The Model of 1905 bayonet was made for the U.S.
M1903 Springfield rifle
The M1903 Springfield, officially the United States Rifle, Caliber .30-06, Model 1903, is an American five-round magazine-fed, bolt-action service repeating rifle, used primarily during the first half of the 20th century.
The M1903 was first u ...
.
[Note: Variants of the M1903 rifle were produced during World War I and World War II by ]Springfield Armory
The Springfield Armory, more formally known as the United States Armory and Arsenal at Springfield located in the city of Springfield, Massachusetts, was the primary center for the manufacture of United States military firearms from 1777 until ...
, Remington Arms
Remington Arms Company, LLC was an American manufacturer of firearms and ammunition, now broken into two companies, each bearing the Remington name. The firearms manufacturer is ''Remington Arms''. The ammunition business is called ''Remingto ...
, Rock Island Arsenal
The Rock Island Arsenal comprises , located on Arsenal Island, originally known as Rock Island, on the Mississippi River between the cities of Davenport, Iowa, and Rock Island, Illinois. It lies within the state of Illinois. Rock Island ...
, and Smith-Corona
Smith Corona is an American manufacturer of thermal labels, direct thermal labels, and thermal ribbons used in warehouses for primarily barcode labels. Once a large U.S. typewriter and mechanical calculator manufacturer, it expanded aggressively ...
Typewriter. This designation was changed to Model 1905 in 1917, and then to M1905 in 1925, when the army adopted the ''M'' designation nomenclature. The M1905 bayonet has a 16-inch (40.6 cm) steel blade and a 4-inch (10.16 cm) handle with wooden or plastic grips. The bayonet also fits the U.S.
M1 Garand
The M1 Garand or M1 rifleOfficially designated as U.S. rifle, caliber .30, M1, later simply called Rifle, Caliber .30, M1, also called US Rifle, Cal. .30, M1 is a semi-automatic rifle that was the service rifle of the U.S Army during World War ...
rifle. From 1943 to 1945, a shorter, 10-inch (25.4 cm), bladed version was produced with black or dark red molded plastic grips, and designated the M1 bayonet. A number of M1905 bayonets were recalled from service, their blades cut down, and reissued as M1 bayonets.
M1905 bayonet
![US M1905-42 Bayonet and Scabbard Photo 1 of 2](https://upload.wikimedia.org/wikipedia/commons/8/85/US_M1905-42_Bayonet_and_Scabbard_Photo_1_of_2.jpg)
The M1905 bayonet was produced from 1906 to 1922 by Springfield Armory and Rock Island Arsenal. The blade and handle frame were forged as a single piece with a wide, square-shaped
fuller, and the crossguard was pinned to this assembly through two holes with cone-shaped steel pins. The ribbed hand grips were made of
walnut wood and attached to the handle with a screw. The screw also held the catch mechanism, manipulated with a button under the crossguard, that was used to fix the bayonet to the rifle's
bayonet lug
A bayonet lug is a standard feature on most military muskets, rifles, and shotguns, and on some civilian longarms. It is intended for attaching a bayonet, which is typically a long spike or thrusting knife. The bayonet lug is the metal mount t ...
. In mid-1941, it was decided to restart production of the M1905 bayonet. To simplify production, these later bayonets had handles with black or dark red ribbed grips, made of
phenol formaldehyde resin
Phenol formaldehyde resins (PF) or phenolic resins (also infrequently called phenoplasts) are synthetic polymers obtained by the reaction of phenol or substituted phenol with formaldehyde. Used as the basis for Bakelite, PFs were the first commerc ...
, the earliest type of synthetic plastic. Production was scheduled to begin in January 1942, but the first bayonets were not delivered until April, with quantity deliveries not beginning until the summer of 1942. Despite initial setbacks, the M1905 bayonet was manufactured in sufficient numbers to keep up with the widespread introduction of the new
M1 Garand rifle
The M1 Garand or M1 rifleOfficially designated as U.S. rifle, caliber .30, M1, later simply called Rifle, Caliber .30, M1, also called US Rifle, Cal. .30, M1 is a semi-automatic rifle that was the service rifle of the U.S Army during World War ...
in 1942. By the end of 1942, all six manufacturers had changed the shape of their fullers to a narrower, round-bottomed shape. The later version of the M1905 bayonet with plastic grips is sometimes referred to as the "M1942" by collectors and historians, but this designation was never used by the Army.
M1 bayonet
![World-War-II-US-Military-Bayonets](https://upload.wikimedia.org/wikipedia/commons/1/13/World-War-II-US-Military-Bayonets.jpg)
After testing in early 1943, the U.S. Army decided to shorten the M1905 bayonet's blade to 10 inches (25.4 cm). Production of this new bayonet, designated the M1, began at the five remaining manufacturers by April 1943. Because of quality control issues and problems meeting delivery expectations, Wilde Drop Forge and Tool was dropped from the bayonet production program after finishing their run of M1905 bayonets. As many of the M1905 bayonets already in service as possible were recalled, their blades were cut down, and they were reissued; roughly 1 million bayonets underwent this process. The first shortened bayonets were delivered in September 1943, and deliveries continued at a rate of 40-50,000 per month until August 1945.
