This is a list of published
[This list generally excludes draft versions.] International Organization for Standardization
The International Organization for Standardization (ISO ) is an international standard development organization composed of representatives from the national standards organizations of member countries. Membership requirements are given in Ar ...
(ISO)
standards Standard may refer to:
Symbols
* Colours, standards and guidons, kinds of military signs
* Standard (emblem), a type of a large symbol or emblem used for identification
Norms, conventions or requirements
* Standard (metrology), an object th ...
and other deliverables.
[ISO deliverables]
include "specifications" (ISO/PAS, ISO/TS), "reports" (ISO/TR), etc, which are not referred to by ISO as "standards". For a complete and up-to-date list of all the ISO standards, see the ISO catalogue.
The standards are protected by
copyright
A copyright is a type of intellectual property that gives its owner the exclusive right to copy, distribute, adapt, display, and perform a creative work, usually for a limited time. The creative work may be in a literary, artistic, education ...
and most of them must be purchased. However, about 300 of the standards produced by ISO and
IEC
The International Electrotechnical Commission (IEC; in French: ''Commission électrotechnique internationale'') is an international standards organization that prepares and publishes international standards for all electrical, electronic and r ...
's Joint Technical Committee 1 (
JTC 1
ISO/IEC JTC 1, entitled "Information technology", is a joint technical committee (JTC) of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). Its purpose is to develop, maintain and pr ...
) have been made freely and publicly available.
ISO 30000 – ISO 39999
* ISO 30000:2009 Ships and marine technology – Ship recycling management systems – Specifications for management systems for safe and environmentally sound ship recycling facilities
* ISO 30002:2012 Ships and marine technology – Ship recycling management systems – Guidelines for selection of ship recyclers (and pro forma contract)
* ISO 30003:2009 Ships and marine technology – Ship recycling management systems – Requirements for bodies providing audit and certification of ship recycling management
* ISO 30004:2012 Ships and marine technology – Ship recycling management systems – Guidelines for the implementation of ISO 30000
* ISO 30005:2012 Ships and marine technology – Ship recycling management systems – Information control for hazardous materials in the manufacturing chain of shipbuilding and ship operations
* ISO 30006:2010 Ship recycling management systems – Diagrams to show the location of hazardous materials onboard ships
* ISO 30007:2010 Ships and marine technology – Measures to prevent asbestos emission and exposure during ship recycling
* ISO 30042:2019 Management of terminology resources —
TermBase eXchange
TermBase eXchange (TBX) is an international standard (ISO 30042:2019) for the representation of structured concept-oriented terminological data, copublished by ISO and the Localization Industry Standards Association (LISA).ISO 30042:2008: Systems t ...
(TBX)
*
ISO/IEC 30071 Information technology — Development of user interface accessibility
** ISO/IEC 30071-1:2019 Part 1: Code of practice for creating accessible ICT products and services
* ISO/IEC 30100 Information technology – Home network resource management
** ISO/IEC 30100-1:2016 Part 1: Requirements
** ISO/IEC 30100-2:2016 Part 2: Architecture
** ISO/IEC 30100-3:2016 Part 3: Management application
* ISO/IEC 30101:2014 Information technology – Sensor networks: Sensor network and its interfaces for smart grid system
* ISO/IEC TR 30102:2012 Information technology – Distributed Application Platforms and Services (DAPS) – General technical principles of Service Oriented Architecture
* ISO/IEC TS 30103:2015 Software and Systems Engineering – Lifecycle Processes – Framework for Product Quality Achievement
* ISO/IEC TS 30104:2015 Information Technology – Security Techniques – Physical Security Attacks, Mitigation Techniques and Security Requirements
* ISO/IEC 30105 Information technology – IT Enabled Services-
Business Process Outsourcing
Outsourcing is an agreement in which one company hires another company to be responsible for a planned or existing activity which otherwise is or could be carried out internally, i.e. in-house, and sometimes involves transferring employees and ...
