![2008 01 15 Kamera 0003](https://upload.wikimedia.org/wikipedia/commons/6/67/2008_01_15_Kamera_0003.jpg)
The Minolta Vectis S-series comprises two
APS system models of film
SLR cameras made by
Minolta, the flagship model Vectis S-1 and the Vectis S-100. The cameras feature a compact design, owing to the use of mirrors instead of
prism
Prism usually refers to:
* Prism (optics), a transparent optical component with flat surfaces that refract light
* Prism (geometry), a kind of polyhedron
Prism may also refer to:
Science and mathematics
* Prism (geology), a type of sedimentary ...
s in the
viewfinder
In photography, a viewfinder is what the photographer looks through to compose, and, in many cases, to focus the picture. Most viewfinders are separate, and suffer parallax, while the single-lens reflex camera lets the viewfinder use the main ...
.
Only one early
DSLR camera
A digital single-lens reflex camera (digital SLR or DSLR) is a digital camera that combines the optics and the mechanisms of a single-lens reflex camera with a digital imaging sensor.
The reflex design scheme is the primary difference between a ...
body, the
Minolta Dimâge RD 3000, also used the V-lens mount.
The Vectis brand was also shared with a number of small APS
rangefinder cameras with fixed lenses, including the waterproof Vectis Weathermatic and Vectis GX series. The model numbers of these cameras don't include the S prefix used for the SLR series.
Vectis V mount
The Vectis V mount lenses used by the above models are not compatible with any other lens mount, including Minolta's 35mm
A-mount and
SR-mount
The Minolta SR-mount was the bayonet mounting system used in all 35 mm SLR cameras made by Minolta with interchangeable manual focusing lenses. Several iterations of the mounting were produced over the decades, and as a result, the mount itself wa ...
systems. Aperture and focus are controlled electronically by the camera; the image circle of the lenses only illuminates the APS formats, and the
flange focal distance
For an interchangeable lens camera, the flange focal distance (FFD) (also known as the flange-to-film distance, flange focal depth, flange back distance (FBD), flange focal length (FFL), back focus or register, depending on the usage and sourc ...
of V mount is only 36.00 mm.
There are thus only limited options to adapt V mount lenses to other cameras. A small hand-production run of an adapter was made for Vectis-to-Sony NEX. As of 2020, the Chinese-made "MonsterAdapter LA-VE1" allows using V mount lenses on Sony E mount cameras, offering aperture control, focal length detection for both EXIF and IBIS, and manual-only focus. It is sold sporadically on online marketplaces, priced at US$199. A new version, the "MonsterAdapter LA-VE2", appeared as a crowd funded item on Indiegogo and offers the benefits of the LA-VE1 plus the added bonus of auto-focus. This new adaptor was offered in September of 2022. It is fully compatible with newer E mount Sony cameras and offers limited compatibility with older E mount cameras.
Lenses
List of V-mount interchangeable lenses:
*Prime lenses
**V 17 mm 3.5 RD (#2764)
**V 50 mm 3.5 Macro (1:2) (#2305)
**V 400 mm 8 Reflex (#2307)
*Zooms
**V 22–80 mm 4-5.6 (#2301)
**V 25–150 mm 4.5-6.3 (#2309)
**V 28–56 mm 4-5.6 (#2303)
**V 56–170 mm 4.5-5.6 (#2304)
**V 80–240 mm 4.5-5.6 Apo (#2302)
The 17 mm lens is specified to work with the RD 3000 only, but can be used on the S-1 and S-100 as well.
The 400 mm reflex lens as well as the 25–150 mm and 56–170 mm zooms may not perform to their full potential on the RD 3000, however.
At least the 400 mm lens illuminates the full frame format, albeit with soft vignette typical for refractive designs.
References
Information about the Vectis S-1 and S-100
Vectis S series
{{photography-stub