The points were either shortened to a "spear" or "beak" point, the latter being used most often on the early M1905 bayonets with a square fuller to give extra strength to the tip of the blade. Oneida was dropped from the bayonet program altogether in November 1943 after it asked the War Department to be released, as it could not keep its workers steadily employed because of the erratic nature of recalling bayonets for shortening. Utica and Pal Blade and Tool were released from shortening in 1944. American Fork and Hoe and Union Fork and Hoe then took over the duty of shortening M1905 bayonets. These shortened bayonets were re-designated as M1; all ten-inch bladed bayonets, whether new production M1 or cut-down M1905, were officially referred to as M1 bayonets, and the Army made no distinction between the two when issuing them.
These shortened bayonets functioned well in the European theater, where in the rare bayonet actions of the time they were matched up against the 9-inch long blade of the German S84/98 III bayonet fitted on the
Karabiner 98k
The Karabiner 98 kurz (; "carbine 98 short"), often abbreviated Karabiner 98k, Kar98k or K98k and also sometimes incorrectly referred to as a K98 (a K98 is a Polish carbine and copy of the Kar98a), is a bolt-action rifle chambered for the 7.92×5 ...
rifle. However, in the Pacific theater, the Japanese used the much longer, 15.75 inch (40.0 cm)-bladed
Type 30 sword bayonet on the already very long
Arisaka
The Arisaka rifle ( ja, 有坂銃, Arisaka-jū) is a family of Japanese military bolt-action service rifles, which were produced and used since approximately 1897, when it replaced the Murata rifle (, ) family, until the end of World War II in ...
rifle, which caused many American troops to retain the longer, unmodified M1905 bayonet.
Production
Scabbards
![USMC-060920-M-8136F-004](https://upload.wikimedia.org/wikipedia/commons/c/ce/USMC-060920-M-8136F-004.jpg)
The original M1905 scabbard had a wooden body with a rawhide cover and employed a wire belt-hanger which went over and around the belt. The M1910 scabbard was covered in canvas with a leather tip to prevent the blade tip from tearing the material. A wire hook that engaged grommets on the cartridge belt replaced the belt-hanger. The M1910 scabbard was the primary scabbard used during the First World War. Earlier M1905 scabbards were modified by replacing the belt-hanger with a belt hook. A green leather-bodied M1917 scabbard (designed for the
M1917 bayonet
The M1917 bayonet was designed to be used with the US M1917 Enfield .30 caliber rifle, as well as with the seven different U.S. trench shotguns. The blade was long. It will not fit the M1903 .30 caliber (Springfield) or the M1 .30 caliber (Ga ...
) was approved as a substitute for the M1905 bayonet scabbard.
A new scabbard, the M3, was developed early in the Second World War to replace these earlier scabbards. The M3 scabbard had a body made of resin-impregnated cotton duck canvas with a metal throat, and was equipped with a wire hook hanger.
[Canfield, Bruce N.; ''Bayonet Scabbards for U.S. M1903 Springfields''; "American Rifleman;" September 2009; p.48] The M1905 bayonet had a tendency to rattle inside the scabbard, and so ribs were molded into the scabbard tip to hold the blade. When production of the M1 bayonet began in 1943, a new scabbard, the M7 (otherwise identical in construction to the M3) was developed that used
spring steel
Spring steel is a name given to a wide range of steels used in the manufacture of different products, including swords, saw blades, springs and many more. These steels are generally low-alloy manganese, medium-carbon steel or high-carbon stee ...
plates in the scabbard throat to hold the blade instead of the molded ribs. As a part of the bayonet-shortening program, M3 scabbards were also recalled for modification. The tabs which held the body to the throat were bent outward, the body was removed and shortened, and then reinserted into the throat and the tabs bent back. Since the tabs had a tendency to break off when being bent during the shortening process, later shortened scabbards had the tabs removed, short V-shaped cuts were made in the sides of the throat, and it was crimped onto the shortened body using a special tool.
See also
*
List of individual weapons of the U.S. Armed Forces
*
M3 fighting knife
The M3 trench knife or M3 fighting knife was an American military combat knife first issued in March 1943. The M3 was originally designated for issue to soldiers not otherwise equipped with a bayonet.Trzaska, Frank, (1996), U.S. Fighting Knives o ...
*
M4 bayonet
The M4 bayonet was introduced in 1944 for use with the M1 carbine. It was built on the M3 fighting knife.
Description
The M4 bayonet, like the M3 fighting knife that preceded it, was designed for rapid production using a minimum of strategic met ...
*
M5 bayonet
*
M6 bayonet
*
M7 bayonet
The M7 bayonet (NSN 1095-00-017-9701) is a bayonet that was used by the U.S. military for the M16 rifle, it can also be used with the M4 carbine as well as many other assault rifles, carbines and combat shotguns. It can be used as a fighting knif ...
*
M9 bayonet
The M9 Bayonet, officially known as the M9 Phrobis III, is a multi-purpose knife and bayonet officially adopted in 1986 by the United States. It has a blade and is issued with a sheath designed to double as a wire cutter.
History
The M9 bayon ...
References
External links
Olive Drab
{{DEFAULTSORT:M1905 bayonet
Bayonets of the United States
World War I infantry weapons of the United States
World War II infantry weapons of the United States