(
ITES-BPO) lifecycle processes
** ISO/IEC 30105-1:2016 Part 1:
Process reference model (PRM)
** ISO/IEC 30105-2:2016 Part 2: Process assessment model (PAM)
** ISO/IEC 30105-3:2016 Part 3: Measurement framework (MF) and organization maturity model (OMM)
** ISO/IEC 30105-4:2016 Part 4: Terms and concepts
** ISO/IEC 30105-5:2016 Part 5: Guidelines
* ISO/IEC 30106 Information technology – Object oriented BioAPI
** ISO/IEC 30106-1:2016 Part 1: Architecture
** ISO/IEC 30106-2:2016 Part 2: Java implementation
** ISO/IEC 30106-3:2016 Part 3: C# implementation
* ISO/IEC 30107 Information technology – Biometric presentation attack detection
** ISO/IEC 30107-1:2016 Part 1: Framework
** ISO/IEC 30107-3:2017 Part 3: Testing and reporting
* ISO/IEC 30108 Information technology – Biometric Identity Assurance Services
** ISO/IEC 30108-1:2015 Part 1: BIAS services
* ISO/IEC TR 30109:2015 Information technology – User interfaces – Worldwide availability of personalized computer environments
* ISO/IEC TR 30110:2015 Information technology – Cross jurisdictional and societal aspects of implementation of biometric technologies – Biometrics and children
* ISO/IEC 30111:2013 Information technology – Security techniques – Vulnerability handling processes
* ISO/IEC TR 30112:2014 Information technology – Specification methods for cultural conventions
* ISO/IEC 30113 Information technology – Gesture-based interfaces across devices and methods
[The exact wording of this title varies between parts. This is the wording of the most recently published part.]
** ISO/IEC 30113-1:2015 Part 1: Framework
** ISO/IEC 30113-11:2017 Part 11: Single-point gestures for common system
* ISO/IEC TR 30114 Information technology – Extensions of Office Open XML file formats
** ISO/IEC TR 30114-1:2016 Part 1: Guidelines
** ISO/IEC 30114-2:2018 Part 2: Character repertoire checking
* ISO/IEC 30116:2016 Information technology – Automatic identification and data capture techniques – Optical Character Recognition (OCR) quality testing
* ISO/IEC TR 30117:2014 Information technology – Guide to on-card biometric comparison standards and applications
* ISO/IEC 30121:2015 Information technology – Governance of digital forensic risk framework
* ISO/IEC 30122 Information technology – User interfaces – Voice commands
** ISO/IEC 30122-1:2016 Part 1: Framework and general guidance
** ISO/IEC 30122-2:2017 Part 2: Constructing and testing
** ISO/IEC 30122-3:2017 Part 3: Translation and localization
** ISO/IEC 30122-4:2016 Part 4: Management of voice command registration
* ISO/IEC TR 30125:2016 Information technology – Biometrics used with mobile devices
* ISO/IEC 30128:2014 Information technology – Sensor networks – Generic Sensor Network Application Interface
* ISO/IEC 30129:2015 Information technology – Telecommunications bonding networks for buildings and other structures
* ISO/IEC 30130:2016 Software engineering – Capabilities of software testing tools
* ISO/IEC TR 30132 Information technology – Information technology sustainability – Energy efficient computing models
** ISO/IEC TR 30132-1:2016 Part 1: Guidelines for energy effectiveness evaluation
* ISO/IEC 30134 Information technology – Data centres – Key performance indicators
** ISO/IEC 30134-1:2016 Part 1: Overview and general requirements
** ISO/IEC 30134-2:2016 Part 2:
Power usage effectiveness Power usage effectiveness (PUE) is a ratio that describes how efficiently a computer data center uses energy; specifically, how much energy is used by the computing equipment (in contrast to cooling and other overhead that supports the equipment).
...
