Lithium iridate, Li₂IrO₃, is a chemical compound of

lithium Lithium (from el, λίθος, lithos, lit=stone) is a chemical element with the symbol Li and atomic number 3. It is a soft, silvery-white alkali metal. Under standard conditions, it is the least dense metal and the least dense solid ...

iridium Iridium is a chemical element with the symbol Ir and atomic number 77. A very hard, brittle, silvery-white transition metal of the platinum group, it is considered the second-densest naturally occurring metal (after osmium) with a density of ...

and oxygen. It forms black crystals with three slightly different layered atomic structures, α, β, and sometimes γ. Lithium iridate exhibits metal-like, temperature-independent electrical conductivity, and changes its magnetic ordering from

paramagnetic Paramagnetism is a form of magnetism whereby some materials are weakly attracted by an externally applied magnetic field, and form internal, induced magnetic fields in the direction of the applied magnetic field. In contrast with this behavior, ...

antiferromagnetic In materials that exhibit antiferromagnetism, the magnetic moments of atoms or molecules, usually related to the spins of electrons, align in a regular pattern with neighboring spins (on different sublattices) pointing in opposite directions. ...

upon cooling to 15 K.

Structure

Li₂IrO₃ typically crystallizes in the α or β phase, and a rare γ phase has been reported. The crystal structure of α-Li₂IrO₃ consists of an alternate stacking of hexagonal Li layers and honeycombs of edge-sharing IrO₆ octahedra with Li in the center. The offset in adjacent layers results in a relatively low (monoclinic) crystal symmetry. Li₂IrO₃ crystals have abundant twinning defects where the ''ab'' crystal planes are rotated by 120° around the ''c'' axis.

Synthesis

Li₂IrO₃ crystals can be grown by direct

sintering Clinker nodules produced by sintering Sintering or frittage is the process of compacting and forming a solid mass of material by pressure or heat without melting it to the point of liquefaction. Sintering happens as part of a manufacturing ...

of Ir and Li metals, which both oxidize during heating in ambient atmosphere. The α phase is formed at 750–1050 °C, while heating to higher temperatures results in the β phase. The use of Li metal instead of more traditional lithium carbonate, which is easier to handle and store, results in larger crystals. The γ phase can be obtained by the calcination of lithium carbonate and iridium(IV) oxide, followed by annealing in molten

lithium hydroxide Lithium hydroxide is an inorganic compound with the formula LiOH. It can exist as anhydrous or hydrated, and both forms are white hygroscopic solids. They are soluble in water and slightly soluble in ethanol. Both are available commercially. While ...

at 700–800 °C.

Properties

Lithium iridate is black in color and has a relatively high, temperature-independent electrical conductivity characteristic of metals. Its both α and β phases exhibit the Kitaev exchange coupling between magnetic spins originating from Ir⁴⁺ ions. These spins form an antiferromagnetic lattice at temperatures below 15 K (

Néel temperature In physics and materials science, the Curie temperature (''T''C), or Curie point, is the temperature above which certain materials lose their permanent magnetic properties, which can (in most cases) be replaced by induced magnetism. The Cur ...

, ''T''_N), while the material is paramagnetic above ''T''_N.

Potential applications

Lithium iridate is a potential electrode material for the

lithium-ion battery A lithium-ion or Li-ion battery is a type of rechargeable battery which uses the reversible reduction of lithium ions to store energy. It is the predominant battery type used in portable consumer electronics and electric vehicles. It also s ...

. This application is hindered by the high costs of Ir, as compared to the cheaper Li₂MnO₃ alternative.

References

{{Iridium compounds Lithium compounds Iridium compounds Transition metal oxyanions Oxometallates