The M47 bomb was a chemical bomb designed during World War II for use by the U.S. Army Air Forces.BOMB, CHEMICAL, 100-POUND M47 SERIES
,

U.S. Army Corps of Engineers , colors = , anniversaries = 16 June (Organization Day) , battles = , battles_label = Wars , website = , commander1 = ...

, Fort Worth District, accessed January 3, 2009.

Design

The bomb was designed for

aerial bombardment An airstrike, air strike or air raid is an offensive operation carried out by aircraft. Air strikes are delivered from aircraft such as blimps, balloons, fighters, heavy bombers, ground attack aircraft, attack helicopters and drones. The offic ...

and maximum efficiency after being dropped. Therefore, the bomb had a very thin metal sheet as its only cover, as little as . The bomb is approximately in diameter, with a nose the shape of a hemisphere. The M107 bomb fuse at the nose of the bomb detonated the weapon, allowing for the release of the contents inside. The bomb was designed to carry either

white phosphorus Elemental phosphorus can exist in several allotropes, the most common of which are white and red solids. Solid violet and black allotropes are also known. Gaseous phosphorus exists as diphosphorus and atomic phosphorus. White phosphorus White ...

(WP) or a

mustard agent Mustard gas or sulfur mustard is a chemical compound belonging to a family of cytotoxic and blister agents known as mustard agents. The name ''mustard gas'' is technically incorrect: the substance, when dispersed, is often not actually a gas, ...

(H). However, the H bomb filler was found to leak from the bomb when loaded, and the M47 and its variant M47A1 were not allowed to be loaded. This was due to the thin steel walls on the weapon. In storage and handling, both corrosion and rough handling were found to cause the bomb to leak. When the bomb is loaded with the chemical filler H, it weighed approximately , of which are from H. The M47 bomb could also be used as an

incendiary device Incendiary weapons, incendiary devices, incendiary munitions, or incendiary bombs are weapons designed to start fires or destroy sensitive equipment using fire (and sometimes used as anti-personnel weaponry), that use materials such as napalm, th ...

.Morgan, Stephen L
Chemical Warfare: History and Chemistry
, '' University of South Carolina'', Department of Chemistry and Biochemistry, accessed January 3, 2009.McArthur, Charles W. ''Operations Analysis in the U.S. Army Eighth Air Force in World War II'',
Google Books
, American Mathematical Society, 1990, p. 65, (). A mixture of rubber and gasoline could be used in the field to produce a crude incendiary bomb. A mixture of white phosphorus and jelled gasoline also produced a flammable mixture. Other mixtures included: LA-60 in which crude latex was combined with caustic soda, coconut oil, and water, crepe rubber (CR) in which crude latex reduced to a solid by precipitation and kneading, LA-100 in which crude latex was dried until it was 100% solid, smoked rubber sheets (SR) in which crude latex that has been dried over a fire until it is 100% solid. When used with these fillers, the bomb used a black powder charge to ignite and scatter the incendiary materials. The bomb typically weighed about when the incendiary fillers are used.

Variants

The M47A1 was designed to replace the M47. It has a thicker steel cover that is about thick and an acid resistant corrosion cover inside.
The M47A2 was designed to fix the leaking problems of the M47 when the agent H was carried. On the inside it was coated with a special oil that protected against corrosion from the agent H.

References

{{U.S. chemical weapons Chemical weapon delivery systems World War II aerial bombs of the United States Cold War aerial bombs of the United States Chemical weapons of the United States Military equipment introduced in the 1940s

Design

Variants

See also

References