(PUE)
** ISO/IEC 30134-3:2016 Part 3: Renewable energy factor (REF)
* ISO/IEC TS 30135 Information technology – Digital publishing –
EPUB3
** ISO/IEC TS 30135-1:2014 Part 1: EPUB3 Overview
** ISO/IEC TS 30135-2:2014 Part 2: Publications
** ISO/IEC TS 30135-3:2014 Part 3: Content Documents
** ISO/IEC TS 30135-4:2014 Part 4: Open Container Format
** ISO/IEC TS 30135-5:2014 Part 5: Media Overlay
** ISO/IEC TS 30135-6:2014 Part 6: EPUB Canonical Fragment Identifier
** ISO/IEC TS 30135-7:2014 Part 7: EPUB3 Fixed-Layout Documents
* ISO/IEC 30170:2012 Information technology – Programming languages –
Ruby
A ruby is a pinkish red to blood-red colored gemstone, a variety of the mineral corundum ( aluminium oxide). Ruby is one of the most popular traditional jewelry gems and is very durable. Other varieties of gem-quality corundum are called sa ...
* ISO/IEC 30182:2017 Smart city concept model – Guidance for establishing a model for data interoperability
* ISO/IEC 30190:2016 Information technology – Digitally recorded media for information interchange and storage – 120 mm Single Layer (25,0 Gbytes per disk) and Dual Layer (50,0 Gbytes per disk)
BD Recordable disk
* ISO/IEC 30191:2015 Information technology – Digitally recorded media for information interchange and storage – 120 mm Triple Layer (100,0 Gbytes single sided disk and 200,0 Gbytes double sided disk) and Quadruple Layer (128,0 Gbytes single sided disk) BD Recordable disk
* ISO/IEC 30192:2016 Information technology – Digitally recorded media for information interchange and storage – 120 mm Single Layer (25,0 Gbytes per disk) and Dual Layer (50,0 Gbytes per disk) BD Rewritable disk
* ISO/IEC 30193:2016 Information technology – Digitally recorded media for information interchange and storage – 120 mm Triple Layer (100,0 Gbytes per disk) BD Rewritable disk
* ISO 30300:2011 Information and documentation – Management systems for records – Fundamentals and vocabulary
* ISO 30301:2011 Information and documentation – Management systems for records – Requirements
* ISO 30302:2015 Information and documentation – Management systems for records – Guidelines for implementation
* ISO 30400:2016 Human resource management – Vocabulary
* ISO 30401:2018 Knowledge management system - Requirements
* ISO 30405:2016 Human resource management – Guidelines on recruitment
* ISO/TR 30406:2017 Human resource management – Sustainable employability management for organizations
* ISO/TS 30407:2017 Human resource management – Cost-Per-Hire
* ISO 30408:2016 Human resource management – Guidelines on human governance
* ISO 30409:2016 Human resource management – Workforce planning
*
ISO 30414:2018 Human resource management – Guidelines for internal and external human capital reporting
*
ISO 30415:2021 Human resource management — Diversity and inclusion
*
ISO 30500:2018 Non-sewered sanitation systems — Prefabricated integrated treatment units — General safety and performance requirements for design and testing
*
ISO 31000
ISO 31000 is a family of standards relating to risk management codified by the International Organization for Standardization. ISO 31000:2018 provides principles and generic guidelines on managing risks that could be negative faced by organizatio ...
:2018
Risk management – Principles and guidelines
* ISO/TR 31004:2013 Risk management – Guidance for the implementation of ISO 31000
*
ISO/IEC 31010 ISO/IEC 31010 is a standard concerning risk management codified by The International Organization for Standardization and The International Electrotechnical Commission (IEC). The full name of the standard is ISO.IEC 31010:2009 – Risk management â ...
:2009 Risk management – Risk assessment techniques
*
ISO 31030:2021 Travel risk management — Guidance for organizations
* ISO/IEC/IEEE 31320 Information technology –
Modeling Languages
A modeling language is any artificial language that can be used to express information or knowledge or systems in a structure that is defined by a consistent set of rules. The rules are used for interpretation of the meaning of components in the st ...
** ISO/IEC/IEEE 31320-1:2012 Part 1: Syntax and Semantics for
IDEF0
IDEF0, a compound acronym ("Icam DEFinition for Function Modeling", where ICAM is an acronym for "Integrated Computer Aided Manufacturing"), is a function modeling methodology for describing manufacturing functions, which offers a functional modeli ...
** ISO/IEC/IEEE 31320-2:2012 Part 2: Syntax and Semantics for
IDEF1X
Integration DEFinition for information modeling (IDEF1X) is a data modeling language for the development of semantic data models. IDEF1X is used to produce a graphical information model which represents the structure and semantics of information ...
