixed number required without DoubleSpace (16 sectors in this example). This created the possibility of a kind of internal fragmentation issue, where DoubleSpace would be unable to find enough consecutive sectors for storing a compressed cluster even if plenty of space was available.

Other potential causes of data loss included the corruption of DoubleSpace's memory areas by other programs, DoubleSpace's memory areas were not protected, because MS-DOS ran in real mode. Microsoft attempted to remedy this in the MS-DOS 6.2 version of DoubleSpace (via a feature called ''DoubleGuard'' that would check for such corruption).

The fact that the compressed contents of a compressed drive was stored in a single file implied the possibility of a user accidentally deleting all of their data by deleting just that file. This could happen if the user inadvertently got access to the host drive, containing this file. The host drive was usually mapped to the letter H: by the compression driver. However, if the compression driver had failed to load the user might see it as drive C:.

Turning off the computer before DoubleSpace could finish updating its data structures could also result in data loss. This problem was compounded by Microsoft making write caching enabled by default in the SMARTDRV disk cache software that came with MS-DOS 6.0. Because of this change, after exiting an application, the MS-DOS prompt might appear before all data had been written to the disk. However, due to the lack of a controlled shutdown procedure (as found in modern operating systems), many users saw the appearance of the MS-DOS prompt as an indication that it was safe to switch off the computer, which was typically the case prior to MS-DOS 6.0.
Microsoft addressed this issue in MS-DOS 6.2 where the write caching was still enabled by default, but where the cache would be flushed before allowing the command prompt to reappear.

Add-ons

AddStor, Inc. offered an add-on product called Double Tools for DoubleSpace. It contained a number of tools to enhance the functions of the version of DoubleSpace that came with MS-DOS 6.0. This included various diagnostic features, the ability to have compressed removable media auto-mounted as they were used, as well as support for background defragmentation of DoubleSpace compressed drives.
To defragment files in the background, it was possible to let DoubleTools replace the low-level DoubleSpace driver (DBLSPACE.BIN) with one supplied by DoubleTools. Replacing the driver also enabled other enhanced functionality of the product, such as the use of 32-bit code paths when it detected an Intel 80386

HOME


Content is Copyleft
Website design, code, and AI is Copyrighted (c) 2014-2017 by Stephen Payne


Consider donating to Wikimedia



As an Amazon Associate I earn from qualifying purchases