97 (IDEFobject)
*
ISO 32000 Document management –
Portable document format
Portable Document Format (PDF), standardized as ISO 32000, is a file format developed by Adobe in 1992 to present documents, including text formatting and images, in a manner independent of application software, hardware, and operating systems. ...
*
ISO/IEC 33001:2015 Information technology – Process assessment – Concepts and terminology
* ISO/IEC 33002:2015 Information technology – Process assessment – Requirements for performing process assessment
* ISO/IEC 33003:2015 Information technology – Process assessment – Requirements for process measurement frameworks
* ISO/IEC 33004:2015 Information technology – Process assessment – Requirements for process reference, process assessment and maturity models
* ISO/IEC TR 33014:2013 Information technology – Process assessment – Guide for process improvement
* ISO/IEC 33020:2015 Information technology – Process assessment – Process measurement framework for assessment of process capability
* ISO/IEC TS 33030:2017 Information technology – Process assessment – An exemplar documented assessment process
* ISO/IEC TS 33052:2016 Information technology – Process reference model (PRM) for information security management
* ISO/IEC 33063:2015 Information technology – Process assessment – Process assessment model for software testing
* ISO/IEC 33071:2016 Information technology – Process assessment – An integrated process capability assessment model for Enterprise processes
* ISO/IEC TS 33072:2016 Information technology – Process assessment – Process capability assessment model for information security management
*
ISO 35001:2019 Biorisk management for laboratories and other related organisations
*
ISO 37000
ISO is the most common abbreviation for the International Organization for Standardization.
ISO or Iso may also refer to: Business and finance
* Iso (supermarket), a chain of Danish supermarkets incorporated into the SuperBest chain in 2007
* Iso ...
:2021 Governance of organizations — Guidance
*
ISO 37001
ISO 37001 ''Anti-bribery management systems - Requirements'' with guidance for use, is a management system standard published by International Organization for Standardization (ISO) in 2016. As the title suggests, this standard sets out the ...
:2016 Anti-bribery management systems
*
ISO 37120 Sustainable development of communities – Indicators for city services and quality of life
* ISO/TR 37137:2014 Cardiovascular biological evaluation of medical devices – Guidance for absorbable implants
* ISO 37500:2014 Guidance on outsourcing
*
ISO/IEC 38500
ISO/IEC 38500 is an international standard for Corporate governance of information technology published jointly by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It provides a fr ...
:2015 Information technology – Governance of IT for the organization
* ISO/IEC TS 38501:2015 Information technology – Governance of IT – Implementation guide
* ISO/IEC TR 38502:2014 Information technology – Governance of IT – Framework and model
* ISO/IEC TR 38504:2016 Governance of information technology – Guidance for principles-based standards in the governance of information technology
* ISO/IEC 38505 Information technology – Governance of IT – Governance of data
** ISO/IEC 38505-1:2017 Part 1: Application of ISO/IEC 38500 to the governance of data
*
ISO 39001
ISO 39001:2012 ''Road traffic safety (RTS) management systems - Requirements with guidance for use'' is an ISO standard for a management system (similar to ISO 9000) for road traffic safety. The implementation of the standard is intended to enable ...
:2012 Road traffic safety (RTS) management systems – Requirements with guidance for use
ISO 40000 – ISO 49999
* ISO/IEC 40180:2017 Information technology – Quality for learning, education and training – Fundamentals and reference framework
* ISO/IEC 40210:2011 Information technology –
W3C
The World Wide Web Consortium (W3C) is the main international standards organization for the World Wide Web. Founded in 1994 and led by Tim Berners-Lee, the consortium is made up of member organizations that maintain full-time staff working to ...
SOAP
Soap is a salt of a fatty acid used in a variety of cleansing and lubricating products. In a domestic setting, soaps are surfactants usually used for washing, bathing, and other types of housekeeping. In industrial settings, soaps are use ...
Version 1.2 Part 1: Messaging Framework (Second Edition)
* ISO/IEC 40220:2011 Information technology – W3C SOAP Version 1.2 Part 2: Adjuncts (Second Edition)
* ISO/IEC 40230:2011 Information technology – W3C SOAP Message Transmission Optimization Mechanism
* ISO/IEC 40240:2011 Information technology – W3C
Web Services Addressing 1.0 – Core
* ISO/IEC 40250:2011 Information technology – W3C Web Services Addressing 1.0 – SOAP Binding
* ISO/IEC 40260:2011 Information technology – W3C Web Services Addressing 1.0 – Metadata
* ISO/IEC 40270:2011 Information technology – W3C
Web Services Policy 1.5 – Framework
* ISO/IEC 40280:2011 Information technology – W3C Web Services Policy 1.5 – Attachment
* ISO/IEC 40314:2016 Information technology –
Mathematical Markup Language
Mathematical Markup Language (MathML) is a mathematical markup language, an application of XML for describing mathematical notations and capturing both its structure and content. It aims at integrating mathematical formulae into World Wide Web ...
(MathML) Version 3.0 2nd Edition
*
ISO/IEC 40500:2012 Information technology – W3C
Web Content Accessibility Guidelines
The Web Content Accessibility Guidelines (WCAG) are part of a series of web accessibility guidelines published by the Web Accessibility Initiative (WAI) of the World Wide Web Consortium (W3C), the main international standards organization for th ...
(WCAG) 2.0
* ISO 41011:2017 Facility management – Vocabulary
* ISO 41012:2017 Facility management – Guidance on strategic sourcing and the development of agreements
* ISO/TR 41013:2017 Facility management – Scope, key concepts and benefits
*
ISO/IEC 42010
ISO/IEC/IEEE 42010 ''Systems and software engineering — Architecture description'' is an international standard for architecture descriptions of systems and software.
Overview
ISO/ IEC/IEEE 42010:2011 defines requirements on the de ...
:2011 Systems and software engineering – Architecture description
*
ISO 42500:2021 Sharing economy - General principles
*
ISO 44001
ISO 44001 ''Collaborative business relationship management systemsRequirements and framework'' is an international standard published on 1 March 2017 by the International Organization for Standardization. It is based on British Standard BS 11000, i ...
:2017 Collaborative business relationship management systems — Requirements and framework
*
ISO 45001
ISO 45001 is an ISO standard for management systems of occupational health and safety (OHS), published in March 2018. The goal of ISO 45001 is the reduction of occupational injuries and diseases, including promoting and protecting physical and ...
Occupational health and safety management systems – Requirements with guidance for use
*
ISO 46001
ISO is the most common abbreviation for the International Organization for Standardization.
ISO or Iso may also refer to: Business and finance
* Iso (supermarket), a chain of Danish supermarkets incorporated into the SuperBest chain in 2007
* Is ...
:2019 Water efficiency management systems - -Requirements with guidance for use
ISO 50000 – ISO 59999
*
ISO 50001
ISO 50001 Energy management systems - Requirements with guidance for use, is an international standard created by the International Organization for Standardization (ISO). It supports organizations in all sectors to use energy more efficiently th ...
:2018
Energy management systems
An energy management system (EMS) is a system of computer-aided tools used by operators of electric utility grids to monitor, control, and optimize the performance of the generation or transmission system. Also, it can be used in small scale syste ...
– Requirements with guidance for use
* ISO 50002:2014 Energy audits – Requirements with guidance for use
* ISO 50003:2014 Energy management systems – Requirements for bodies providing audit and certification of energy management systems
* ISO 50004:2014 Energy management systems – Guidance for the implementation, maintenance and improvement of an energy management system
* ISO 50006:2014 Energy management systems – Measuring energy performance using energy baselines (EnB) and energy performance indicators (EnPI) – General principles and guidance
* ISO 50007:2017 Energy services – Guidelines for assessment and improvement of the energy service to users
* ISO 50015:2014 Energy management systems – Measurement and verification of energy performance of organizations—General principles and guidance
* ISO/TS 50044:2019 Energy saving projects (EnSPs) – Guideline for economic and financial evaluation
* ISO 50046:2019 General methods for predicting
energy savings
Energy conservation is the effort to reduce wasteful energy consumption by using fewer energy services. This can be done by using energy more effectively (using less energy for continuous service) or changing one's behavior to use less service (f ...
* ISO 50047:2016 Energy savings – Determination of energy savings in organizations
* ISO/ASTM 51026:2015 Practice for using the Fricke dosimetry system
* ISO/ASTM 51205:2017 Practice for use of a ceric-cerous sulfate dosimetry system
* ISO/ASTM 51261:2013 Practice for calibration of routine dosimetry systems for radiation processing
* ISO/ASTM 51275:2013 Practice for use of a radiochromic film dosimetry system
* ISO/ASTM 51276:2012 Practice for use of a polymethylmethacrylate dosimetry system
* ISO/ASTM 51310:2004 Practice for use of a radiochromic optical waveguide dosimetry system
* ISO/ASTM 51401:2013 Practice for use of a dichromate dosimetry system
* ISO/ASTM 51431:2005 Practice for dosimetry in electron beam and X-ray (bremsstrahlung) irradiation facilities for food processing
* ISO/ASTM 51538:2009 Practice for use of the ethanol-chlorobenzene dosimetry system
* ISO/ASTM 51539:2013 Guide for use of radiation-sensitive indicators
* ISO/ASTM 51540:2004 Practice for use of a radiochromic liquid dosimetry system
* ISO/ASTM 51607:2013 Practice for use of the alanine-EPR dosimetry system
* ISO/ASTM 51608:2015 Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing at energies between 50 keV and 7.5 MeV
* ISO/ASTM 51631:2013 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimetery system calibrations
* ISO/ASTM 51649:2015 Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV
* ISO/ASTM 51650:2013 Practice for use of a cellulose triacetate dosimetry system
* ISO/ASTM 51702:2013 Practice for dosimetry in a gamma facility for radiation processing
* ISO/ASTM 51707:2015 Guide for estimation of measurement uncertainty in dosimetry for radiation processing
* ISO/ASTM 51818:2013 Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keV
* ISO/ASTM 51900:2009 Guide for dosimetry in radiation research on food and agricultural products
* ISO/ASTM 51939:2017 Practice for blood irradiation dosimetry
* ISO/ASTM 51940:2013 Guide for dosimetry for sterile insects release programs
* ISO/ASTM 51956:2013 Practice for use of a thermoluminescence-dosimetry system (TLD system) for radiation processing
* ISO/ASTM 52116:2013 Practice for dosimetry for a self-contained dry-storage gamma irradiator
* ISO/ASTM 52303:2015 Guide for absorbed-dose mapping in radiation processing facilities
* ISO/ASTM 52628:2013 Standard practice for dosimetry in radiation processing
* ISO/ASTM 52701:2013 Guide for performance characterization of dosimeters and dosimetry systems for use in radiation processing
* ISO/ASTM 52900:2015 Additive manufacturing – General principles – Terminology
* ISO/ASTM 52915:2016 Specification for
additive manufacturing file format (AMF) Version 1.2
*
ISO 55000
ISO 55000 is an international standard covering management of assets of any kind. Before it, a Publicly Available Specification (PAS 55) was published by the British Standards Institution in 2004 for physical assets. The ISO 55000 series of Asset ...
:2014 Asset management – Overview, principles and terminology
*
ISO 55001
ISO 55001 ''Asset management – Management systems – Requirements'' is a standard developed for the use of people or organizations involved in asset management. This standard was developed by ISO technical committeISO/TC 251 ISO 55001 was publi ...
:2014 Asset management – Management systems – Requirements
* ISO 55002:2014 Asset management – Management systems – Guidelines for the application of ISO 55001
*
ISO 56000
The ISO 56000 is a family of standards designed to provide a framework for organizations to implement, maintain and improve innovation management systems.Ullberg, Eskil, Leif Edvinsson, and Carol Yeh-Yun Lin. "Discussions of Further Dimensions." In ...
:2020 Innovation management — Fundamentals and vocabulary
*
ISO 56002
ISO is the most common abbreviation for the International Organization for Standardization.
ISO or Iso may also refer to: Business and finance
* Iso (supermarket), a chain of Danish supermarkets incorporated into the SuperBest chain in 2007
* Iso ...
:2019 Innovation management — Innovation management system — Guidance
*
ISO 56003:2019 Innovation management - Tools and methods for innovation partnership - Guidance
*
ISO/TR 56004:2019 Innovation Management Assessment — Guidance
*
ISO 56005:2020 Innovation management — Tools and methods for intellectual property management — Guidance
ISO 60000 – ISO 69999
The 60000 series is reserved for
IEC
The International Electrotechnical Commission (IEC; in French: ''Commission électrotechnique internationale'') is an international standards organization that prepares and publishes international standards for all electrical, electronic and r ...
-lead standards.
*
ISO/IEC 60559:2020 Information technology — Microprocessor Systems — Floating-Point arithmetic
ISO 80000 – ISO 89999
The 80000 series is reserved for multi-part standards jointly developed by ISO and
IEC
The International Electrotechnical Commission (IEC; in French: ''Commission électrotechnique internationale'') is an international standards organization that prepares and publishes international standards for all electrical, electronic and r ...
, in which some parts are published by ISO and others by IEC.
*
ISO/IEC 80000
ISO 80000 or IEC 80000 is an international standard introducing the International System of Quantities (ISQ).
It was developed and promulgated jointly by the International Organization for Standardization (ISO) and the International Electrotech ...
Quantities and units
* ISO/IEC 80001 Application of risk management for IT-networks incorporating medical devices
** IEC 80001-1:2010 Part 1: Roles, responsibilities and activities
** IEC/TR 80001-2-1:2012 Part 2-1: Step by Step Risk Management of Medical IT-Networks; Practical Applications and Examples
** IEC/TR 80001-2-2:2012 Part 2-2: Guidance for the communication of medical device security needs, risks and controls
** IEC/TR 80001-2-3:2012 Part 2-3: Guidance for wireless networks
** IEC/TR 80001-2-4:2012 Part 2-4: General implementation guidance for Healthcare Delivery Organizations
** IEC/TR 80001-2-5:2014 Part 2-5: Application guidance – Guidance for distributed alarm systems
** ISO/TR 80001-2-6:2014 Part 2-6: Application guidance – Guidance for responsibility agreements
** ISO/TR 80001-2-7:2015 Part 2-7: Guidance for healthcare delivery organizations (HDOs) on how to self-assess their conformance with IEC 80001-1
** IEC/TR 80001-2-8:2016 Part 2-8: Application guidance – Guidance on standards for establishing the security capabilities identified in IEC 80001-2-2
** IEC/TR 80001-2-9:2017 Part 2-9: Application guidance – Guidance for use of security assurance cases to demonstrate confidence in IEC/TR 80001-2-2 security capabilities
* IEC/TR 80002 Medical device software
** IEC/TR 80002-1:2009 Part 1: Guidance on the application of ISO 14971 to medical device software
** ISO/TR 80002-2:2017 Part 2: Validation of software for medical device quality systems
** IEC/TR 80002-3:2014 Part 3: Process reference model of medical device software life cycle processes (
IEC 62304)
*
ISO/TS 80004 The ISO/TS 80004 series of standards, from the International Organization for Standardization, describe vocabulary for nanotechnology and its applications. These were largely motivated by health, safety and environment concerns, many of them origin ...
Nanotechnologies
Nanotechnology, also shortened to nanotech, is the use of matter on an atomic, molecular, and Supramolecular complex, supramolecular scale for industrial purposes. The earliest, widespread description of nanotechnology referred to the particul ...
– Vocabulary
* ISO/IEC 80079 Explosive atmospheres
** ISO/IEC 80079-20-1:2017 Part 20-1: Material characteristics for gas and vapour classification — Test methods and data
** ISO/IEC 80079-20-2:2016 Part 20-2: Material characteristics — Combustible dusts test methods
** ISO/IEC 80079-34:2018 Part 34: Application of quality management systems for Ex Product manufacture
** ISO 80079-36:2016 Part 36: Non-electrical equipment for explosive atmospheres — Basic method and requirements
** ISO 80079-37:2016 Part 37: Non-electrical equipment for explosive atmospheres — Non-electrical type of protection constructional safety
''c'', control of ignition sources
''b'', liquid immersion ''k''
** ISO/IEC 80079-38:2016 Part 38: Equipment and components in explosive atmospheres in underground mines
* ISO/IEC 80369 Small-bore connectors for liquids and gases in healthcare applications
** ISO 80369-1:2010 Part 1: General requirements
** ISO 80369-3:2016 Part 3: Connectors for enteral applications
** IEC 80369-5:2016 Part 5: Connectors for limb cuff inflation applications
** ISO 80369-6:2016 Part 6: Connectors for neuraxial applications
** ISO 80369-7:2016 Part 7: Connectors for intravascular or hypodermic applications
** ISO 80369-20:2015 Part 20: Common test methods
* ISO/IEC 80416 Basic principles for graphical symbols for use on equipment
** IEC 80416-1:2008 Part 1: Creation of graphical symbols for registration
** ISO 80416-2:2001 Part 2: Form and use of arrows
** IEC 80416-3:2002 Part 3: Guidelines for the application of graphical symbols
** ISO 80416-4:2005 Part 4: Guidelines for the adaptation of graphical symbols for use on screens and displays (icons)
* ISO/IEC 80601 Medical electrical equipment
** ISO 80601-2-12:2011 Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators
** ISO 80601-2-13:2011 Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation
** IEC 80601-2-30:2009 Part 2-30: Particular requirements for basic safety and essential performance of automated non-invasive sphygmomanometers
** ISO 80601-2-55:2011 Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors
** ISO 80601-2-56:2017 Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement
** IEC 80601-2-58:2014 Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
** IEC 80601-2-59:2017 Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening
** IEC 80601-2-60:2012 Part 2-60: Particular requirements for basic safety and essential performance of dental equipment
** ISO 80601-2-61:2017 Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
** ISO 80601-2-67:2014 Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment
** ISO 80601-2-69:2014 Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment
** ISO 80601-2-70:2015 Part 2-70: Particular requirements for basic safety and essential performance of sleep apnoea breathing therapy equipment
** IEC 80601-2-71:2015 Part 2-71: Particular requirements for the basic safety and essential performance of functional Near-Infrared Spectroscopy (NIRS) equipment
** ISO 80601-2-72:2015 Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients
** ISO 80601-2-74:2017 Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment
* ISO 81060 Non-invasive
sphygmomanometers
** ISO 81060-1:2007 Part 1: Requirements and test methods for non-automated measurement type
** ISO 81060-2:2018 Part 2: Clinical investigation of intermittent automated measurement type
* ISO/IEC 81346 Industrial systems, installations and equipment and industrial products – Structuring principles and reference designations
** IEC 81346-1:2009 Part 1: Basic rules
** IEC 81346-2:2009 Part 2: Classification of objects and codes for classes
** ISO/TS 81346-3:2012 Part 3: Application rules for a reference designation system
** ISO/TS 81346-10:2015 Part 10: Power plants
* ISO/IEC 81714 Design of graphical symbols for use in the technical documentation of products
** ISO 81714-1:2010 Part 1: Basic rules
** IEC 81714-2:2006 Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange
** IEC 81714-3:2004 Part 3: Classification of connect nodes, networks and their encoding
ISO 90000 – ISO 99999
*
ISO/IEC/IEEE 90003:2018 Software engineering — Guidelines for the application of ISO 9001:2015 to computer software
* ISO/IEC TR 90005:2008 Systems engineering — Guidelines for the application of ISO 9001 to system life cycle processes
ithdrawn without replacement* ISO/IEC TR 90006:2013 Information technology — Guidelines for the application of ISO 9001:2008 to IT service management and its integration with ISO/IEC 20000-1:2011
ithdrawn without replacement
Notes
References
External links
International Organization for StandardizationISO Certification Provider
{{International Organization for Standardization
International Organization for Standardization
The International Organization for Standardization (ISO ) is an international standard development organization composed of representatives from the national standards organizations of member countries. Membership requirements are given in Ar ...